Iniciar sesión:
Votos - 3, Puntuación media: 4.3 ( )

Manual de usuario Sony, modelo FOUND NOT KDL-40V4150

Fabricar: Sony
Tamaño del archivo: 3.92 mb
Nombre del archivo:
Idioma del manual:
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


~ • While Picture Off is set, pressing VOL +/– or MUTING buttons will not disable this function. Press other buttons to disable it. Light Sensor Enables the automatic picture (screen) brightness control. The Light Sensor measures the room brightness which allows the TV to automatically adjust the backlight brightness based on the picture settings and the ambient room light conditions. ~ • Be sure not to put anything around the sensor, as its function may be affected (see page 18). • In low light the range of the backlight control is reduced when the Light Sensor is set to On. PC Power Select On to have the TV automatically enter standby mode when there is no signal input Management for more than 30 seconds. The STANDBY LED on the front panel illuminates with the On option. Select Off to disable this feature. ~ • Press POWER to exit from standby mode. • PC Power Management is not VESA-compliant. Logo Illumination Select On to illuminate the SONY logo on the front panel or select Off to disable this Logo Illumination is function. available only for KDL-W series. Initial Setup If you missed the Initial Setup when you first connected the TV or if you want to scan all receivable channels, select Initial Setup. Follow the instructions on the screen. Some settings such as Picture Adjustments, Sound Adjustments, and Parental Lock will not be affected by this Initial Setup. If you wish to return your TV to factory settings, please see the Troubleshooting section on page 45. ~ • Favorite channel list will be cleared each time you run the Initial Setup. Other Information Other Information Troubleshooting If you have questions, service needs, or require technical assistance related to the use of your 1-800-222-SONY(7669) for US Support Sony TV, please visit our website or call one of 1-877-899-SONY(7669) for Canadian Support the following numbers: Condition Explanation/Solution No picture No picture • Check the Power Saving settings (see page 42). Cannot receive any channels • Make sure the power cord is connected securely. • Turn on the power of the TV. • Check cable/antenna connections. • Make sure the Signal Type setting is correct for your TV signal source. TV is locked to one channel • Perform Auto Program to add receivable channels that are not present in the TV’s memory (see pages 16 and 37). Cannot receive or select • Perform Auto Program to add receivable channels that are not present in the channels TV’s memory (see pages 16 and 37). • To receive or select cable channels, make sure that Signal Type in the Channel settings is set to Cable (see page 37). To receive or select UHF channels over an antenna, make sure Signal Type is set to Antenna. The TV turns off •Check if Sleep Timer is activated, or confirm the Duration setting of Timer automatically (see page 31). •Check PC Power Management in General Setup settings (see page 42). No picture from some video • Check the connection b...

Otros modelos de este manual:
Dispensers - FOUND NOT KDL-32XBR6 (3.92 mb)
Dispensers - FOUND NOT KDL-37XBR6 (3.92 mb)
Dispensers - FOUND NOT KDL-40V4100 (3.92 mb)
Dispensers - FOUND NOT KDL-40W4100 (3.92 mb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría