Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
• [Slide Animation]: Select animation for the slide show. • [Picture Settings]: Select a predefined color setting. • [Repeat]: Repeat a selected folder. Slideshows While playing audio, access fun features such as picture and musical slideshows. Picture slideshows View a slideshow of your pictures stored in your disc or a USB storage device. 1 Select a picture from a disc or USB storage device, and then press (Play). 2 Press OPTIONS. 3 Press Navigation buttons and OK to select the following settings: • [Slide Animation]: Select an animation for the slideshow. • [Duration per slide]: Select a display speed for each picture in a slideshow. 4 Press to stop the slideshow. Musical slideshows Create a musical slideshow to play music and pictures at the same time. 1 Select a music track, and then press OK. 2 Press BACK, and go to the picture folder. 3 Select a picture, and then press (Play) to start the slideshow. 4 Press to stop slideshow. 5 Press again to stop music. Radio Listen to FM radio on your home theater, and store up to 40 radio stations. What you need • FM antenna. Note • • AM and digital radio are not supported. • • If no stereo signal is detected, you are prompted to install the radio stations again. • • For the best reception, place the antenna away from the TV or other sources of radiation. EN Tune stations 1 Connect the FM antenna as described in the quick start guide. 2 Press SOURCE repeatedly until RADIO appears on the display panel. » » If you have already installed the radio stations, the last channel that you listened to is played. » » If you have not installed any radio stations, the message AUTO INSTALL... PRESS PLAY appears on the display panel. Press (Play). 3 Press the following buttons to listen or to change radio stations: Button Action / or Alphanumeric buttons Select a preset radio station. Navigation buttons (left/ right) Search for a radio station. Navigation buttons (up/ down) Fine tune a radio frequency. Press to stop the installation of radio stations. BACK Press and hold to erase the preset radio station. OPTIONS Manual: Press once to access program mode, and press again to store the radio station. Automatic: Press and hold for three seconds to reinstall the radio stations. Listen to radio 1 Press SOURCE repeatedly until RADIO appears on the display panel. • To listen to a preset station, press or . • To search for a radio station, and then listen, press Navigation buttons (left/ right). 2 Press +/- (Volume) to change the volume. Tuning grid In some countries, you can toggle the FM tuning grid between 50 kHz and 100 kHz. Switching the tuning grid erases all preset radio stations. 1 Press SOURCE repeatedly until RADIO appears on the display panel. 2 Press . 3 Press and hold (Play) to toggle between 50 kHz or 100 kHz. MP3 player Connect your MP3 player to play your audio files or music. What you need • An MP3 player. • A 3.5mm stereo audio cable. Play music 1 Connect the MP3 player to the home theater as described in the quick start guide. 2 Press SOURCE repeatedly until MUSIC I-LINK appears on the display panel. 3 Press the buttons on the MP3 player to select and play audio files or music. iPod or iPhone When you connect a Philips dock for iPod/iPhone, you can use the home theater to play music, movies and photos from your iPod or iPhone. What you need • A Philips dock (Model: Philips DCK3060/ DCK3061). • A yellow composite cable. Note • • Charge your iPod/iPhone on the dock while the home theater is in iPod mode. EN Dock your iPod or iPhone 1 Move the slide at the bottom of the dock to STANDARD, and then connect the dock to the home theater. 2 Connect the yellow composite cable to the dock and TV. 3 Switch on the iPod or iPhone, and place it on the dock. Play music 1 Dock your iPod or iPhone (see ‘Dock your iPod or iPhone’ on page 27). 2 Press DOCK for iPod on the home theater remote control. 3 Browse on the iPod or iPhone screen to select music tracks. • To view the playlist on your TV and use the home theater remote control to select a track, press DOCK for iPod again. Play video and slideshows 1 Dock your iPod or iPhone (see ‘Dock your iPod or iPhone’ on page 27). 2 On the home theater remote control, press (Home). 3 Select [browse iPod], and then press OK. 4 Switch the TV to the AV/VIDEO source (corresponding to the yellow composite cable). » » The TV screen goes blank. 5 Browse on the iPod or iPhone screen to select videos or photos. 6 Press (Play) to play the videos or photos. Use smartphone Turn your iPhone or Android smartphone into a virtual remote control, or use it to browse the contents of a disc or USB storage device on your home theater. What you need • An iPhone (iOS 3.1.3 and above) or Android (Android 2.1 and above) smartphone. • A wired or wireless home network. Before you start • Connect your home theater to your home network (see ‘Computers and the Internet’ on page 17). • Name your home theater (see ‘Name your home theater’ on page 18). • Connect your smartp...
Otros modelos de este manual:Cine en casa - HTS5582/12 (3.73 mb)