Votos - 4, Puntuación media: 3.5 ( )

Fabricar: Philips Tamaño del archivo: 1.15 mb Nombre del archivo: Idioma del manual:

2 Place the batteries in the correct polarity as indicated and close the cover. 1 2 D Note • Remove the batteries if you will not be using the Voice Tracer for an extended period. Leaking batteries may damage the Voice Tracer. • If the Voice Tracer malfunctions, remove the batteries and re-insert them. • Stop the recorder before replacing the batteries. Removing the batteries while the recorder is in use may corrupt the file. • When the batteries are nearly empty, the battery indicator blinks. • If it takes longer than 2 minutes to replace the battery, you may have to reset the time. 4.2 Power on/off 1 To power on, press the f button 1 until the display shows HELLO A . 2 To power off, press the f button while the recorder is stopped until the display shows BYE. 1 A User manual 4.3 Hold function When the HOLD switch is in the Hold position, all buttons on the device are inactive. On Hold will be shown briefly on the display, and the display will turn off. Unlock the Voice Tracer by moving the HOLD switch to the Off position. 4.4 Set date and time When the batteries are installed for the first time, you will be prompted to set the date and time. 1‘CLOCK’ will be shown on the display. Press the f button year indicator A flashes. 2 Press the h or b button 1 . The 1 2 to set the year. 3 Press the f button to advance to the settings for the month. 4 Repeat steps 2 and 3 to continue to set the month, day, 12/24hour system and the time in the same way. 1 2 A User manual D Notes The date and time can be changed at any time using the menu. See Customize settings on page 16 for more information. 4.5 Display information • Press the j/DEL button while the recorder is stopped to rotate the information on the display: total playback time of the current file > time > date > remaining recording time > recording time of the current file > recording date of the current file. • Press and hold f during recording to display the remaining recording time. 4.6 Use the Voice Tracer with a computer As a USB mass storage device, the Voice Tracer offers a convenient way to save, back up and move files. The Voice Tracer connects to a computer using a USB connection and does not require special software to be installed. The Voice Tracer is automatically displayed as a removable drive, allowing you to simply drag and drop files to and from the unit. D Notes • Do not disconnect the Voice Tracer while files are transferred from or to the device. Data is still being transferred while the record/play indicator light is blinking in orange. • Do not format the drive of the Voice Tracer on a computer. ENGLISH Record 5.1 Record with the built-in microphone 1 Press the INDEX / a button 1 while the recorder is stopped to select the desired folder 2A . 2 Press the g button to start recording. The record/play indicator lights red B . Point the built-in microphone toward the sound source. 3 To pause recording, press the g button 2 . The record/play indicator will blink B , and PAUSE will flash on the display C . Press the g button again to resume recording. 4 To stop recording, press the j/DEL button 3 . C B A 1 2 3 D Notes • Set the desired voice activation function and recording mode before starting recording (see Customize settings on page 16 for details). • Make a test recording to make sure that the Voice Tracer settings are correct. • Press and hold f during recording to display the remaining recording time. • Press b during recording to create a new file. • The maximum number of files in each folder is 99, for a total capacity of 396 files (99 files x 4 folders). • If the recording time exceeds the available capacity or the number of files reaches 396, recording stops and ‘FULL’ will be displayed. Delete a few recordings or move them to a computer. • Do not remove the batteries during recording. This may cause the recorder to malfunction. • If recording for a prolonged period of time, replace the batteries before beginning. • The Voice Tracer can record while powered through a USB cable without draining the battery. Connect the recorder to a computer using the USB cable and press the g button for 1 second or longer to start recording (LFH860/870/880 only). User manual 5.2 Record with an external microphone To record with an external microphone, connect the microphone to the microphone socket and follow the same procedure as for the built-in microphone. 5.3 Overlap recording (LFH 860/870/880 only) Follow these steps to make additions to a recording and overlap parts of a recording. 1 Press the INDEX / a button 12 while the recorder is stopped to select the desired folder A . 2 Press the h or b button to select the file to which the addition should be made. 3 Play or forward to the position where the addition should be made and press the f button 34 to pause playback. 4 Press the g button to start overlap recording. The record/ play indicator will blink B , and OVER will be shown on the display C . The existing recording will be overwritten. 5 Pr...

Descargar ahora

Introduzca dos números de la imagen: