Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Cine en casa - NB4530A (684.74 kb)
Cine en casa - NB4530A (1.14 mb)
Resumen del manual
W/S FOLDER : Searches for a folder of MP3/WMA files. When a USB containing MP3/WMA files in several folders is being played, press W/S FOLDER to select the folder you want to play. OPTICAL : Changes input source to OPTICAL directly. MUTE @ : Mutes the sound. VOL +/-: Adjusts speaker volume. • • • • • • • • • • b • • • • • • • • • AUTO POWER : This function is automatically turned on the unit. (Refer to the page 22) AV SYNC : Synchronizes the audio and video. INFO : Displays the information of a file or an input source. REPEAT : Listens to your files repeatedly or randomly. C/V (Skip/Search) : - Skips Fast backward or Forward. - Searches for a section within a file. Z (Stop) : Stops playback. d/M (Play/Pause) : Starts playback. / Pauses playback. SOUND EFFECT : Selects a sound effect mode. AUTO VOLUME : Turns on and off the AUTO VOLUME mode. WOOFER LEVEL : Sets the sound level of woofer. • • • • • • • • • • c • • • • • • • • • 0 to 9 numerical buttons : Selects a file directly. DRC : Sets the DRC. SLEEP : Sets the system to turn off automatically at a specified time. • • • • • • • • • • d • • • • • • • • • TV Control buttons : See page 27. 1 Getting Started 8 Getting Started 1 Getting Started Front panel A 1/! B - / + ( Volume -/+) Adjusts volume level. C T (Play/Pause) D I (Stop) E F (Function) Selects the function and input source. F Display window Rear panel >Caution Precautions in using the touch buttons • Use the touch buttons with clean and dry hands. -In a humid environment, wipe out any moisture on the touch buttons before using. • Do not press the touch buttons hard to make it work. -If you apply too much strength, it can damage the sensor of the touch buttons. • Touch the button that you want to work in order to operate the function correctly. • Be careful not to have any conductive material such as metallic object on the touch buttons. It can cause malfunctions. DOPT.(Optical) INEHDMI IN/ OUT A DC. IN 25V 02A B USB port C PORT.(Portable) IN Getting Started 9 Installing the sound Installing the cover bar foot You can hear the sound by connecting the unit to 1 the other device : TV, Blu-ray disc player, DVD player, etc. Place the unit in front of the TV and connect it to the device you want. (Refer to pp.13 - 20) Getting Started 1. Turn the unit upside down. 2. Place the cover foot on the bottom of the unit to match screw holes with those on the unit. 3. Fix it with screws as shown in the illustration above. Note You can exchange 26 mm foot (factory installed) with 19 mm to change the height of your unit. (It has been already installed to the unit.) 26mm 19mm , 10 Connecting 2 Connecting 2. Match the T V’s BOTTOM EDGE of Wall Mount Mounting the main Bracket Installation Template with the bottom of T V and attach to the position. unit on a wall TVYou can mount the main unit on a wall. Detach the cover foot of the unit, keep the detached cover foot for later installation and use the screws to hang the unit on the wall. Prepare shaft wall mount and bracket. Unit 3. When you mount it on a wall (concrete), use the Wall Mount Bracket Wall bracket wall plugs. You should drill some holes. A guide Installation Template sheet ( Wall Mount Bracket Installation Template) is supplied to drill. Use the sheet to check the Shaft wall mount point to drill. 1. Locate the shaft wall mount on the screw hole of the unit's back and then fix it onto the unit with the screw. Connecting 11 4. Remove the Wall Mount Bracket Installation Template. 5. Fix it with screws as shown in the illustration below. 6. Hang the main unit onto the bracket as shown below. >Caution • Do not install this unit upside down. It can damage the parts of this unit or be the cause of personal injury. • Do not hang onto the installed unit and avoid any impact to the unit. • Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may result in an injury or damage to the product. • When the unit is installed on a wall, please make sure that a child does not pull any of connecting cables, as it may cause it to fall. 2 Detach the unit from the bracket as shown below. , Note Connecting 12 Connecting 2 Connecting the AC adapter 1. Connect the supplied AC power cord to the AC adapter. 2. Connect the AC adapter cable to DC. IN adapter input. 3. Plug the AC power cord into an AC outlet. Connecting Only use the AC adapter supplied with this device. Do not use a power supply from another device or manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty. >Caution Setting up Pairing wireless subwoofer LED indicator of wireless subwoofer LED Color Status Yellow The wireless subwoofer is receiving the signal of the unit. Yellow (blink) The wireless subwoofer is trying to connect. Red The Wireless subwoofer is in standby mode. Off (No display) The power cord of wireless subwoofer is disconnected. Setting up the wireless subwoofer for the first time 1. Connect the power cord of...
Otros modelos de este manual:estéreo - NB4534A (1.4 mb)