Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
This appliance should have its own separate grounded circuit. Do not use an extension cord. The power cord is equipped with a three-prong (grounding) plug for your protection against possible shock hazards. To maintain this protection: • Do not modify the plug by removing the round grounding prong. • Do not use a two-prong adapter. Where a two- prong wall receptacle is encountered, contact a qualified electrician and have it replaced with a three-prong receptacle in accordance with all local codes and ordinances. • Do not use a power cord that is frayed or damaged. UNPACKING Safety Instructions and Warnings To avoid risk of personal injury or property damage, have two people unpack and move this appliance into place. Protect the finished floor surface before you uncrate the unit. Avoid placing the appliance in direct sunlight or near the stove, range top, radiators and similar heat sources. The floor under the appliance should be flat and level. Keep the appliance out of the weather. The ventilation grille CAN-NOT be obstructed. Always ensure there is good ventilation in front of the appliance. As soon as you uncrate the unit: • Examine the unit and packaging for shipping damage. Contact the carrier immediately if you suspect there is any damage. • Note the type (model number), index, appliance / serial number, date of purchase and where purchased on the spaces provided in the back of this manual. Disposal of Carton The packaging is designed to protect the appliance and individual components during moving and is made of recyclable materials. • Corrugated board/board • Molded polystyrene (foamed, CFC-free polystyrene) • Polythene bags and sheets • Polypropylene straps Keep packaging materials away from children. Polythene sheets and bags can cause suffocation! • Please take the packaging material to your local recycling facility. UNPACKING Safety Regulations The appliance is designed to cool and store wine and beverages. It is designed as a household appliance. The appliance is set to operate within specific ambient temperature limits according to its climate rating. These temperature limits should not be exceeded. The correct climate rating for your appliance is indicated on the model plate. This is explained as follows: Climate Rating Set for Ambient Temperatures of SN 50°F to 90°F (10°C to 32°C) N 61°F to 90°F (16°C to 32°C) ST 65°F to 100°F (18°C to 38°C) - The refrigerant circuit has been tested for leaks. - The appliance complies with current safety regulations UL250 and CSA C22.2 #63. We recommend cleaning the appliance before turning it ON for the first time. See Cleaning. Turn ON the appliance several hours before loading it. Do not allow children to play with the appliance. Children must not climb, sit or stand on the racks or door. Failure to follow these instructions may result in death or serious injury. The Under-Counter Wine Cooler - Figure 1 Wines only develop their full flavor and aroma when they are at the right temperature for drinking. In your wine cooler, wines can be brought slowly and evenly to the ideal drinking temperature. Red wines and white wines can be stored at the same time at the optimal drinking temperature in two separately adjustable temperature zones. Figure 1 INSTALLATION Installation and Fitting - Figure 3 Figure 3 1. Connect the appliance to the dedicated outlet. 2. Slide the appliance into the recess. 3. Secure the appliance in the recess using 4 x 14 mm screws. The screws can be installed into the counter or into the cabinet or frame on the sides of the wine cooler, or in any combination. Four screws must be used. The appliance is adapted with a door opening limiter. The maximum opening angle is 105°. The wine cooler must be attached to the cabinet or counter before it is used. Fitting Dimensions - Figure 2 Figure 2 * Overall height can be increased by 2 inch (50 mm) by adjusting the feet. Adjust to recess height using the four adjustable feet on the underside of the appliance. Put the electrical outlet in a location where it does not interfere when the wine cooler is placed into its recess. IMPORTANT The fitting dimensions are actual, allow for additional clearance for sliding the wine cooler into its recess based on how you chose the final installation to look. Make sure your installation does not block the ventilation grille. (Figure 2a). Figure 2a INSTALLATION Reversing the Door Hinges - Figure 4 To prevent possible injury from an electrical shock, be sure to disconnect the power cord or turn OFF the circuit breaker before performing the following steps. To avoid injury from sharp edges, wear protective gloves before performing the following steps. 1. Unscrew hinge pin. 2. Lift off the door. 3. Unscrew the ventilation grille. 4. Pull out sleeve and reassemble. 5. Unscrew upper hinge plate, turn it 180° and screw on the opposite side. 6. Unscrew lower hinge plate. 7. Remove screws. 8. Transfer both pins of the hinge plate to the opposite side. 9. Insert screws agai...