Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
· Avoid serious injury from falling or sliding out. Always use seat belt. · Never leave child unattended. · Never use this stroller with roller skates or in-line skates. · Never allow stroller to be used as a toy or allow children to give rides to others. · Never use stroller if it becomes damaged. · Always be aware of traffic around you when walking or jogging. · Always engage brakes when you stop or when you let go of handle. · Always use wrist strap. · Accessories or parcels placed in or on the stroller may cause it to become unstable. · Maximum weight for objects in back pouch is 2.2 lbs. or 1 kg. Double 2.2 lbs. or 1 kg. in each back pouch. Excessive weightmay cause a hazardous, unstable condition. · Child may slip into leg openings and strangle. Never use in a reclined carriage position unless T-shield and shoulder strap placement has been readjusted to the seat’s new position. IMPORTANT: Read and follow these Safety Rules and Assembly Instructions before operating stroller. If you have any questions concerning the safe use of this product, contact Pacific Cycle at 1-800-242-6110, M-F, 8:00 a.m.-5:00 p.m. CST or visit us at or E-mail us at info@instep.net before using. IMPORTANT: Tires are shipped deflated, DO NOT OVERINFLATE. Please inflate slowly, with short bursts, to 20-25 PSI maximum. 25 PSI will provide a comfortable ride for your child. PLEASE DO NOT RETURN PRODUCT TO THE STORE. To ensure prompt and correct handling of problems, or to answer questions, please contact us at either our Toll-Free Customer Service number (1.800.242.6110) or E-mail us at info@instep.net. Service will be quicker if you have your model number (found on the product and box) along with this instruction sheet ready when calling. If you have any questions concerning the safe use of this product, please contact us immediately. {Figure 1.a} canopy handle locking pin frame parking brake rear wheel foot plate M3_double_Platform.indd 2 9/26/05 3:54:14 PM Parts List: Description Qty. Frame assembly with seat, canopy, and wrist strap 1 Front Wheel 1 Parent Console 1 Under-seat Basket 1 Rear Wheels 2 Front Fender 1 #8 – 11.2" Phillips head screws 4 Tools Required: Phillips screw driver, adjustable wrench. Stroller Assembly Instructions Unfold Stroller: Remove from carton, and remove any packaging materials that may be holding the frame in closed position. Grasp the handle and open the frame. The stroller will lock into place. To ensure the stroller is locked, push the handle down lightly. Be sure the stroller is locked in place before placing a child in the stroller. Rear Wheel Assembly Grasp rear wheel in one hand, slide wheel’s axle into hole in rear of frame. Push up on the axle release lever so that the wheel is fully inserted. Pull the wheel firmly, the wheel should not come off if fully inserted/locked. Repeat for other o release wheel push up on axle release lever and pull off wheel. Front Wheel Assembly Tip stroller back so that the handlebar is down on the ground and the front fork is up. Attach the front wheel by loosening the wheel’s Quick Release (Q/R) lever on the front wheel far enough to allow the axle to slide into the front fork. With s Q/R lever in open position, hand tighten the cone nut until almost tight, s Q/R lever backward to the closed position to lock wheel in place. Note this step may require minor adjustment until the Q/R lever flips back m pressure. Pull outward on wheel to ensure it is locked in place. y installed and do not need adjustment. Close the front caliper brake by lowering the Q/R lever. Spin the front wheel to make sure the brake pads do not rub and are properly aligned to the rim. If brake pad alignment is off, loosen brake pad nut with an adjustable wrench, align brake pad and retighten nut while holding brake pad in place. Caution: Always be sure to reengage the brake by rotating the Q/R lever forward (toward the front wheel) before using the stroller. IMPORTANT If you notice that the stroller steers to one direction you may need to adjust the front wheel to align it. To do so loosen the front axle Q/R lever, points the front wheel in the opposite direction the stroller is veering, and retighten the Q/R lever. If you need help making this adjustment, please call our Customer Service department for assistance. quick-releaselever (open position) Front Wheel Assembly Operating Instructions Run Around™ 11-BA201, 11-BA202...page 2 Rear Wheel Assembly quick-releaselever (open position) Front Wheel Assembly Operating Instructions Run Around™ 11-BA201, 11-BA202...page 2 Rear Wheel Assembly M3_double_Platform.indd 3 9/26/05 3:54:17 PM To recline seat To fully recline, unhook buckle on back of the seat.To adjust the recline position; adjust the slide on the strap to the desired length. WARNING: Child may slip into leg openings and strangle. Never use in a reclined carriage position unless T-shield and shoulder strap have been readjusted to the new seat position. Storage and folding...
Otros modelos de este manual:el transporte de niños - 11-BA201 (627.81 kb)