Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
Model # 8181BT Nursery Center & Playard Instruction Manual Convenience through Innovation and thoughtful design 03.04 Nursery Care Center & Playard LXI Read all instructions BEFORE assembly and USE of Playard. Keep Instructions for future use. WARNING: FAILURE TO FOLLOW THESE WARNINGS AND THE ASSEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH FROM ENTRAPMENT, STRANGULATION, SUFFOCATION, ETC. INFANTS CAN SUFFOCATE: IN GAPS BETWEEN AN EXTRA MATTRESS AND SIDE OF PRODUCT, OR ON SOFT BEDDING. NEVER ADD A MATTRESS, PILLOW, COMFORTER OR PADDING. USE ONLY MATTRESS PROVIDED BY MANUFACTURER. • IF REFINISHING, USE A NONTOXIC FINISH SPECIFIED FOR CHILDREN.S PRODUCTS. • DO NOT LEAVE CHILD IN PRODUCT WITH SIDE LOWERED. • BE SURE SIDE IS IN RAISED AND LOCKED POSITION WHENEVER CHILD IS IN PRODUCT. • The Playard, including side rails, must be fully erect prior to use. Make sure locks are secure. • Discontinue use of the Playard when child is able to climb out or reaches the height of 35 inches (890 mm) or the weight of 30 lbs.. (14 kg) • When child is able to pull to a standing position, remove bumper pads, large toys, and other objects that could serve as steps for climbing out. • Never leave your child unattended. • Strings can cause strangulation! DO NOT place items with a string around the child.s neck, such as hood strings or pacifier cords. DO NOT suspend strings over a Playard/crib or attach strings to toys. • DO NOT place the Playard near a window where cords from blinds or drapes can strangle a child. DO NOT add padding or other objects inside the Playard that will permit your child to climb out. Keep Playard awayfrom stoves, heaters, campfires and other hazards. • Never use plastic shopping bags or other plastic film as mattress covers not sold and intended for that purpose. They can cause suffocation. • Before each usage or assembly, inspect product for damaged hardware, loose joints, missing parts, or sharp edges. DO NOT use Playard if any parts are missing or broken. Please contact Baby Trend Customer Service for replacement parts, repair or instructional literature if needed. DO NOT substitute parts. • DO NOT use a water mattress with this product. • This product is not intended for commercial use. MAINTENANCE AND CLEANING INSTRUCTIONS: *Use only household soap or detergent and warm water. *NO BLEACH. Please: If you experience any difficulty with the use of our product or have a question regarding these instructions, please contact our Customer Service Department at (800) 328-7363 between the hours of 8:00 a.m. and 4:30 p.m. Pacific Standard Time. Please do not return the product to the store as once it is returned it cannot be re-sold and the materials and energy used to make it are wasted. To Contact Us: Baby Trend, Inc. Customer Service Hot Line 1567 S. Campus Ave. (800) 328-7363 Ontario, CA 91761 8:00 a.m. to 4:30 p.m. Pacific Standard Time 2 FOR THE SAFETY OF YOUR CHILD, PLEASE READ THE INSTRUCTIONS COMPLETELY BEFORE ASSEMBLING THE PLAYARD, BASSINET AND CHANGING AREA TO ASSEMBLE PLAYARD Before you begin: The Baby Trend Playard is designed so that, when properly setup, the fabric of the playard places pressure on the 4 top rails making them nearly impossible to unlock. This safety feature is activated when you push down on the playard floor to lock the bottom rails. When setting up the playard, if you allow the bottom rails to lock before locking the top rails, the fabric pressure will not allow you to lock the top rails. Please see (Fig. 3.) for the proper position of the bottom of the playard when locking the top rails. 1. Unzip bag and remove Playard frame (Fig. 1). Undo the 3 Velcro straps and set mattress aside (Fig. 2). 2. Stand Playard on legs keeping feet of playard close together as shown in figure 3. Pull up on top rails until all rails “click” and “lock”. 3. Push down on center of Playard floor until it is flat and locks into position (Fig. 4). The center lock mechanism will lock automatically. The center lock will rotate clockwise about 90 degrees as it locks. NOTE: Test rails to make sure they are locked. Push down on each rail making sure they are rigid and in a set position. See figure 5 and 6. 4. Place mattress in Playard with padded side up (Fig. 7). NOTE: DO NOT insert mattress if using bassinet feature. Go to bassinet instructions. 5. Feed the 6 Velcro straps (found underneath the mattress), 3 on each end of the mattress pad, through the slots on the bottom of the sides of the Playard. Fasten the Velcro tabs to the underside of Playard to prevent the mattress from moving (Fig. 8) (Fig. 9). Figure 1. Figure 2. Figure 3 Figure 4 Figure 5 3Figure 6 6. Attach the organizer, to any side of the playard, by pushing the plastic clips down over the top rail. (Fig. 10). The maximum weight capacity of the organizer is 3 pounds. Playard assembly is now complete and ready to use. Figure 7 Figure 8 Figure 9 Figure 10 Figure 11 FOLDING PLAYARD To operate the brakes on the wheels, press downw...