Iniciar sesión:
Votos - 3, Puntuación media: 3.7 ( )

Manual de usuario Sony, modelo ICD-BX800

Fabricar: Sony
Tamaño del archivo: 1.57 mb
Nombre del archivo: 4167956111.pdf
Idioma del manual:en
Fotos y especificaciones  Sony  ICD-BX800
Enlace gratuito para este manual disponible en la parte inferior de la página



Otros manuales para este modelo:

Resumen del manual


the finishing point B. General ECM-TL1 MOVE The selected message will be moved to the selected folder ( , , , message, and will be counted as a part of .Notes Audio connecting cable* RK-G136, RK-G139 “ ” and “A-B” are displayed and Speaker (excluding Europe) , or ). the message. 6 When the message to be added is played . You cannot specify the finishing point B Before attempting to move a message, select the message to be moved, and the specified section is played back Approx. 28 mm (1 1/8 in.) dia. Rechargeable battery NH-AAA-B2K before the starting point A has been set. Menu settings then go to the menu window. During playback of Message 3 back, press .REC/PAUSE.repeatedly. Battery charger BCG-34HS2KA (excluding Message 3 Message 4 . You cannot set point A and point B at Input/Output Latin America), BCG-34HLD22K (Latin ALL ERASE All messages in the selected folder will be erased. and “ADD” will flash and the IC the very beginning (0.5 seconds from the . Microphone jack (minijack, stereo) America only) Select a folder from which all messages are to be erased, and then go to the recorder stops in the recording pause To resume normal playback: beginning) or at the very end (0.5 seconds . input for plug in power, minimum Menu items Settings (*: Initial setting) menu window and press .PLAY/STOP•ENTER while “ALL ERASE” is mode. Press .PLAY/STOP•ENTER. prior to the end) of the message. input level 0.4 mV, 3 kilohms or lower * Audio connecting cable MODE Sets the recording mode.flashing. impedance microphone SHQ*: After adding a recording Super high-quality monaural recording mode (44.1 kHz/192 kbps) Message 3 Message 4 7 While “ADD” is flashing, press .REC/ To stop A-B Repeat playback: . Headphone jack (minijack, stereo) To the IC To the other . output for 16 ohms - 300 ohms recorder equipment You can record with monaural super high-quality sound. PAUSE again. Press .(stop). headphones HQ: Added recording RK-G139 Stereo Mini-plug High-quality monaural recording mode (44.1 kHz/128 kbps)Other Recording Operations mini-plug (monaural) The operation indicator will light in red, Playback speed control (DPC) You can record with monaural high-quality sound. and the recording will be added at the +100% to –50% RK-G136 Stereo Stereo SP: 1 Press and hold FOLDER/MENU to enter end of the current message. mini-plug mini-plug Standard play monaural recording mode (44.1 kHz/48 kbps) Power output Monitoring the Recording the menu mode. Recording with Other Equipment You can record with standard quality sound.300 mW LP: The menu mode window will be 8 Press .(stop) to stop recording. Your dealer may not handle some of the Power requirements Long play monaural recording mode (11.025 kHz/8 kbps)If you connect commercially available recording. You can adjust the monitoring You can record the sound of the IC recorder above listed optional accessories. Please ask displayed. .Notes 2 Press .PLAY/STOP•ENTER to start You can record for a longer time with monaural sound. headphones to the . (headphone) jack volume by pressing VOL +/–, but the with other equipment. Two LR03 (size AAA) alkaline batteries the dealer for detailed information. . You cannot add a recording if the remaining playback and at the same time set the (supplied): 3.0 V DC SENS Sets the microphone sensitivity.before you start, you can monitor the recording level is fixed. 2 Press –. or .+ to select “REC-OP,” Before you start recording, we recommend memory is insufficient. connected equipment to the recording Two NH-AAA rechargeable batteries (not *: you to make trial recording first. and then press .PLAY/STOP•ENTER. Design and specifications are subject to To record a sound far away from the IC recorder or a low sound, such as . The added portion of a message will be mode. supplied): 2.4 V DC a recording made in a spacious room. recorded in the same recording mode. change without notice. 1 Connect the .(headphone) jack of the A message from the IC recorder will be Operating temperature : 3 Press –. or .+ to select “ON,” and . If 10 minutes have passed after step 6, you 5.C - 35.C (41.F - 95.F) IC recorder to the audio input connector recorded on the equipment connected. To record dictation with a microphone in front of your mouth, a sound Selecting the Recording Mode then press .PLAY/STOP•ENTER. must start the procedure again from the near the IC recorder, or a loud sound. beginning. (stereo minijack) of other equipment using an audio connecting cable (not 3 Press .(stop) on the IC recorder and Maximum recording time*2*3 VOR Sets the VOR (Voice Operated Recording) function. You can select the recording mode in the 4 Press .(stop) to exit the menu mode. ON: supplied). the connected equipment at the same The maximum recording time of all the folders is as follows. menu when the IC recorder is in the stop Recording starts when the IC recorder detects sound and pauses when time to stop recording. mode. For details about the audio connecting SHQ mode HQ mode SP mode LP mode ...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría