Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
[CENTER] to [YES] in the [SIZE] setting.) [SURROUND] Surround speaker distance from the 3.0 m/10 ft* listening position can be set in 0.2 (appears except meter (1 ft) increments from 0.0 to when you set 7.0 meters (0 to 23 ft). [SURROUND] to [NONE] in the [SIZE] setting.) * When you perform the Quick Setup (page 21), the default settings are changed. Note • When you set the distance, the sound cuts off for a moment. • If all front and surround speakers are not placed at an equal distance from your listening position, set the distance according to the closest speaker. • Do not place the surround speakers farther away from your listening position than the front speakers. • Depending on the input stream, the [DISTANCE] setting may not be effective. x [LEVEL (FRONT)] You can vary the level of front speakers as follows. Be sure to set [TEST TONE] to [ON] for easy adjustment. [L] Set this between –6 dB and 0 dB 0 dB in 1 dB increments. [R] Set this between –6 dB and 0 dB 0 dB in 1 dB increments. [CENTER] Set this between –6 dB and +6 dB 0 dB in 1 dB increments. (appears when you set [CENTER] to [YES] in the [SIZE] setting.) [SUBWOOFER] Set this between –6 dB and +6 dB 0 dB in 1 dB increments. x [LEVEL (SURROUND)] You can vary the level of surround speakers as follows. Be sure to set [TEST TONE] to [ON] for easy adjustment. (This settings appear except when you set [SURROUND] to [NONE] in the [SIZE] setting.) 68GB 7 From your listening position, adjust the [L] Set this between –6 dB and +6 dB in 0 dB 1 dB increments. [R] Set this between –6 dB and +6 dB in 0 dB 1 dB increments. To adjust the volume of all the speakers at one time Use the VOLUME control on the system, or press VOLUME +/– on the remote. x [TEST TONE] The speakers will emit a test tone to adjust [LEVEL (FRONT)] and [LEVEL (SURROUND)]. [OFF] The test tone is not emitted from the speakers. [ON] The test tone is emitted from each speaker in sequence while adjusting level. When you select one of the [SPEAKER SETUP] items, the test tone is emitted from each speaker in sequence. value of [LEVEL (FRONT)] or [LEVEL (SURROUND)] using C/X/x/c. The test tone is emitted from only the speaker which you are adjusting. 8 Press ENTER when you have finished making adjustments. 9 Press X/x repeatedly to select [TEST TONE], then press ENTER. 10Press X/x repeatedly to select [OFF], then press ENTER. Note • When you adjust the speaker settings, the sound cuts off for a moment. Adjusting the speaker level by using the test tone 1 Press DISPLAY when the system is in stop mode. The Control Menu appears. 2 Press X/x to select [SETUP], then press ENTER. The options for [SETUP] appear. 3 Press X/x to select [CUSTOM], then press ENTER. The Setup Display appears. 4 Press X/x repeatedly to select [SPEAKER SETUP], then press ENTER or c. 5 Press X/x repeatedly to select [TEST TONE], then press ENTER or c. 6 Press X/x repeatedly to select [ON], then press ENTER. You will hear the test tone from each speaker in sequence. Settings and Adjustments 69GB Additional Information Precautions On power sources • AC power cord (mains lead) must be changed only at the qualified service shop. On placement • Place the system in a location with adequate ventilation to prevent heat build-up in the system. • At high volume, over long periods of time, the cabinet becomes hot to the touch. This is not a malfunction. However, touching the cabinet should be avoided. Do not place the unit in a confined space where ventilation is poor as this may cause overheating. • Do not block the ventilation slots by putting anything on the system. The system is equipped with a high power amplifier. If the ventilation slots are blocked, the unit can overheat and malfunction. • Do not place the system on a soft surface such as a rug and do not block the ventilation holes. • Do not place the system in a location near heat sources, or in a place subject to direct sunlight, excessive dust, or mechanical shock. On operation • If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the system. Should this occur, the system may not operate properly. In this case, remove the disc and leave the system turned on for about half an hour until the moisture evaporates. • When you move the system, take out any disc. If you don’t, the disc may be damaged. On adjusting volume • Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speakers may be damaged when a peak level section is suddenly played. On cleaning • Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine. If you have any questions or problems concerning your system, please consult your nearest Sony dealer. On cleaning discs • Do not use a commercially available CD/DVD cleaning disc....