Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Each time the button is pressed, the preset time changes as follows : .10 . 20 . 30 . 60 . 90 . 120 . 150 . OFF To confi rm the sleep timer setting, press the SlEEP button. The remaining time before the Home Cinema will shut itself off is displayed. Pressing the button again changes the sleep time from what you have set earlier. To cancel the sleep timer, press the SlEEP button until OFF appears on the display. ADJUSTING DISPlAY BrIGHTNESS You can adjust the brightness of the display on the main unit so it won't interfere with your movie viewing. Press the DIMMEr button. Each time the button is pressed, the brightness of the front display will be adjusted. MUTE FUNCTION This is useful when answering a doorbell or telephone call. Press the MUTE button. MUTE appears in the display. To restore the sound, press the MUTE button again. ~ ~ ~ ~ ~ ~ convenient function convenient function V-SOUND (VIrTUAl SOUND) This feature provides virtual surround sound over 2.1 speakers. Press the V-SOUND button. Each time the button is pressed, the selection changes as follows : V-SO ON . V-SO OFF S.VOl (SMArT VOlUME) This will regulate and stabilize the volume level against a drastic volume change when changing channels or during a scene transition. Press the S.VOl button. Each time the button is pressed, the selection changes as follows : SVOl ON . SVOl OFF P.BASS/AUDIO UPSCAlING P.BASS P.BASS function stresses low tones providing thudding sound effects. Press the P.BASS/AUDIO UPSCAlE button to select P.BASS mode. Each time the button is pressed, the selection changes as follows : P BAS ON . UPSC ON . OFF AUDIO UPSCAlING This also helps enhance your sound experience (ex. mp3 music). You can upscale your MP3 level sound(24 kHz, 8bit) to CD level sound(44.1 kHz, 16bit). Press the P.BASS/AUDIO UPSCAlE button to select AUDIO UPSCAlE mode. Each time the button is pressed, the selection changes as follows : P BAS ON . UPSC ON . OFF The P.BASS function is only available with 2 channel LPCM sources such as mp3,Divx,cd and wma. Press P.BASS button and "POWER BASS ON" will be displayed on the screen. ~ ~ ~ ~ M ` troubleshooting ENG Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Center. . TrOUBlESHOOTING I cannot eject the disc. • Is the power cord plugged securely into the outlet? • Turn off the power and then turn it back on. Playback does not start. • Check the region number of the DVD. DVD discs purchased from abroad may not be playable. • CD-ROMs and DVD-ROMs cannot be played on this DVD player. • Make sure that the rating level is correct. Playback does not start immediately when the Play/Pause button is pressed. • Are you using a deformed disc or a disc with scratches on the surface? • Wipe the disc clean. Sound is not produced. • No sound is heard during fast playback, slow playback, and step motion playback. • Are the speakers connected properly? Is the speaker setup correctly customized? • Is the disc severely damaged? The remote control does not work. • Is the remote control being operated within its operation range of angle and distance? • Are the batteries exhausted? • Have you selected the mode(TV/DVD) functions of the remote control (TV or DVD) correctly? • Disc is rotating but no picture is produced. • Picture quality is poor and picture is shaking. • Is the TV power on? • Are the video cables connected properly? • Is the disc dirty or damaged? • A poorly manufactured disc may not be playable. Audio language and subtitles do not work. • Audio language and subtitles will not work if the disc does not contain them. Menu screen does not appear even when the menu function is selected. • Are you using a disc that does not contain menus? Aspect ratio cannot be changed. • You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3 ratio only. Refer to the DVD disc jacket and then select the appropriate function. SYMPTOM Check/remedy troubleshooting SYMPTOM Check/remedy • The main unit is not working. • Turn off the power and hold the STOP (@) button on the (Example: The power goes out main unit for longer than 5 seconds. or strange noise is heard.) • The DVD player is not working Using the rESET function will erase all stored settings. normally. Do not use this unless necessary. The rating level password has been forgotten. • While “NO DISC” message appears on the display of main unit, hold the main unit's STOP (@) button for longer than 5 seconds. “INITIAL” appears on the display and all settings will return to the default values. • Press the POWER button. Using the rESET function will erase all stored settings. Do not use this unless necessary. Can't receive radio broadcast. • Is the antenna connected properly? • If the antenna's inpu...