Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Press ENTER. To cancel repeat play: Press REPEAT repeatedly until “RPT OFF” appears. Press ENTER. Note • After performing repeat play, be sure to press .. Otherwise, the file of USB storage device will play continuously. • During repeat play, random play is not possible. Random play The file of USB storage device can be played in random order automatically. To random play all tracks: Press RANDOM repeatedly until “RDM ON” appears. Press ENTER. To cancel random play: Press RANDOM repeatedly until “RDM OFF” appears. Press ENTER. Note • If you press the .during random play, you can move to the track selected next by the random operation. On the other hand, the . does not allow you to move to the previous track. The beginning of the track being played will be located. • In random play, the unit will select and play tracks automatically. (You cannot select the order of the tracks.) • During random play, repeat play is not possible. En USB playback USB playback Specify the folder to play To specify the folder to play, perform the following steps. 1 Press USB, and connect the USB storage device. 2 Press FOLDER, and press ./. to select desired playback folder. 3 Press ENTER. Playback will start from the first song of the selected folder. • Even if it is stopped, it is possible to press ./., to select a folder. Switch the display contents The unit can display the information recorded in the USB storage device. For details, see Switch the display contents on page 21. Playing in the desired order (Programmed Play) The unit can play folders stored on a USB storage device in the desired order. For details, see Programmed play (CD or MP3/WMA) on page 20. En Using the tuner Using the tuner Chapter 8: Using the tuner Listening to the radio broadcasts The following steps show you how to tune in to FM radio broadcasts using the automatic (search) and manual (step) tuning functions. Once you are tuned to a station you can memorize the frequency for recall later. See Saving station presets below for more on how to do this. STANDBY/ON .. CD USB TUNER AUDIO IN DISPLAY FOLDERTUNE+ 1 2 3 4 5 6 7 8 9 0 BT AUDIO iPod CLOCK/TIMER SLEEP EQUALIZER P. BAS S BASS/TREBLE RANDOMCLEAR REPEAT OPEN/CLOSE DISPLAY FOLDER MENU PRESET VOLUME ST/MONO SCAN ENTER DISPLAY + MUTE TUNE– TUNE+ DIMMER ..... .. – + – MEMORY /PROGRAM 0 DAB ENTER Tuning 1 Press the . STANDBY/ON to turn the power on. 2 Press TUNER. 3 Press TUNE +/– on the remote control to tune in to the desired station. Automatic tuning: Press and hold TUNE +/–, scanning will start automatically and the tuner will stop at the first receivable broadcast station. Manual tuning: Press the TUNE +/– repeatedly to tune in to the desired station. Note • When radio interference occurs, automatic tuning may stop automatically at that point. • Automatic tuning will skip weak signal stations. • To stop the automatic tuning, press .. To receive an FM stereo transmission: • Press ST/MONO to select stereo mode and “AUTO” will be displayed. Improving poor FM reception: 1 Press ST/MONO repeatedly to select MONO. This will change the tuner from stereo to mono and usually improve the reception. Saving station presets If you often listen to a particular radio station, it’s convenient to have the receiver store the frequency for easy recall whenever you want to listen to that station (Preset tuning). This saves the effort of manually tuning in each time. This unit can memorize up to 30 stations. DISPLAY FOLDER MENU PRESET VOLUME + MUTE TUNE– TUNE+ DIMMER.. – + – MEMORY /PROGRAM 0 ENTER DISPLAY FOLDER MENU PRESET VOLUME + MUTE TUNE– TUNE+ – + – MEMORY /PROGRAM 0 RANDOMCLEAR REPEAT ENTER 1 Tune to a station you want to memorize. See Tuning above for more on this. 2 Press MEMORY/PROGRAM. The preset number will flash. 3 Press PRESET +/– to select the preset channel number. 4 Press MEMORY/PROGRAM to store that station in memory. If the preset number has changed from flashing to lighting, before the station is memorised, repeat the operation from step 2. • Repeat steps 1 to 4 to set other stations, or to change a preset station. When a new station is stored in the memory, the station previously memorised for that preset channel number will be erased. Note • The backup function protects the memorised stations for a few hours should there be a power failure or the AC power cord become disconnected. En Using the tuner Using the tuner To recall a memorised station 1 Press PRESET +/– to select the desired station. To scan the preset stations The stations saved in the memory can be scanned automatically. (Preset memory scan) 1 Press and hold PRESET +/–. The preset number will appear and the programmed stations will be tuned in sequentially, for 5 seconds each. 2 Press PRESET +/– again when the desired station is located. To erase entire preset memory 1 Press TUNER on the remote control. 2 Press CLEAR until “MEM CLR” appears. Note • All stations will be erased. Listening to the DAB+ About DAB+ (Digital Audio Broadcasting) ...
Otros modelos de este manual:Cine en casa - X-SMC00DAB (3.9 mb)
Cine en casa - X-SMC00DAB-W (3.9 mb)