Votos - 4, Puntuación media: 4.3
(
)
)
|
Fotos y especificaciones Olympus DM-550 |
Resumen del manual
• Please refer to P.44, P.45 for details on menu settings. 2 Press the + or . button to select a preset number. • Press the 9 button to show the [Day] and the [Time] set for the preset number the cursor is pointing at. 60 EN Menu setting method [Time] setting: 1 Press the 9 or 0 button to select "Hour"and "Minute" in the [Start Time] and "Hour" and "Minute" in the [Stop Time]. 2 Press the + or – button to set. 3 Press the OK button to exit [Time] selection. [Rec Mode] setting: Regardless of the regular [Rec Mode]( P.47), timer recording will start in a set recording mode. 1 Press the + or – button to select a recording mode. 2 Press the OK or 9 button. 3 Press the + or – button to select a recording rate. 4 Press the OK button to exit Recording mode selection. [Folder] setting: 1 Press the + or – button to select the destination to save to (Memory) (For DM-550) 2 Press the OK or 9 button to move to the [Folder] setting. 3 Press the + or – button to select the destination to save to (Folder). 4 Press the OK button to exit [Folder] setting selection. [Mic Sense] setting: Regardless of the recorder’s microphone sensitivity setting (..P.47), timer recording will start at a set microphone sensitivity. 1 Press the + or – button to select from [High], [Middle], and [Low]. 2 Press the OK button to exit [Mic Sense] selection. Completing the setting. 1 Pressing + or . button to select [Finish]. 2 Press the OK button to complete the setup screen. 6 Programmed settings will be applied and the screen will return to the preset number selection menu. If the [On/Off] setting is set to [On], will appear on the display. a When setting to [On] a 7 When setting other preset numbers, repeat Steps 2 through 6. When the 9 button is pressed in the Select in Advance Menu, the settings selected can be confirmed. Press the F2 or STOP 4 button to complete the setting. • The will appear on the display. 4 Menu setting method Notes • If the recorder is in use at the preset start time, the timer recording will start directly after stopping the recorder. • Even if the power if turned o& or the recorder is put on Hold, timer recording will start at a speci"ed time. • If three timer recordings have the same starting times, [Preset 1] has the highest priority and [Preset 3] has the lowest. • If the starting time for timer recording and alarm playback (.. P.64) is set for the same time, timer recording will have priority. • If the batteries run out while recording based on the timer setting, the recorder will stop recording. Check the battery power before starting the timer recording. EN 61 Menu setting method • If the [Time & Date] is not correct, timer recording cannot be set at the speci"ed time, so make sure the [Time & Date] is correct before setting timer recording. If it is not correct, reset [Time & Date] ( P.20). • The recorder will record in the built-in memory [Folder A] when the microSD card is selected as the recording destination and the microSD card is not inserted during Timer Recording. Setting the Recording Scene [Rec Scene] The recording setting can be selected from the [Dictation], [Conference], [Lecture] templates to suit the recording scene or situation. You can also save a recording setting of your choice. +. button 90 button OK button STOP button F2 button Menu setting method 1 Select [Rec Scene] from the menu in [Rec Menu]. • Please refer to P.44, P.45 for details on menu settings. 62 2 Press the + or . button to select the item to set. 3 Press the OK or 9button to move to Settings. When [Scene Select] is selected: 1 Press the + or – button to select the recording scene you want to set. 2 Press the OK button to complete the selection. • To confirm the respective recording scene settings, press the + or – button in the [Scene Select] screen to select the item you want to confirm, then press the 9 button to confirm in the setting confirmation screen. To end the setting confirmation screen, press the F1 button and the display will return to the [Scene Select] screen. • When the recorder is stopped, pressing and holding the F2 button will return the screen to [Scene Select]. 4 EN Menu setting method When [Scene Save] is selected: Besides the [Rec Scene] templates found in the recorder, you can also save the menu settings of a recording you have set to your choice. 1 Press the + or – button to select the [User Setting] you want to save. 2 Press the OK button to complete the settings. 4 4 Press the F2 or STOP 4 button to complete the setting. Menu setting method Template for Setting a Recording scene In [Scene Select], you can select a recording scene that is most suitable for the recording scene or situation from three templates. The recording settings for the respective recording scenes are as follows. Record Setting [Mic Sense] [Rec Mode] [Rec Level] [Zoom Mic] [Low Cut Filter] [VCVA] [Standby] Recording Scene Off Middle ST XQ Auto Off Off Off On Dictation Conference Lecture Low Middle High HQ ST XQ ST XQ Auto Auto Auto O...
Otros modelos de este manual:Dictado - DM-450 (4.58 mb)