Votos - 2, Puntuación media: 5
(
)
)
|
Resumen del manual
3. PARK 7 14 11 9 14 11 8 9 16 15 7 13 11 9 14 7 15 16 8 14 8 9 15 16 7 13 12 18 17 2 4. President - Comfort 5. Royal 6. Pro 16 7. Pro 20 8. 9. PARK PARK 10. 11. Briggs & Stratton Honda 12. 13.Royal 14. Pro 16 - Pro 20 15. President - Comfort 16. Royal 17. Pro 16 - Pro 20 PARK PARK 0.75 mm 18. Pro 20 Cat 19. 20. 21. MAX 22. 23a. President - Comfort - Royal 23b. Pro 16 - Pro 20 24. President - Comfort -Royal ENGLISH EN ENGLISH EN GENERAL This symbol indicates WARNING. Personal injury and/or damage to property may result if the instructions are not followed carefully. You must read these instructions for use and the accompanying pamphlet “SAFETY INSTRUCTIONS” carefully, before starting up the machine. SYMBOLS The following symbols appear on the machine. They are there to remind you of the care and attention required in use. This is what the symbols mean: Warning! Read the instruction manual and the safety manual before using the machine. Warning! Watch out for discarded objects. Keep onlookers away. Warning! Always wear hearing protectors. Warning! This machine is not designed to be driven on public roads. Warning! The machine, equipped with original accessories, must not be driven in any direction on slopes with a gradient greater than 10.. Warning! Risk of crushing injuries. Keep hands and feet well away from the articulated steering joint. Warning! Risk of burn injuries. Do not touch the silencer/catalytic converter. CONTROLS AND INSTRUMENTS Items 1 - 19, see figures 1 - 7. 1. IMPLEMENT LIFTER (President - Comfort - Royal - Pro16) A pedal for raising front-mounted implement to the transport position. To lift up the implement, press the pedal down as far as it will go. Then release the pedal, the implement lifter is now locked in the raised position. To lower the implement, press the pedal down sothat the lock is released. Lower the implement lifter to the working position by slowly lifting your foot from the pedal. 2. HYDRAULIC LIFTER (Pro20) Hydraulic implement lifter for raising front- mounted implements to the transport position. To raise the implement, press the rearpart of the switch. Release the switch in the required position. To lower the accessory, press the front part of the switch. The switch stays in the pressed position and the implement lifter is lowered until itreaches a floating position. This means that the implement can follow the contours of the ground. The floating position, with the switch in the tilted forward position, is recommended for normal use. To secure the implement lifter, place the switch in neutral. NOTE! The hydraulic implement lifter must be in floating position in order for the power takeoff to be connected. 3. SERVICE BRAKE A pedal that acts on the machine’s braking system. There are 3 positions: 1. Pedal released – service brake not activated. 2. Pedal depressed halfway – forward drive disengaged. Service brake not activated. 3. Pedal fully depressed – forward drive disengaged. Service brake fully activated. 4. PARKING BRAKE An inhibitor that can lock the brake pedal in the depressed position. Depress the brake pedal fully. Move the inhibitor to the right and then release the brake pedal. The parking brake is released by pressing the brake pedal. The spring-loaded inhibitor slides to one side. Make sure that the parking brake is released when operating the machine. ENGLISH EN ENGLISH EN 5. DRIVE PEDAL A pedal that activates the variable transmission. 1. Depress the pedal with the ball of your foot – the machine moves forwards. 2. No load on the pedal – the machine is stationary. 3. Depress the pedal with your heel – the machine reverses. The drive pedal regulates the speed. The more pressure applied, the faster the machine will move. 6. ADJUSTABLE STEERING WHEEL The height of the steering wheel is infinitely adjustable. Undo the adjustment knob on the steering column and raise or lower the steering wheel to the desired position. Tighten. Do not adjust the steering wheel during operation. 7. THROTTLE/CHOKE CONTROL A control for setting the engine speed and to choke the engine when starting from cold. (The latter does not apply to Royal-Pro16-Pro20 - Excellent which have separate choke control – see item 8). 1. Choke – for starting a cold engine. The choke is located in top of groove (does not apply to Royal-Pro16-Pro20 - Excellent). Avoid operating the machine in this position, taking care to move the control to full throttle (see below) when the engine is warm. 2. Full throttle – when the machine is in operation, full throttle should always be used. 3. Idling. 8. CHOKE CONTROL (Royal - Pro16 - Pro20 - Excellent) A pull-type control to choke the engine when starting from cold. 1. Control fully pulled out – choke valve in carburettor closed. For starting cold engine. 2. Control pushed in – choke valve open. For starting warm engine and when operating the machine. Never operate the machine with the choke pulled out when the engine is warm. 9. IGNITION LOCK/SPOTLIGHT Ignit...