Votos - 6, Puntuación media: 3.8
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
6. Press the ^Ў buttons to select Manual, and then press the ENTER button. 7. Press the Ў button to go to the first entry field (IP Address). 8. Use the number buttons to enter numbers. 9. When done with each field, press the > button to move successively to the next field. You can also use the other arrow buttons to move up, down, and back. 10. Enter the IP Address, Subnet Mask, and Gateway values. 11. Press the Ў to go to DNS Mode. 12. Press the Ў button to go to the first DNS entry field. Enter the numbers as above. 13. The Network Status screen appears. The product connects to the network after the network connection is verified. WPS(PBC) The easiest way to set up the wireless network connection is using the WPS(PBC) function or the One Foot Connection function. If your wireless router has a WPS(PBC) button, follow these steps: 1. Press the ^Ў buttons to select WPS(PBC). English 35 HT-D4500_ELS_1223.indd 35 2011-12-23 3:59:09 Setup Press the WPS(PBC) button on your router within two minutes. Your product displays the Network Selection Screen, and automatically acquires all the network settings values it needs and connects to your network. When it is done, it displays an OK button. Press the ENTER button on your remote. One Foot Connection Settings Display Audio Network System Language Security General Support Network Settings > Move " Enter ' Return One FootConnection Wireless(General) Select a network connection type. Connect to the Wireless Router easily by pressing theWPS(PBC) button. Choose this if your Wireless Routersupports Push Button Configuration(PBC). WPS(PBC) Press the ENTER button.2. 3. You can set up the wireless connection automatically if you have a Samsung Wireless Router which supports One Foot Connection. To connect using the One Foot Connection function, follow these steps: 1. Press the ^Ў buttons to select One Foot Connection. 2. 3. 4. Settings Display Audio Network System Language Security General Support Network Settings > Move " Enter ' Return Wireless(General) Select a network connection type. Connect to your wireless network automatically if yourWireless Router supports One Foot Connection. Selectthis connection type after placing the Wireless Routerwithin 10 inches(25cm) of Samsung Wireless LAN Adapter.One FootConnection Press the ENTER button. Place the Samsung Wireless Router within 25 cm (10 inches) of Samsung Wireless LAN Adapter to connect. Wait until the connection is automatically established. 36 English Network Status Check whether a connection to the network and the Internet have been established. Settings Display Audio Network System Language Security General Support Network Status < Move " Enter ' Return MAC Address XX:XX:XX:XX:XX:XX IP Address 0.0.0.0 Subnet Mask 0.0.0.0 Gateway 0.0.0.0 DNS Server 0.0.0.0 Internet is connected successfully.If you have a problem using any Internet services, contact your Internet serviceprovider. KT_WLAN IP Settings Retry OK BD-LIVE Internet Connection Set to allow or prohibit an Internet connection when you use the BD-LIVE service. • Allow (All) : The Internet connection is allowed for all BD-LIVE contents. • Allow (Valid Only) : The Internet connection is allowed only for BD-LIVE contents containing a valid certificate. • Prohibit : No Internet connection is allowed for any BD-LIVE content. .NOTE . What is a valid certifi cate? When the product uses BD-LIVE to send the disc data and a request to the server to certify the disc, the server uses the transmitted data to check if the disc is valid and sends the certificate back to the product. . The Internet connection may be restrictedwhile you are using BD-LIVE contents. System Initial Settings By using the Initial Settings function, you can set the language, Network Settings, etc. For more information about the Initial Settings function, refer to the Initial Settings section of this user manual. (See page 25) HT-D4500_ELS_1223.indd 36 2011-12-23 3:59:10 03 Setup Anynet+ (HDMI-CEC) Anynet+ is a convenient function that offers linked operations with other Samsung products that have the Anynet+ feature. To operate this function, connect this product to a Samsung TV with an HDMI cable. With Anynet+ on, you can operate this product using a Samsung TV remote control and start disc playback simply by pressing the PLAY (>) button on the TV’s remote control. For more information, please see the TV user manual. • Off : Anynet+ functions will not work. • On : Anynet+ functions will work. .NOTE . This function is not available if the HDMI cable does not support CEC. . If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function. . Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV. BD Data Management Lets you manage the downloaded contents you accessed through a Blu-ray Disc that supports the BD-LIVE service and stored on an attached Flash memory device. You can check the device’s information including the storage siz...
Otros modelos de este manual:Cine en casa - HT-D4500 (4.12 mb)