Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
• Twist the coaxial cable’s shield braid firmly and connect it to the GND terminal. 20 mm (25/32") Shield braid Core wire 10 mm (3/8") FM outdoor antenna 75 . coaxial cable White Rear panel OPTICAL1 2 S VIDEO VIDEO L DIGITOPTICAL2 COAXIAL2 XM LOOPEXTGNDLOOPGNDLOOPGND AM ANTFM ANT LOOP ANT GND (BD/DYER) INOUT OUT OUTIN IN IN INSUBWOOFER SURROUND FRONT IN IN IN VD RECORDER D D RECORDER VD RECORDER TV MONITORTV MONITOR TV/STB CENTER BD/ DVD PLAYER BD/ DVD PLAYER (DVD RECORDER) IN 1 1 FM ANT GND 1 2 2 Fix the other end of the antenna where reception is best. (included) Keep the antenna cord away from DVD recorders, DVD players, and other cords. Black Red FM outdoor antenna (not included) • Disconnect the FM indoor antenna. • The antenna should be installed by a competent technician. • Twist the coaxial cable’s shield braid firmly and connect it to the GND terminal. 20 mm (25/32") Shield braid Core wire 10 mm (3/8") FM outdoor antenna 75 . coaxial cable White Rear panel • Turn off all equipment before making any connections. • Peripheral equipment sold separately unless otherwise indicated. • To connect equipment, refer to the appropriate operating instructions. Connecting antennas FM indoor antenna Adhesive tape (included) AM loop antenna Preparations Connecting XM Connect & Play antenna or XM Mini-Tuner and Home Dock You can enjoy XM Satellite Radio on this unit by connecting the XM Connect & Play antenna, or XM Mini-Tuner and Home Dock (each sold separately). • XM monthly service subscription is required to receive XM Satellite Radio. XM Connect & Play antenna, or XM Mini-Tuner and Home Dock (each sold separately) Refer to page 48 for optimizing the reception and information on how to subscribe to XM Satellite Radio. (TV/STB) OPTICAL1 DIGITAL IN LOOPEXTGNDLOOPGNDLOOPGND AM ANTFM ANT LOOP ANT GND (DVD RECORDER) (DVD PLAYER) (CD) OPTICAL2 COAXIAL1 COAXIAL2 OUT (DVD RECORDER) IN S VIDEO OUT TV MONITOR IN DVD PLAYER IN DVD RECORDER IN TV/STB OUT VIDEO TV MONITOR DVD PLAYER IN IN VD RECORDER IN VCR IN TV/STB L R IN CD CENTER SUBWOOFER SURROUND FRONT DVD/DVD 6CH IN AUDIO IN DVD RECORDER IN VCR IN TV/STB OUT SUBWOOFER XM DIGITAL TRANSCEIVER Rear panel XM Connect & Play antenna or XM Mini-Tuner and Home Dock Connections 25 RQT8979 Auto speaker setup using the setup microphone • Using the supplied setup microphone, you can measure such items as distance from the seating area and polarity and make adjustment for connected speakers. • For ELS Surround playback, perform the auto speaker setup and light up the “AUTO SPEAKER SETUP” indicator. • The unit considers seven speakers and one subwoofer are connected to the unit (keeps factory settings) unless you perform these steps. Keep quiet during the auto speaker setup. Conversational voice, air-conditioning noise and faint sounds made by wind may cause an error or produce an incorrect setting. Speakers output loud test signals during the auto speaker setup. Make sure to keep little children out of the room. • Mute the TV volume before starting the auto speaker setup. • Make sure that the subwoofer is turned “ON”. Set the subwoofer volume to the normal listening level. “ ” SPEAKERS W-MENU/-SETUP ENTER SURROUND SPEAKERS TUNE AUXSETUP MIC INPUT SELECTOR VOLUME BI-AMP SURROUNDAUTO DETECTOR -MULTI ROOM ADVANCED DUAL AMP POWER WIRELESS READY AUTO SPEAKER SETUP HDMI MULTI ROOM RETURN SURROUND SPEAKERSENTER-MENU/-SETUP AUTO DETECTOR -MULTI ROOM RETURN TUNE SETUP MIC WAUX S VIDEO VIDEO L-AUDIO-R SPEAKERS A POWER “AUTO SPEAKER SETUP” To cancel the setup halfway Press [TEST, –AUTO]. ONETOUCHPLAY DIRECT NAVIGATOR TOPMENU FUNCTIONS 0 RECEIVER AV SYSTEM TV RECORDER DVD BD/DVD PLAYER ANALOG 6CH VCRCD TUNER BAND CH VOLUME DISC SKIP SLOW/SEARCH STOP PAUSE PLAY DRIVE SELECT CM SKIP ENTER SUB MENU RETURN OFF SUBWOOFER TV LEVEL EFFECT VOL NEO:6 SFC MUSIC MOVIE TEST MUTING TV/VIDEO DIMMER XM DISPLAY ENTER DIRECT TUNING XM CAT XM CH AUTO 1 To turn the unit on Press • The standby indicator “^” goes off when you turn the unit on. 2 To select “SPEAKERS A” Press (on the unit) to switch “ ” on. 3 Connect the setup microphone. 4 5 Place the setup microphone. • Place the setup microphone on a flat surface to stabilize it. Examples: a level bench sharing the height with the seating area, a top section of a sofa etc.. • Set the microphone at seated ear height. Use a tripod (for camera and other products) for best results. To start the setup Press and hold (on the remote control) for 2 seconds. • The “AUTO SPEAKER SETUP” indicator flashes. • When all auto settings are made, “COMPLETE ” appears and the “AUTO SPEAKER SETUP” indicator lights on. • The auto speaker setup takes about 3 minutes to finish in the case of a 5.1-channel system. • The unit cancels the auto speaker setup halfway through when you give a different operational instruction before the setup finishes. • You can perform other operations after “COMPLETE ” is displayed. The unit keeps the settings even if you move straight on to another opera...