Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
Compared to Dolby Digital,audio compression rate is relatively low. This fact allows DTS Digital Surround format to add breadth and depth to the reproduced sounds.As a result,DTS Digital Surround features natural,solid and clear sound. When the system detects DTS Digital Surround signals, the DTS indicator lights up on the display. ( ) Dolby Surround Used to reproduce sound tracks of the VCR tapes encoded with Dolby Surround ( ). This is only used for the sound sources coming through the AUX IN jacks. Dolbv Pro Logic and Dolbv 3 Stereo Dolby Surround encoding format records the left front channel, right front channel,center channel,and rear channel signals (total 4 channels)into 2 channels. The Dolby Pro Logic decoder built in this system decodes these 2 channel signals into original 4 channel signals — matrix-based multichannel reproduction,and allows you to enjoy a realistic stereo sound in your listening room. When one of Dolby Surround modes is selected,the PRO LOGIC indicator lights up on the display. • Sources recorded in Dolby Surround These are sources in which three or more channels of surround have been recorded as two channels of signals using Dolby Surround encoding technology. Dolby Surround is used for the sound tracks of movies recorded on DVDs, LDs and video cassettes to be played on stereo VCRs, as well as for the stereo broadcast signals of FM radio, TV, satellite broadcasts and cable TV. Decoding these signals with Dolby Pro Logic makes it possible to achieve multi-channel surround playback. The signals can also be played on ordinary stereo equipment, in which case they provide normal stereo sound. Manufactured under license from Dolby Laboratories. “Dolby, ” “Pro Logic, ” and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved. 35 Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 and other world-wide patents issued and pending. “DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc. ©1996 Digital Theater Systems, Inc. All rights reserved. To Select a DSP/EQ : Q Function Press the DSP/EQ Mode button. OQDD Q^-yO Press DSP/EQ on the front panel or DSP/EQ on the remote control until the required option is selected. Each time the DSP/EQ button is pressed in sequence, the equalizer and sound modes “PASS, POP, ROCK, CLASSIC, CINEMA, HALL, LIVE CLUB, DISCO” are selected in order. What is a DSP/EQ? DSP/EQ synthetically recreates the sound field to achieve a more realistic, powerful sound. DSP/EQ mode cannot be selected when a microphone is connected. When playing a DVD encoded in two or more channels, DSP/EQ mode cannot be selected. Sound Function Power Sound Function : Repress the Power Sound button. P. SND ON, P. SND OFF are displayed for a few seconds. aODD 1+ p 5 NE n IV1 U |\| * p CD Tl Tl What is a Power Sound? This system is equipped with the Power Sound feature, which makes the sound more powerful and full-bodied. When playing a DVD encoded in two or more channels, Power Sound function cannot be selected. 36 ning to the Radio You can listen to the chosen band (FM, MW or LW broadcast stations) by using either the automatic tuning or manual tuning operation. M Press the Tuner(Band) button. Select a broadcast station. • The selection toggles back and forth between "FM" "MW' I When the button is pressed, a preset | broadcast station is selected. Auto Station 1 and "LW each time the Tuner(Band) button is pressed. I Hold in the-<^,^^ button. Automatic searching I begins, and then stops when a station is tuned in. Auto Station 2 Manual Station Press the -<4, ►► button to tune to the chosen ' station. The frequency changes incrementally in either direction each time the corresponding button is pressed. 2 ■/ m Press the Function button to select the desired band (FM, Select a broadcast station. MW or LW). IJUBHniffiW Press the Stop ( ■ ) button to select the PRESET mode. Then press the button to select a station stored in the preset. See the instructions on the next page to preset stations. Press the Stop ( ■ ) button to select the MANUAL mode on the front panel. Then hold in the button to make the unit begin automatically searching for broadcast stations. BiBHUMm Press the Stop ( ■ ) button to select the MANUAL mode on the front panel. Press the button to tune to the desired station. The frequency changes incrementally in either direction each time the corresponding button is pressed. Audio ^ MO/ST^ To Listen in Mono/Stereo Press the MO/ST button. (FM only) • The selection toggles back and forth between “STEREO” and “MONO” each time the MO/ST button is pressed. • In a poor reception areas, select Mono mode for a clear, interference-free broadcast. 37 etting stations You can store up to: ♦ 15 FM stations • FM..........................Frequency Modulation ...
Otros modelos de este manual:Cine en casa - HT-DL70 (3.36 mb)
Cine en casa - HT-DL80 (3.36 mb)