Votos - 3, Puntuación media: 4.7
(
)
)
|
Resumen del manual
2 IMPORTANT SAFETY INSTRUCTIONS……………………………………. 3 INSTALLATION INSTRUCTIONS BEFORE USING YOUR APPLIANCE…………………………..…… 3 FREE STANDING INSTALLATION….………………….…………… 3 BUILT-IN INSTALLATION………..…………………………………… 4 ELECTRICAL CONNECTION ……………….………………………. 4 APPLIANCE FEATURE…………………………………….…………………... 5 OPERATING YOUR APPLIANCE TEMPERATURE CONTROL AND DISPLAY ………………………… 6 INDICATOR LIGHT ……………..……………………………………… 6 STAND BY …………………..…………………………………………… 6 LOCK AND UNLOCK …………………………………………………… 6 TEMPERATURE SETTING ……………………………………………. 6 – 7 INTERIOR LIGHT ………………………………………………………. 7 AUTOMATIC DEFROST ………………………………………………………. 7 CARE AND MAINTENANCE CLEANING YOUR APPLIANCE……………………………………… 7 VACATION TIME………………………………………………………. 7 MOVING YOUR APPLIANCE………………………………………… 7 ENERGY SAVING TIPS……………………….………..……………. 7 TROUBLESHOOTING GUIDE………………………………………………. 8 APPLIANCE WARRANTY…………………………….……………………… 9 NAMES OF THE PARTS MODEL NO.: MCWBC77DZC 1) Interior Light 2) DC Electric Fan 3) Inner rear 4) Zone Partition 5) Control / Display Panel 6) Wire Shelf / Glass Shelf *(Shelves are available for either wine or beverage combination storage use) 7) Door Handle 8) Partition Gasket 9) Tempered Glass Door SPECIFICATIONS – Model # MCWBC77DZC Product Description Built-In Wine & Beverage Cooler With Dual Temperature Zones Model No. MCWBC77DZC Unit Dimensions ( inches ) Width Height Depth 23.4” 34.4” 24.4” Net Weight ( lbs) 114lbs IMPORTANT SAFETY INSTRUCTIONS ..WARNING.. To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions: Read all instructions before using the wine or beverage cooler. DANGER or WARNING: Risk of child entrapment. To avoid the possibility of child entrapment, please take the following precautions before throwing out the appliance. - Remove all doors from the unit. - Leave the shelves in place so that children may not easily climb inside. Never allow children to operate, play with, or crawl inside the appliance. Refrigerants: All refrigeration products contain refrigerants, which under the guidelines of federal law must be removed before disposal of product. It is the consumer’s responsibility to comply with federal and local regulations when disposing of this product. Never clean appliance parts with flammable fluids. The fumes can create a fire hazard or explosion. Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or an explosion. -Save these instructions- INSTALLATION INSTRUCTIONS Before Using Your Appliance • Remove the exterior and interior packing. • Before connecting the appliance to the power source, let it stand upright for approximately 4 hours. This will reduce the possibility of a malfunction in the cooling system from improper handling during transportation. • Clean the interior surface with lukewarm water using a soft cloth. (Cleaning instruction on page 7) Free-Standing Installation • This appliance is designed to be installed built-in or free standing. • Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Ambient temperature below 68°F (20°C) or above 90°F (32°C) will hinder the performance of this appliance. This unit is not designed for use in a garage or any other outside installation. • Avoid locating the appliance in moist areas. • Plug the appliance into dedicated, properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized service center. This unit is not designed to be installed in an RV or used with an inverter. • After plugging the appliance into a wall outlet, turn the unit on and allow the unit to cool down for 3 ~ 4 hours before placing wine bottles or beverage cans in the appliance. Built-In Installation The cutout dimension illustrated in figure (A) allows for door swing and access to the pull-out shelves when installed as a built-in appliance. If installing between frameless cabinets, a .” wide filler strip or side panel may be needed on hinge side. The filler strip will act as a spacer between the appliance case and adjacent cabinet door swing. The width of the opening must include the filter panels. Note: The door should protrude at least 1” beyond the surrounding cabinets. Electrical Connection This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock. Do not, under any circumstances, cut or remove the third ground prong from the power cord supplied. This appliance requires a standard 115 Volt A.C. /60Hz electrical outlet with three-prong ground. Thi...