Votos - 2, Puntuación media: 3
(
)
)
|
Otros manuales para este modelo:
Cine en casa - DAV-DZ560 (1.05 mb)
Cine en casa - DAV-DZ560 (1.52 mb)
Cine en casa - DAV-DZ560 (4.58 mb)
Resumen del manual
The system displays the menu and subtitles in the selected language. 6 Press . The Setup Display for selecting the aspect ratio of the TV to be connected appears. VIDEO SETUP LINE: TV TYPE: PAUSE MODE: 16:9 16:9 4:3 LETTER BOX 4:3 PAN SCAN 7 Press X/x to select the setting that matches your TV type. x If you have a wide-screen TV or a 4:3 standard TV with a wide-screen mode [16:9] (page 52) x If you have a 4:3 standard TV [4:3 LETTER BOX] or [4:3 PAN SCAN] (page 52) 8 Press . The Setup Display for selecting the output method for video signals from the EURO AV T OUTPUT (TO TV) jack on the rear panel of the unit appears. VIDEO SETUP LINE: TV TYPE: PAUSE MODE: 16:9 VIDEO VIDEO RGB 25GB Getting Started Getting Started 9 Press X/x to select the output method for video signals. • [VIDEO]: outputs video signals. • [RGB]: outputs RGB signals. Note • If your TV does not accept RGB signals, no picture appears on the TV screen even if you select [RGB]. Refer to the operating instructions supplied with your TV. 10 Press . The Setup Display for selecting the speaker formation appears. 11 Press C/c to select the speaker formation image as the speakers are actually positioned. For details, see “Getting Optimal Surround Sound for a Room” (page 81). SPEAKER FORMATION STANDARD 12 Press . 13 Connect the calibration mic to the A.CAL MIC jack on the front panel. Set up the calibration mic at the ear level using a tripod, etc. (not supplied). The front of each speaker should face the calibration mic, and there should be no obstruction between the speakers and the calibration mic. AUDIO IN / A.CAL MIC Calibration mic 14 Press C/c to select [YES]. Note • Make sure that the headphones are not connected to the unit or surround amplifier. You cannot operate following Steps with the headphones connected. 15 Press . [AUTO CALIBRATION] starts. Be quiet during the measurement. Note • Loud test sound is output when [AUTO CALIBRATION] starts. You cannot turn the volume down. Give consideration to children and neighbors. • Before [AUTO CALIBRATION], install the surround amplifier in the appropriate location. If you install the surround amplifier in an improper location, such as another room, proper measurement will not be obtained. • Avoid being in the measurement area and making noise during the measurement (which takes about 3 minutes), as it may interfere with measurement. 26GB 16 Unplug the calibration mic and press C/ c to select [YES]. Note • The environment of the room in which the system is installed may affect measurements. • If measurement fails, follow the message then retry [AUTO CALIBRATION]. 17 Press . Quick Setup is finished. All connections and setup operations are complete. To quit the Quick Setup Press DISPLAY in any Step. Tip • If you change the position of the speakers, reset the speaker settings. See “Getting Optimal Surround Sound for a Room” (page 81) and “Calibrating the Appropriate Settings Automatically” (page 82). • If you want to change any of the settings, see “Using the Setup Display” (page 50). To recall the Quick Setup display 1 Press FUNCTION +/– repeatedly until “DVD” appears in the front panel display. 2 Press DISPLAY while the system is in stop mode. The Control Menu display appears on the TV screen. 3 Press X/x to select [SETUP], then press . The options for [SETUP] appear. 4 Press X/x to select [QUICK], then press . The Quick Setup display appears. 94( 99) CUSTOM CUSTOM DVD VIDEO T 0: 01: 08 1( 1) QUICK Setting the type of video output to match your TV Depending on the connection of the TV (page 20), select the type of video output of the system. To select the type of video signal output from the HDMI OUT jack When you connect the unit and the TV with the HDMI cable, select the type of video signals output from the HDMI OUT jack. For details, refer also to the operating instructions supplied with the TV/projector, etc. 1 Press FUNCTION +/– repeatedly until “DVD” appears in the front panel display. 2 Press DISPLAY while the system is in stop mode. The Control Menu display appears on the TV screen. 3 Press X/x to select [SETUP], then press . The options for [SETUP] appear. 4 Press X/x to select [CUSTOM], then press . The Setup Display appears. 5 Press X/x to select [HDMI SETUP], then press . The options for [HDMI SETUP] appear. 6 Press X/x to select [HDMI RESOLUTION], then press . 7 Press X/x to select the desired setting, then press . • [AUTO (1920 . 1080p)]: The system outputs the optimal video signal for the connected TV. • [1920 . 1080i]: The system outputs 1920 . 1080i* video signals. • [1280 . 720p]: The system outputs 1280 . 720p* video signals. • [720 . 480p]**: The system outputs 720 . 480p* video signals. * i: interlace, p: progressive 27GB Getting Started Getting Started Getting Started ** Depending on the country model, [720 . 576p] may appear. Step 5: Enjoying Sound Note from all the Speakers • When “HDMI” lights up in the front panel display, images other than [720 . 480p] or [720 . 576p] ar...