Votos - 2, Puntuación media: 4
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Make sure to log on as a user name with the "Computer administrator" user account. • In Windows® 2000 Professional, make sure to log on as the user name of "Administrator. " 76GB Symptom Remedy The IC recorder or • Check that the installation of the software has been successful. "Memory Stick" cannot be Also check the connection as follows: properly connected. - When using an external USB hub, connect the IC recorder directly to the computer. - Disconnect and then connect the cable with the IC recorder. - Connect the IC recorder to another USB connector. • Your computer may be in the system standby/hibernate mode. Do not let your computer enter into the system standby/ hibernate mode while being connected to the IC recorder. The IC recorder does not • You may format the memory of the IC recorder. Use the IC operate. recorder formatting function to format the memory. Messages cannot be • No sound board is installed. played back./Playback • No speaker is built-in or connected to the computer. sound volume is to° low. • The volume of the sound is turned down. • Turn up the volume on the computer. (Refer to the instruction manual of the computer.) • The volume of WAV files can be changed and saved using the "Increase Volume" feature of the Microsoft Sound Recorder. Saved message files • You cannot play back a message whose file format the Digital cannot be played back or Voice Editor software does not support. Depending on the edited. file format, you cannot use part of editorial features of the software. 77B Troubleshooting Symptom Remedy Counter or slider moves • This happens when you play back messages that you divided, incorrectly. combined, overwrote, or added a recording. Save a message in There is noise. the hard disk first, and then add it to the IC recorder. Select the saving file format that suits the IC recorder you use. Operation is slow when • When the total number of messages increases, the operation there are many messages. becomes slower, regardless of the length of the recording time. Display does not work • It takes a longer time to copy or delete long messages. After during saving, adding, or completing operations, the display works normally. deleting of messages. It takes too long to • The time required for file conversion becomes longer as the file convert a file format. size is bigger. The software 'hangs' when • Do not disconnect the connector of the IC recorder while the the Digital Voice Editor computer is communicating with the IC recorder. Otherwise software starts up. the computer operations become unstable or the data inside the IC recorder may be damaged. • There may be conflict between the software and other driver or application. • Do not install the "Memory Stick Voice Editor" software and the Digital Voice Editor Ver. 2x software after you installed the Digital Voice Editor software. The Digital Voice Editor software may not operate properly. 78B Error Messages (IC recorder) Error message Cause/Remedy BATTERY LOW • You cannot format the memory or erase all the files in a folder because of insufficient battery power. Prepare new batteries to replace the current ones. LOW BATTERY • Batteries are exhausted. Replace the old batteries with new ones. MEMORY FULL • The remaining memory capacity of the IC recorder is insufficient. Erase some messages before recording. FILE FULL • When there are already 999 messages in the selected folder or the total number of the file stored in the IC recorder becomes maximum, you cannot divide the message. Erase some messages before dividing a message. FILE DAMAGED • You cannot play or edit messages, because the data of the selected file is damaged. FORMAT ERROR • The IC recorder cannot be turned on using the computer because there is no copy of the control file required for operation. Format the IC recorder using the formatting function in the menu. PROCESS ERROR • The IC recorder failed in memory access. Remove and then re-insert the batteries. • Save a backup copy of your data and format the IC recorder using the menu. 79" Troubleshooting Error message Cause/Remedy SET DATE&TIME • Set the clock; otherwise, you cannot set the alarm. SET ADD/OVERWRITE • "ADD/OVER" in the menu is set to "OFF." You cannot add a recording or an overwrite recording. NO FILE • The selected folder does not have any messages. You cannot add priority marks, bookmarks, set the alarm, etc., because of this. ALREADY SET • You set the alarm to play back a message at a date and time previously set on another message. Change the alarm setting. PAST DATE/TIME • You set the alarm when the time has already passed. Check it and set the appropriate date and time. NO SETTING • If you have not set the alarm, the alarm list will not be displayed. Make the alarm setting for "NEW." • If you have not set any bookmark on a message, you cannot cancel it. FILE PROTECTED • The selected message is protected and is now a "Reading only" file....
Otros modelos de este manual:Dictado - ICD-SX68 (2.36 mb)
Dictado - ICD-SX78 (2.36 mb)