Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
At higher settings, a softer sound starts VOX recording. At lower settings, a louder sound starts VOX recording. • The built-in automatic level control (ALC) automatically sets the recording level once recording starts. • When you use the VOX feature, recording begins when the recorder picks up sound and stops a few seconds after the sound stops. 5. For maximum clarity, place the recorder as close to the sound source as possible, with nothing between the source and the recorder that might block the sound. 6. To temporarily stop recording, slide PAUSE to ON. To resume recording, slide PAUSE back. 7. Recording stops when the tape reaches the end of the cassette. To stop it sooner, press STOP/EJECT. 16 14-1168.fm Page 17 Thursday, January 20, 2000 2:05 PM Manual Recording 1. Set VOX to OFF. 2. Load a tape. 3. Set TAPE SPEED to 1.2 to double the recording time, or to 2.4 for better sound quality. 4. Press REC (PLAY also locks down). Recording starts and the built in automatic level control sets the recording level. 5. Recording automatically stops when the tape reaches its end. To stop recording sooner, press STOP/EJECT. Quick Record During playback, you can press REC to immediately start recording without first pressing STOP/EJECT. 17 14-1168.fm Page 18 Thursday, January 20, 2000 2:05 PM PLAYING A TAPE 1. Load the microcassette tape. 2. Set TAPE SPEED to the speed used when the tape was recorded. 3. Press PLAY to begin play. 18 14-1168.fm Page 19 Thursday, January 20, 2000 2:05 PM 4. Adjust VOLUME to a comfortable listening level. 5. The tape automatically stops when it reaches the end. Press STOP/EJECT to stop playback sooner. Rewinding/Fast-Forwarding Slide REW/REVIEW FAST-F/CUE to REW/REVIEW to rewind a tape, or to FAST-F/CUE to fast-forward a tape. 19 14-1168.fm Page 20 Thursday, January 20, 2000 2:05 PM Caution: To protect the tape-handling parts, press STOP/EJECT or slide REW/REVIEW FAST-F/CUE to the center when the tape reaches the end. To hear the tape play at a faster speed as it fast-forwards or rewinds, slide REW/REVIEW FAST-F/CUE to REW/REVIEW or FAST-F/CUE during playback, When you release the switch, normal playback resumes. QUICK REVIEW During recording, slide REW/REVIEW FAST-F/ CUE to REW/REVIEW to hear a portion of what you have just recorded without first pressing STOP/EJECT and PLAY. Press REC to resume recording. 20 14-1168.fm Page 21 Thursday, January 20, 2000 2:05 PM USING THE TAPE COUNTER You can use the tape counter to note different locations on your tape during recording or playback. 000 Before playing or recording a tape, rewind the tape completely and press the counter reset button to set the counter to 000. As the tape moves, the counter advances. 21 14-1168.fm Page 22 Thursday, January 20, 2000 2:05 PM TAPE TIPS STORING CASSETTE TAPES Do not expose microcassette tapes to high temperatures, high humidity, dust or dirt, or motors, transformers, or other sources of strong magnetic fields. RESTORING TAPE TENSION AND SOUND QUALITY After you play a microcassette tape several times, the tape might become tightly wound on the reels. This can cause playback sound quality to deteriorate. To restore the sound quality, fast-forward the tape from the beginning to the end of one side, then completely rewind it. Then loosen the tape reels by gently tapping each side of the cassette’s outer shell on a flat surface. Caution: Be careful not to damage the micro- cassette when tapping it. Do not touch the exposed tape or allow any sharp objects near the cassette. 22 14-1168.fm Page 23 Thursday, January 20, 2000 2:05 PM ERASING TAPES To record over a microcassette tape, simply record as usual. The tape recorder records over the previous recording. You can quickly erase both sides of a cassette tape using a RadioShack bulk tape eraser. PREVENTING ACCIDENTAL ERASURE Microcassette tapes have two erase-protection tabs — one for each side. When a tab is in place, you can record on that side. To prevent accidental erasure of a tape recording, use a screwdriver to remove one or both of the cassette tape’s erase protection 23 14-1168.fm Page 24 Thursday, January 20, 2000 2:05 PM tabs. This prevents RECORD from being pressed. Side A Tab If you later decide to record on a tape side after you have removed the erase-protection tab, place a piece of strong plastic tape over that side’s erase-protection hole. Be sure you cover only the hole originally covered by the erase-protection tab. Caution: Removing the erase-protection tabs does not prevent a bulk eraser from erasing a microcassette tape. 24 14-1168.fm Page 25 Thursday, January 20, 2000 2:05 PM CARE To enjoy your Your Optimus Micro-40 Micro Cassette Recorder for a long time: • Keep the recorder dry. If it gets wet, wipe it dry immediately. • Handle the recorder gently and carefully. Don’t drop it. • Use and store the recorder only in normal temperature environments. • Keep the recorder away from dust and dirt. • Wipe the recorder with a damp cloth occasional...
Otros modelos de este manual:Dictado - 14-1168 (792.12 kb)