Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
This will move the current message to the last position in the other folder ([A] to [B] or [B] to [A]). Messages in folder [S] cannot be moved to another folder. 13 ADDITIONAL FEATURES Schedule Recording 1 3 1 Press the MENU/FOLDER button for less than 1 second to select folder [S]. 2 Select the date for which you want to record a schedule by pressing the ( ) or ( ) button. 3 Press the REC button. The red LED indicator lights and recording starts. 4 Press the STOP button to stop Recording. The recorder enters the Stop mode. Schedule Playback 2 1 In the Stop mode, press the ( ) or ( ) button for less than 1 second to select the date for the schedule you want to check. When the ( ) or ( ) button is pressed and held for more than 1 second in the Stop mode, the recorder will stop at the date where the next message is recorded. 2 Press the PLAY button. All messages recorded for the selected date will be played in succession. 3 Press the STOP button to stop Playback. The voice recorder enters the Stop mode. Messages in folder [S] cannot be forward skipped or reverse skipped in the Stop mode. Forward Skip and Reverse Skip are available only during Playback, Fast Playback or Playback-Pause operation. 14 Message Alarm Playback . Setting the message alarm 1 2 3 1 Select the message you want to play as an alarm by pressing the ( ) or ( ) button so that the message No. is displayed in the LCD. 2 Press and hold the MENU/ FOLDER button for more than 1 second. Then after pressing the ( ) button three times to select the [ALARM] setting in the Options mode, press the MENU/ FOLDER button again to enter the [ALARM] screen. 3 Each time you press the MENU/ FOLDER button, the date/time items start to blink in order of “month”, “date”, “hour” and “minute”. Set the desired date and time for alarm playback by pressing the ( ) or ( ) button. When you have finished alarm setting, press the STOP button. After the alarm has gone off, the alarm setting for that message will be canceled. Up to 20 alarm messages can be set. Alarm messages cannot be set if 20 messages have already been set or the message No. being selected is No. 0. To cancel a set alarm message, select the set alarm message No., perform operations in steps 2 and 3, then press the MENU/ FOLDER button. When the LCD shows the message alarm ON/ OFF display, select OFF by pressing the ( ) or ( ) button. . Alarm playback 1 At the specified alarm time, the recorder will beep in short tones. 15 2 Press any button while the beep tones are being emitted to play back the message set for that time. Press the STOP button to stop message alarm playback. The electronic beep tones stop automatically if no button is pressed for 5 minutes after the beeping starts. The message is not played back in this case. Schedule Alarm Playback When the Schedule Alarm Playback mode is engaged, the day’s schedule messages can be listened to at a selected time every day. 1 First press and hold the MENU/ FOLDER button for more than 1 second. Then press the ( ) button four times to select the [S] [ALARM] setting in the Options mode. Then, press the MENU/ FOLDER button again to enter the [S] [ALARM] screen. 2 Pressing the ( ) or ( ) button alternates ON and OFF. Select [ON] by pressing either button. 3 Each time you press the MENU/ FOLDER button, the “hour” or “minute” figures blink. Set the “hour” and “minute” you want to activate the alarm by pressing the ( ) or ( ) button. To complete the folder schedule alarm setting, press the STOP button. 4 At the set alarm time each day, the recorder beeps. Press any button to playback all of the messages recorded for the current date. Press the STOP button to stop playback. Message alarm playback occurs every day unless it is set to [OFF]. 21 16 Recording with VCVA (Variable Control Voice Actuator) (VCVA REC) 1 3 4 1 First press and hold the MENU/ FOLDER button for more than 1 second. Then after pressing the ( ) button twice to select the [VCVA] setting in the Options mode, press the MENU/FOLDER button again to enter the VCVA screen. 2 Pressing the ( ) or ( ) button alternates the VCVA setting ON and OFF. Select [ON] by pressing either button, then press the STOP button to complete the setting. 3 Press the REC button. 4 When the recorder detects a voice input, it automatically starts recording and the red LED indicator lights. When the voice input stops, the recorder automatically stops recording within 1 second and enters Standby mode. During the Standby mode, the LCD shows [VCVA] and the red LED indicator blinks. 17 Hold (HOLD) 1 When the HOLD switch is set to [HOLD], the recorder is locked and all buttons are disabled. This helps to prevent accidental pressing of buttons that can activate undesired operations. It is recommended when carrying the recorder in a bag or your pocket. To conserve battery power, the LCD display disappears when the recorder is set to the Hold status in the Stop mode. Checking Remaining Recording Time (Remaining Memory Capacity) 1 1 Pres...
Otros modelos de este manual:Dictado - DIGITAL VOICE RECORDER VN-180 (532.31 kb)