Votos - 5, Puntuación media: 4.2
(
)
)
|
Resumen del manual
To ensure continued protection observe the following: Failure to disconnect the power could result in serious injury, death or equipment damage. SHIPPING AND STORAGE MOUNTING IN OR ON A COUNTER ICE DISPENSER SAFETY PRECAUTIONS Failure to disconnect the power could result in serious injury, death or equipment damage. This ice dispenser has been specifically designed to provide protection against personal injury and eliminates contamination of ice. To ensure continued protection and sanitation, observe the following: DESCRIPTION The D45 or D90 ice dispensers solve your ice and beverage service needs in a sanitary, space saving, economical way. Designed to be manually filled with ice from any remote ice-making source, these dispensers will dispense cubes (up to 1-1/4” inch size), cubelets and hard-chipped or cracked ice. INSTALLATION INSTRUCTIONS CLEANING INSTRUCTIONS DISPENSER OPERATING INSTRUCTIONS Fill the hopper with ice and replace the lid. Pushing the dispenser lever will cause ice to flow from the ice chute. Ice flow will continue until the lever is released. If ice does not dispense, see the TROUBLESHOOTING GUIDE to find the cause. MAINTENANCE The following dispenser maintenance should be performed at the intervals indicated: CLEANING DAILY (OR AS REQUIRED) Remove foreign material from the vending area sink to prevent drain blockage. WEEKLY (OR AS REQUIRED) Clean the vending area. Check for proper water drainage from the vending area sink. MONTHLY Clean and sanitize the hopper interior. (See CLEANING INSTRUCTIONS.) If the dispenser fails to dispense ice when operated, check that the hopper has ice in it and that power is being supplied to the unit. If the problem persists, check the following: After checking the above, refer to the TROUBLESHOOTING GUIDE for possible problem causes and corrective action. TROUBLESHOOTING GUIDE Should your unit fail to operate properly, check that there is power to the unit and that the hopper contains ice. If the unit still does not dispense, check the following chart under the appropriate symptoms to aid in locating the defect. BLOWN FUSE OR CIRCUITBREAKER. GATE DOES NOT OPEN. AGITATOR DOES NOT TURN. GATE DOES NOT OPEN OR IS SLUGGISH. AGITATOR TURNS. GATE OPENS. AGITATOR DOES NOT TURN. ICE DISPENSES CONTINUOUSLY. SLUSHY ICE. WATER IN HOPPER. MOUNTING TEMPLATES WIRING DIAGRAM SOLENOID ASSEMBLY-EXPLODED VIEW AND PARTS LIST # 31551 solenoid Supplied with items 20 & 21. CUP ACTIVATEDPUSH LEVER DISPENSING LEVERS AND SWITCHES PARTS LIST ...
Otros modelos de este manual:Dispensers - D90 (550.86 kb)