Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
Top and corner supports shall be 16-gauge stainless steel, welded, ground and polished into one integral unit. Interior liner shall be water-tight and constructed of 22-gauge stainless steel with a 1.00” (2.54cm) I.P.S. drain. Unit shall be insulated with high-density, foamed-in-place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane insulation with a non-conductive top breaker strip. Refrigerated compartment is equipped with drain plumbed to a drain valve located at the bottom of the counter. Each opening shall have a stainless steel sliding lid recessed handles. Three stainless steel louvers shall be installed in the end and sides of the cabinet to allow proper air flow to the condensing unit. Each self-leveling mechanism shall be field adjustable by adding or removing stainless steel extension springs in the elevator housing inside the unit. The elevators shall be connected by removable platform carriers constructed of 18gauge stainless steel. Refrigeration system shall use HFC-134a refrigerant. Refrigerant flow shall be controlled by an expansion valve. Cabinet shall maintain 36°F to 40°F (2°C to 4°C) temperature with lids closed for storage. Refrigeration system shall be controlled by a pressure control, located near the condensing unit. Electrical connections shall be 115 volt, 60 cycle, single phase. Unit shall have a 9’ (2.7m) long electrical cord and NEMA 5-15P plug. Exterior has an ON/OFF switch. Legs: Unit shall be mounted on 6.00” (15.2cm) high adjustable stainless steel legs. NOTE: This equipment is intended for storage and /or display of pre-packaged or bottled products only. 980 S. Isabella Rd. Phone: 800-733-8948 or 989-773-7981 Mt. Pleasant, Michigan 48858 Fax: 800-669-0619 N6/ N10/ N14 Free- Standing Self- Contained Milk Or Beverage Dispensers N6/ N10/ N14 Free- Standing Self- Contained Milk Or Beverage Dispensers Specifications Model Unit Height Crate Capacity H.P. Amps BTU Load BTU Capacity Ship Weight N6-1313-34 34” (86.4cm) 6 1/4 5.0 250 1170 382 lbs/ 173 kg N6-1313-36 36” (91.4cm) 6 1/4 5.0 250 1170 402 lbs/ 182 kg N10-1313-34 34” (86.4cm) 10 1/4 5.0 350 1320 545 lbs/ 247 kg N10-1313-36 36” (91.4cm) 10 1/4 5.0 350 1320 565 lbs/ 256 kg N14-1313-34 34” (86.4cm) 14 1/4 5.0 460 1420 650 lbs/ 295 kg N14-1313-36 36” (91.4cm) 14 1/4 5.0 460 1420 670 lbs/ 304 kg 54.50" 138.4cm32.00" 81.3cm16.00" 40.6cmD=DRAIN19.75" 50.2cmD73.00" 185.4cm32.00" 81.3cm16.00" 40.6cmD=DRAIN29.12" 74.0cmD36.00" 91.4cm32.00" 81.3cm16.00" 40.6cmD=DRAIN10.50" 26.7cmDPLAN VIEW MODEL N6-1331-34 & N6-1331-36 PLAN VIEW MODEL N10-1331-34 & N10-1331-36 PLAN VIEW MODEL N14-1331-34 & N14-1331-36 ELEVATION VIEW MODEL N6-1331-34 & N6-1331-36 ELEVATION VIEW MODEL N10-1331-34 & N10-1331-36 ELEVATION VIEW MODEL N14-1331-34 & N14-1331-36 25.5” 64.77cm34.75” 88.26cm43.88” 111.45cmEND VIEW ALL MODELS 34.00” 86.4cmor36.00” 91.4cm6.12” 15.54cmDrain valve with garden hose h...
Otros modelos de este manual:Dispensers - Shelleymatic N10 (99.07 kb)
Dispensers - Shelleymatic N6 (99.07 kb)