Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
• [HDMI Video] : Selects the HDMI video resolution. • [HDMI Deep Color] : Displays colors with more shades and hues when the video content is recorded in Deep Color and the TV supports this feature. • [Blu-ray 3D video] : Selects the 3-dimensional video output when you play a 3D video on your home theater. The home theater must be connected to a 3D TV through HDMI. • [Picture Settings] : Selects a predefined color setting. 5 Press OK to confirm your choice. Note • • The best setting is automatically selected for the TV. If you need to change the setting, ensure that the TV supports the new setting. • • For settings related to HDMI, the TV must be connected through HDMI. Change audio settings 1 Press (Home). 2 Select [Setup], then press OK. 3 Select [Audio], then press OK. 4 Select and adjust the following settings: • [Night Mode] : Selects quiet or full dynamic sound. Night mode decreases the volume of loud sounds and increases the volume of soft sounds such as speech. • [HDMI Audio] : Selects HDMI audio format or disables HDMI audio output for the TV. 5 Press OK to confirm your choice. Note • • For settings related to HDMI, the TV must be connected through HDMI. • • Night mode is available for Dolby encoded DVD and Blu-ray discs (for models support Blu-ray playback). Set up network 1 Press (Home). 2 Select [Setup], then press OK. 3 Select [Network], then press OK. 4 Select and adjust the following settings: • [Network Installation] : Starts wired (Ethernet) setup. Follow the instructions to set up the network connection. • [View Network Settings] : Displays the current network settings. 5 Press OK to confirm your choice. Set up EasyLink 1 Press (Home). 2 Select [Setup], then press OK. 3 Select [EasyLink], then press OK. 4 Select and adjust the following settings: • [EasyLink] : Enables or disables EasyLink. • [One Touch Play] : Enables or disables One Touch Play. If enabled, you can use the remote control to start disc play in the home theater and the TV switches automatically to the correct channel. • [One Touch Standby] : Enables or disables One Touch Standby. If enabled, the home theater can be switched off to standby by a remote control from the TV or other connected HDMI CEC devices. • [System Audio Control] : Enables or disables System audio control. If enabled, follow the instructions on the TV to map the connected devices correctly to the audio connectors of the home theater. The home theater switches automatically to the audio source of the connected device. EN • [Audio Input Mapping] : Updates audio input mapping if there are new devices connected. 5 Press OK to confirm your choice. Note • • The connected devices must be connected through HDMI and switched on. Change preference settings 1 Press (Home). 2 Select [Setup], then press OK. 3 Select [Preference], then press OK. 4 Select and adjust the following settings: • [Menu language] : Selects the onscreen display menu language. • [Audio] : Selects audio language for video. • [Subtitle] : Selects subtitle language for video. • [Disc Menu] : Selects menu language for video disc. • [Parental Control] : Restricts access to discs that are recorded with ratings. To play all discs irrespective of the rating, select level ‘8’. • [Screen Saver] : Enables or disables screen saver mode. If enabled, the screen enters idle mode after 10 minutes of inactivity (for example, in pause or stop mode). • [Auto Subtitle Shift] : Enables or disables shift subtitle. If enabled, it adjusts the subtitle position automatically to fit the TV screen. • [Change Password] : Sets or changes a PIN code to play a restricted disc. Enter ‘0000’ if you do not have a PIN or if you have forgotten your PIN. • [Display Panel] : Changes the brightness of the display panel. • [Auto Standby] : Enables or disables auto standby. If enabled, the home theater switches to standby after 30 minutes of inactivity (for example, in pause or stop mode). • [VCD PBC] : Displays or skips the content menu for VCD and SVCD discs. • [Sleep Timer] : Sets a sleep timer to switch the home theater to standby after a specific time. 5 Press OK to confirm your choice. Note • • If your preferred disc language is not available, you can select [Other] from the list and enter the 4-digit language code which can be found at the back of this manual. • • If you select a language that is not available on a disc, the home theater uses the default language of the disc. Change advanced settings 1 Press (Home). 2 Select [Setup], then press OK. 3 Select [Advanced], then press OK. 4 Select and adjust the following settings: • [BD-Live Security] : Restricts or allows access to BD-Live. • [Enhanced Audio] : Enables or disables the audio post processing at the speaker output. • [Software Update] : Selects to update software from the network or from USB storage device. • [Clear memory] : Clears local memory, delete the BD-Live files that you previously downloaded. If using an USB storage device, the local storage folder is ‘BUDA’...