Votos - 3, Puntuación media: 4
(
)
)
|
Fotos y especificaciones Sony ICD-P210 |
Otros manuales para este modelo:
Resumen del manual
• The unit was placed near an AC power source, a fluorescent lamp or a mobile phone during recording or playback. • Plug of the connected microphone was dirty when recording. Clean the plug. • Ear receiver/headphones plug is dirty. Clean the plug. Recording level is low. • Slide MIC SENS to “HIGH”. Recording is interrupted. • The advanced VOR function is activated. Set VOR to “OFF”. Recording level is unstable (when recording music, etc.). • This unit is designed to automatically adjust the recording level when recording meetings, etc., and is not suitable for music recording. “--Y--M--D” or “--:--” is displayed. • You have not set the clock. “--Y--M--D” or “--:--” is displayed on the REC DATE display. • The date and time of recording will not be displayed if you recorded the message when the clock was not set. You cannot divide a message. • You cannot divide a message in a folder which has 99 messages. • If you divide messages frequently, the unit may become unable to divide a message. • You cannot divide a message in the first or the last 1 second of a message. You cannot record messages up to the maximum recording time. • If you record messages in a mixture of HQ, SP and LP modes, the recordable time varies from the maximum HQ mode recording time to the maximum LP mode recording time. • No more recording can be made when 99 messages each have been recorded in a folder. • Due to the limitation of the IC recording system, this unit records in the minimum recording unit. If the length of each message cannot be divided by the minimum recording unit, the remaining recording time may decrease by more than the total length of the messages. The remaining time displayed in the display window is shorter than that displayed in the supplied “Digital Voice Editor“ software. • The unit requires a certain amount of memory for system operation. That amount is subtracted from the remaining time, which is the reason for the difference. The unit does not operate correctly. • Take out the battery and insert it again. Please note that recorded messages may be erased during service or repair work. 2 Counter display (or the selected display mode) xSTOP zXREC/PAUSE Current message number Counter display* Tip This unit does not have a power on/off switch. The display is shown at all times. Playing back a message repeatedly — Repeat Play During playback, press NxPLAY/STOP for more than one second. “ “ will be displayed and the selected message will be played back repeatedly. To resume normal playback, press NxPLAY/STOP again. To stop playback, press xSTOP. Playing back all messages in a folder continuously — Continuous Play You can select the continuous play mode with the CONT in the menu. When you set CONT to ON, you can play back all messages in a folder continuously. Searching forward/ backward during playback (Cue/Review) To search forward, keep >+ pressed during playback and release the button at the point you wish to resume playback. To search backward, keep – . pressed during playback and release the button at the point you wish to resume playback. If you keep >+ or – .pressed, the unit starts to search at higher speed. During cue/review, the counter will be displayed, regardless of the display mode setting. 1 Tip When fast playback is done to the end of the last message, “END” flashes 5 times. (You cannot hear the playback sound.) If you keep – . pressed while “END” is flashing, the messages are played back rapidly, and normal playback will start at the point you release the button. When “END” stops flashing and the OPR indicator goes off, the unit will stop at the beginning of the last message. If the last message is long and you wish to start playback at a later part of the message, keep >+ pressed to play back the message to the end and then press – . while “END” is flashing to go back to the desired point . (For messages other than the last one, go to the beginning of the next message and play backward to the desired point.) Locating quickly the point you wish to start playback (Easy Search) When EASY-S is set to “ON” in the menu, you can quickly locate the point you wish to start playback by pressing – . or >+ repeatedly during playback or playback pause. You can go back approx. 3 seconds by pressing –. once, or advance approx. 10 seconds by pressing >+ once. This function is useful when locating a desired point in a long recording. For details, see “Locating quickly the point you wish to start playback (Easy Search)” on the reverse side. 1 Press MENU to enter the menu mode. 1 Press – . or >+ to select the digits of the year. 1 Press – . or >+ to select the digits of the hour. 2 Press NxPLAY/STOP. The minute digits will flash. 2 Speak to the built-in microphone. OPR indicator (lights in red during recording.) Message 1 Message 2 Newly recorded message Blank space OPR indicator (lights in green during playback.) The memory is nearly full. 2 Remaining memory indicator Selected message number Number of messages in a fol...
Otros modelos de este manual:Dictado - ICD-P110 (846 kb)