Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
warrants this product to be free from defects in materials and workmanship for a period of one year from the date of purchase or MTI will repair, or at its option, replace the defective product. To obtain warranty service, call MTI for a return material authorization (RMA) number and return the product prepaid to Multiplex Technology, Inc., 3001 Enterprise Street, Brea, CA 92821, Attention: Customer Service. Please put the RMA number on the outside of the carton. Any implied warranty arising from the sale of the product including implied warranties of merchantability and fitness for purpose are limited to the warranty stated above. MTI shall not be responsible for losses or damages or expenses, whether direct, consequential or incidental arising from the use of or the inability to use this product. Some states do not allow limitations on how long the implied warranty lasts or the exclusion or limitation or incidental or consequential damages, so the above limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights which may vary from state to state. Point to Point Video Distribution System Model SVC-10 This device complies with the FCC's Part 15 Rules for TV interface devices. Any change or modification to this device without the permission of Multiplex Technology, Inc. may void the user's authority to operate this equipment. 3001 Enterprise Street, Brea, CA 92821-6213, U.S.A. 714-996-4100 * 800-999-5225 * FAX 714-996-4900 * 600-227 Rev. B Multiplex Technology, Inc., Brea, CA 92821 LEFT 300mA 15VDC POWER IR REPEATERS 800 1000 400 600 0 200 CAT-5 VIDEOOUT DIGITAL OUT AUDIO OUT VIDEOIN DIGITAL IN AUDIO IN RIGHT COAX OPTICAL LENGTH ADJUST (in feet) VIDEO S-VIDEO PCM/AC3/DTS power s-video video digital IR SVC-10 The SVC-10 is a complete audio/video/IR over CAT-5 tranmission system. Each SVC-10 includes a rack-mountable transmitter and a small receiver unit. The SVC-10 can transmit either composite video or S-video and either Pro-logic encoded analog stereo or Digital audio. The SVC-10 transmitter can be adjusted to compensate for CAT-5 cable losses up to 1000 feet. In addition, an IR target can be used with the receiver to control the remote source. CONTROLS AND CONNECTIONS Transmitter Front Transmitter Back Receiver Front Receiver Back Shows either composite or s-video source LED lit when transmitting digital audio LED flashes during IR data transmission Power LED is always lit when unit powered 2 Power supply input Left analog audio input Left analog audio output (loop through) S-video output Right analog audio output (loop through) Composite video output (loop through) Digital audio coax output (loop-through) CAT-5 output IR emitter ports (2) Right analog audio input Cable length adjust Digital audio coax input S-video input Digital optical audio input Composite video input POWER LEFT AUDIO RIGHT DIGITAL AUDIO COAX VIDEO S-VIDEO CAT-5 IR INPUT power IR SVC-10R Power supply input Left analog audio output Right analog audio output Digital audio coax output Composite video output S-video output CAT-5 input IR target input Flashes during IR transmission Power LED lit while unit powered OVERVIEW 7 FREQUENTLY ASKED QUESTIONS Q: Can I transmit composite video from one source and s-video from another source at the same time? A: No, the SVC-10 can only handle either composite or s-video - not both. Q: Can I connect a CD player’s left&right analog outputs and the digital coax from a DVD to the SVC-10? A: Yes, but only one device can be used at a time. If you are transmitting digital audio, make sure your CD player is off. Likewise, if you are using the CD player, make sure the DVD player is off. Q: What happens if I use both the coax digital and optical connector at the same time? A: The coax digital always overrides the optical signal. When the coax digital connector is plugged into the unit, the optical signal is ignored, even if there is no signal on the coax cable. Q: Can the SVC-10 transmit farther than 1000 feet? A: Yes, but the system only compensates for up to 1000 feet. The SVC-10 is optimized for lengths from 0 to 1000 feet. Operating beyond this is possible but not recommended. Q: Can I expand the SVC-10 using an expansion panel to connect several receivers to a single transmitter? A: No, the SVC-10 system is designed to work point-to-point. It is not designed to be expanded at this time. Q: What digital formats is the SVC-10 compatible with? A: All commonly available formats such as PCM, Dolby Digital® (AC-3), Dolby Digital Surround EX , DTS and DTSES . Q: How do I set the length adjustment if I don’t know how long my CAT-5 run is? A: You can adjust the control until the picture looks normal for contrast and brightness. ® ® ® 6 Attach the IR emitter directly over the IR sensor. Sample System Diagram 3: Transmitting S-video and DTS from a DVD 600 feet with IR LEFT 300mA 15VDC POWER IR REPEATERS 800 1000 400 600 0 200 CAT-5 VI...