Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
Disc 35GB Checking the audio signal format If you press AUDIO repeatedly during playback, the format of the current audio signal (PCM, Dolby Digital, DTS, etc.) appears as shown below. x DVD Example: Dolby Digital 5.1 channel LFE (Low Surround (L/R) Frequency Effect) 1: ENGLISH DOLBY DIGITAL 3 / 2 .1 LFE CL R LS RS Front (L/R) + Center Currently playing program format Example: Dolby Digital 3 channel Surround Front (L/R) (Monaural) 1:SPANISH DOLBY DIGITAL 2 / 1 S L R Currently playing program format x DATA CD (DivX video file)/DATA DVD (DivX video file) Example: MP3 audio 1:MP3 128k Bit rate Selecting a playback area for a Super Audio CD You can play the Super Audio CD (page 104) by selecting the playback area. To select a playback area on a 2 channel + Multi-channel Super Audio CD Some Super Audio CDs consist of a 2 channel playback area and a multi-channel playback area. You can select the playback area you want to listen to. 1 Press DISPLAY while the system is in stop mode. The Control Menu display appears on the TV screen. 2 Press X/x to select [MULTI/ 2CH], then press . The options for [MULTI/2CH] appear. 3 Press X/x to select the desired setting and press . • [MULTI]: You can play the multi-channel playback area. • [2CH]: You can play the 2 channel playback area. Note • You cannot change the playback area during playback. To change a playback layer when playing a hybrid Super Audio CD Some Super Audio CDs consist of an HD layer and a CD layer. You can change the playback layer you want to listen to. Note • When the Super Audio CD does not have the HD layer, you cannot select the playback layer. 1 Press DISPLAY while the system is in stop mode. The Control Menu display appears on the TV screen. 2 Press X/x to select [SUPER AUDIO CD/CD LAYER], then press . 36GB x When the current layer is the CD layer [SUPER AUDIO CD] appears. x When the current layer is the HD layer [CD] appears. 3 Press to change the layer. • [SUPER AUDIO CD]: You can play the HD layer. When the system is playing an HD layer, “SA-CD” lights up in the front panel display • [CD]: You can play the CD layer. When the system is playing a CD layer, “CD” lights up in the front panel display. Note • Each play mode function works only within the selected layer or playback area. • When you select a CD layer, you cannot change a playback area. • Super Audio CD audio signals are not output from the HDMI OUT jack. Playing a VIDEO CD with PBC functions (Ver.2.0) (PBC Playback) With PBC (Playback Control) functions, you can enjoy simple interactive operations, search functions, and other such operations. PBC playback allows you to play a VIDEO CD interactively by following the menu on the TV screen. 1 Start playing a VIDEO CD with PBC functions. The menu for your selection appears. 2 Select the item number you want using the number buttons. 3 Press . 4 Follow the instructions in the menu for interactive operations. Refer to the operating instructions supplied with the disc, as the operating procedure may differ depending on the VIDEO CD. To go back to the menu Press O RETURN. Note • Depending on the VIDEO CD, [Press ENTER] in Step 3 may appear as [Press SELECT] in the operating instructions supplied with the disc. In this case, press H. Tip • To play without using the PBC function, press ./ > or the number buttons while the system is in stop mode to select a track, then press H or . The system starts playback. You cannot play still pictures such as a menu. To return to PBC playback, press x twice, then press H. Resuming playback from the point where you stopped the disc (Resume Play) When you stop the disc, the system remembers the point where you pressed x and “RESUME” appears in the front panel display. As long as you do not remove the disc, Resume Play will work even if the system is set to standby mode by pressing "/1. 1 While playing a disc, press x to stop playback. “RESUME” appears in the front panel display. 2 Press H. The system starts playback from the point where you stopped the disc in Step 1. Note • Depending on where you stop the disc, the system may not resume playback from exactly the same point. • The point where you stopped playing may be cleared when: – you eject the disc. – the system enters standby mode (DATA CD/ DATA DVD only). – you change or reset the settings on the Setup Display. – you change the parental control level. Disc 37GB – you change the function by pressing FUNCTION +/–. – you disconnect the AC power cord (mains lead). • For a DVD-VR, VIDEO CD, Super Audio CD, CD, DATA CD, or DATA DVD, the system remembers the resume playback point for the current disc. • Resume Play does not work during Program Play and Shuffle Play. • This function may not work properly with some discs. Tip • To play from the beginning of the disc, press x twice, then press H. To enjoy a disc that is played before by resume playback (Multi-disc Resume) This system recalls the point where you stopped the disc the last time it was played and resum...