Votos - 3, Puntuación media: 4.3 ( )

Fabricar: Samsung Tamaño del archivo: 5.9 mb Nombre del archivo: Idioma del manual:

Otros manuales para este modelo:

Cine en casa - HT-D350 (4.5 mb)

Cine en casa - HT-D350 (5.88 mb)

When you connect Samsung products with BD-Wise to each other via HDMI, the optimum Video Out Signal Different countries apply different TV standard. You can select from NTSC or PAL. • NTSC : You can select the NTSC video format • PAL : You can select the PAL video format Audio resolution will be set automatically. • On : The original resolution of the DVD disc will be output to the TV direct. Speaker Setting Speaker Size • Off : The output resolution will be fixed according to the Resolution previously set, You can set the Speaker Size of the Center and Surround regardless of the resolution of the disc. Speakers, as well as Test Tone in this mode. English 19 HT-D350-XU_ENG-1228.indd 19 2011-12-28 3:10:13 Setup Settings mMove " Select ' Return Speaker Setting Speaker Size > Sound Edit Delay Time Test Tone : Off Select Return • For the Front, the mode is set to Small. • For the Subwoofer, the mode is set to Present. • For the Center and Surround, you can switch the mode to Small or None. -Small : Select this when using the speakers. -None : Select this when no speaker is connected. .NOTE . The speaker mode may vary depending on the Dolby Pro Logic and Stereo settings. Sound Edit You can adjust the balance and level for each speaker. Settings mMove " Select ' Return Sound Edit buttons to adjust the settings. Adjusting Front/Surround Bal. . You can select between 0 and -6. . The volume decreases as you move closer to –6. Adjusting Center/Surround/Subwoofer Level . The volume level can be adjusted in steps from +6dB to –6dB. . The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB. 20 English Delay Time If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the Center and Surround speakers. You can also set the Test Tone in this mode. Setting up the Speaker Delay Time When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the Center and Surround Speakers. Settings mMove " Select ' Return " Select ' Return Use the Test Tone feature to check the speaker connections. • Press the <> buttons to select On. • The test tone will be sent to Front Left . Center . Front Right . Surround Right . Surround Left . Subwoofer in order. To stop the test tone, press the ENTER button. HT-D350-XU_ENG-1228.indd 20 2011-12-28 3:10:18 03 Setup DRC (Dynamic Range Compression) System This feature balances the range between the loudest and quietest sounds. You can use this function to Initial Settings enjoy Dolby Digital sound when watching movies at low volume at night. By using the Initial Settings, you can set the language and TV aspect. You can select either Full, 6/8, 4/8, 2/8, off. • . . NOTE If the HDMI cable is connected to the product, TV aspect does not appear and it is set to 16:9 AUDIO SYNC Video and audio sync may not match with digital TV. Wide automatically. If this occurs, adjust the audio delay time to match the video DivX(R) Registration View DivX(R) VOD Registration Code to purchase and play DivX(R) VOD content. You can set the audio delay time between 0ms and 300ms. Set it to the optimal status. • HDMI AUDIO Language You can select the language you prefer for on- screen menu, disc menu, etc. The audio signals transmitted over the HDMI Cable can be toggled On/Off. Off : Video is transmitted over the HDMI connection cable only, and audio is output • through the product speakers only. On : Both video and audio signals are transmitted over the HDMI connection cable, and audio • is output through your TV speakers only. OSD Language Disc Menu Audio Subtitle Select the language for the on- screen displays. Select the language for the disc menu displays. . . . . . NOTE The default setting of this function is HDMI Audio Off. HDMI Audio is automatically down-mixed to 2ch for TV speakers. When HDMI Audio is set to On, PL II /DSP EQ /P.BASS doesn't work. With HDMI AUDIO set to 'On', the volume can be Select the language for disc audio. Select the language for disc subtitles. a To select a language that does not appear in the adjusted only using the TV remote control. menu, select OTHERS in the Disc Menu, Audio and Subtitle, and enter the language code of your country (see page 31). a You cannot select OTHERS in the OSD Language menu. . . NOTE The selected language will only appear if it is...

Descargar ahora

Introduzca dos números de la imagen: