Votos - 3, Puntuación media: 4.7
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
“Select Input” appears in the display window. If “Select Input” is not displayed, set it in the menu (page 80). 2 Press v or V on the control button to select “MIC IN,” and then press N/ ENT. 3 Press x STOP to exit the menu mode. 4 Press z REC/PAUSE to start recording. The built-in microphones are automatically cut off. If the input level is not strong enough, adjust the microphone sensitivity on the IC recorder. When a plug in power type microphone is connected, power is automatically supplied to the microphone from the IC recorder. z Recommended microphones You can use the Sony ECM-CS10, ECM-CZ10, ECM-DS70P, ECM-DS30P electret condenser microphone (not supplied). 36 36 GB Recording sound from a telephone or a cell phone Recording sound from a telephone or a cell phone PNotes • After you have made the connection, check the sound quality of the conversation and the recording level before you start recording. • If the beep of the telephone or a dial tone is recorded, the conversation may be recorded with lower level of sound. In this case, start recording after the conversation has started. • The VOR function may not work, depending on the kind of telephone or the line condition. • We assume no responsibility whatsoever for any inconvenience, even if you cannot record a conversation using the IC recorder. Recording from other equipment External equipment m (microphone) jack x STOP z REC/PAUSE N/ENT MENU v, V You can make music files without using the computer by recording the sound from other equipment connected to the IC recorder. z Tips • Before you start recording, we recommend you make a trial recording first. • If the input level is not strong enough, connect the headphone jack (minijack, stereo) of other equipment to the Other Recording Operations 37 37 GB m m To record using the synchronized recording function 1 Press MENU to enter the menu mode. The menu mode window will be displayed. 2 Press v or V on the control button to select “Detail Menu,” and then press N/ ENT. 3 Press v or V on the control button to select “SYNC REC,” and then press N/ ENT. 4 Press v or V on the control button to select “ON,” and then press N/ENT. 5 Press x STOP to exit the menu mode. 6 Connect other equipment to the IC recorder when the IC recorder is in the stop mode. Connect the audio output connector (stereo mini-plug) of other equipment to the m (microphone) jack of the IC recorder using an audio connecting cable. “Select Input” appears in the display window. If “Select Input” is not displayed, set it in the menu (page 80). 7 Press v or V on the control button to select “Audio IN,” and then press N/ ENT. 38 38 GB 8 8x STOP to exit the menu mode. 9 Press z REC/PAUSE to start recording. “ ” flashes and the IC recorder enters the recording pause mode. 10 Start playback on the piece of equipment connected to the IC recorder. “ ” appears on the display and synchronized recording starts. The synchronized recording pauses when no sound is detected for more than 2 seconds, and “ ” flashes. The IC recorder starts recording again as a new message when sound is detected. PNotes • During synchronized recording, you cannot divide a message (page 34) and you cannot pause recording (page 20). • Depending on the piece of equipment connected to the IC recorder, the synchronized recording function may not operate properly due to a difference in the audio input level. To record without using the synchronized recording function 1 Press MENU to enter the menu mode. The menu mode window will be displayed. 2 Press v or V on the control button to select “Detail Menu,” and then press N/ ENT. 3 Press v or V on the control button to select “SYNC REC,” and then press N/ ENT. Other Recording Operations 39 39 GB 4 4 5 Press x STOP to exit the menu mode. 6 Connect other equipment to the IC recorder when the IC recorder is in the stop mode. Connect the audio output connector (stereo mini-plug) of other equipment to the m (microphone) jack of the IC recorder using an audio connecting cable. “Select Input” appears in the display window. If “Select Input” is not displayed, set it in the menu (page 80). 7 Press v or V on the control button to select “Audio IN,” and then press N/ ENT. 8 Press x STOP to exit the menu mode. 9 Press z REC/PAUSE to start recording. The built-in microphones are automatically cut off and the sound from the connected equipment is recorded. 10 Start playback on the piece of equipment connected to the IC recorder. PNote When recording from other equipment, the microphone sensitivity cannot be adjusted. 40 40 GB Other Playback Operations Other Playback Operations Convenient playback methods Listening with better sound quality • To listen with the headphones: Connect the supplied headphones to the i (headphone) jack. The built-in speaker will be automatically disconnected. • To listen from an external speaker: Connect an active or passive speaker (not supplied) to the i (headphone) jack. Quickly locating the point you wish to start pl...
Otros modelos de este manual:Dictado - ICD-UX200 (5.75 mb)
Dictado - ICD-UX300 (5.75 mb)
Dictado - ICD-UX300F (5.75 mb)