Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
Tip Press x to stop scanning. Manual tuning preset You can manually tune in and store the radio frequency of the desired stations. 1 Press TUNER BAND (or FUNCTION repeatedly) to switch the function to tuner. 2 Press TUNER BAND repeatedly to select “FM” or “AM”. 3 Press TUNING MODE repeatedly until “AUTO” and “PRESET” disappear from the display. 4 Press TUNING + or – repeatedly to tune in the desired station. 5 Press TUNER MEMORY. 6 Press . or > repeatedly to select the desired preset number. 7 Press ENTER. 8 Repeat steps 2 through 7 to preset other stations. Other operations To Do this Tune in a station Follow the procedure described with a weak signal in “Manual tuning preset” (page 14). Set another station Start over from step 2. After to the existing step 5, press . or > preset number repeatedly to select the preset number you want to store the station. To improve tuner reception When tuner reception is poor, set CD player power off by CD power manage function. CD power is factory set to on. 1 Press CD (or FUNCTION repeatedly). 2 Press ?/1 to turn off the system. 3 After “STANDBY” stops flashing, press and hold x then ?/1 on the unit. “CD POWER OFF” appears. To set CD power on Repeat the procedures above and “CD POWER ON” appears. Notes • When “CD POWER OFF” is selected, disc access time is increased. • You cannot change the setting in Power Saving Mode (page 20). 14GB To change the AM tuning interval (except for European model) The AM tuning interval is factory-preset to 9 kHz (or 10 kHz for some areas). To change the AM tuning interval, tune in any AM station first, then turn off the system. While holding M> on the unit, press ?/1 on the unit. When you change the interval, all the AM preset stations are erased. To reset the interval, repeat the same procedure. Note You cannot change the AM tuning interval in Power Saving Mode (page 20). Tips • The preset stations are retained for about a day even if you disconnect the power cord or if a power failure occurs. • To improve broadcast reception, adjust the supplied antennas, or connect a commercially available external antenna. Listening to the radio You can listen to a radio station either by selecting a preset station, or by manually tuning in the station. Listening to a preset station — Preset Tuning Preset radio stations in the tuner’s memory first (see “Presetting radio stations” on page 13). 1 Press TUNER BAND (or FUNCTION repeatedly) to switch the function to tuner. 2 Press TUNER BAND repeatedly to select “FM” or “AM”. 3 Press TUNING MODE repeatedly until “PRESET” appears in the display. 4 Press . or > repeatedly to select the desired preset station. Listening to non-preset radio station — Manual Tuning 1 Press TUNER BAND (or FUNCTION repeatedly) to switch the function to tuner. 2 Press TUNER BAND repeatedly to select “FM” or “AM”. 3 Press TUNING MODE repeatedly until “AUTO” and “PRESET” disappear from the display. 4 Press TUNING + or – repeatedly to tune in the desired station. Note When tuner function is selected as the current function and CD is pressed to select CD during “CD POWER OFF”, it may take some time to switch the function (page 14). Tuner continued 15GB Tips • To improve broadcast reception, adjust the supplied antennas, or connect a commercially available external antenna. • When using a personal computer and listening to the radio, connecting a commercially available external antenna is recommended. • When an FM stereo program has static noise, press FM MODE repeatedly until “MONO” appears. There will be no stereo effect, but the reception will improve. • Press TUNING MODE repeatedly until “AUTO” appears in step 3 above, then press TUNING + or –. The frequency indication changes and scanning stops when the system tunes in a station (Automatic Tuning). Using the Radio Data System (RDS) (European model only) What is the Radio Data System? Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal. RDS is available only on FM stations.* Note RDS may not work properly if the station you are tuned in is not transmitting the RDS signal properly or if the signal is weak. * Not all FM stations provide RDS service, nor do they provide the same types of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area. Receiving RDS broadcasts Simply select a station from the FM band. When you tune in a station that provides RDS services, the station name appears in the display. To check the RDS information Each time you press DISPLAY, the display changes cyclically as follows: Station name1) t Preset number2) and frequency t Clock display 1) If the RDS broadcast is not properly received, the station name may not appear in the display. 2) Preset number is displayed only if you preset radio stations. 16GB Sound Adjustment Adjusting the sound You can reinforce the bass and create a more powerfu...
Otros modelos de este manual:Cine en casa - AWP-ZP1 (457.4 kb)
Cine en casa - AWP-ZP5 (457.4 kb)