Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
OPTICAL: Changes input mode to optical directly. MUTE: Mute the unit. • • • • • • c • • • • • HOME (n): Displays or exits the [Home Menu]. INFO/DISPLAY (m): Displays or exits On-Screen Display. displays. PRESET +/-: Selects programme of Radio. TUNING +/-: Tunes in the desired radio station. ENTER (b): Acknowledges menu selection. BACK (x): Exits the menu or resumes playback. The resume play function may not work depending on the BD-ROM disc. TITLE/POP-UP: Displays the DVD title menu or BD-ROM’s pop-up menu, if available. DISC MENU: Accesses menu on a disc. • • • • • • d • • • • • Colored (R, G, Y, B) buttons: Use to navigate on menus. -B button : Selects mono/stereo in FM mode. RDS: Radio Data System. PTY: Views the programme type of the RDS. PTY SEARCH: Searches programme type. MARKER: Marks any point during playback. SEARCH: Displays or exits the search menu. SLEEP: Sets a certain period of time after which the unit will switch to off. X (REC): Records an audio CD. TV Control Buttons 7d Display window e Remote Sensor f R (OPEN/CLOSE) g LED light 7d Display window e Remote Sensor f R (OPEN/CLOSE) g LED light Getting Started 9 Front panel 1 Getting Started 1342566666 a PORT. IN b USB Port c Operation buttons 1/I (POWER) Button T (PLAY / PAUSE) I(STOP) -/+: Adjusts speaker volume. FUNC. Changes the input source or function. 10 Getting Started 1 Rear panel Getting Started 1234 56687910OPTICAL 1 OPTICAL 2 VIDIO OUT FM a Disc slot b AUX (L/R) INPUT c Cooling Fan d AC Power cordPlug into the power source. e HDMI OUT (type A, HDMI™ Connector) Connect to TV with HDMI inputs. f LAN port g OPTICAL IN 1/ 2 h VIDEO OUT i Antenna Connector j Speakers connectors Connecting 11 Speaker Connection Attaching the speakers to the player Connect the wires hooked up to the speaker to the unit. -To connect the cable to the unit, press each plastic finger pad to open the connection 2 terminals on the unit. Insert the wire and release the finger pad. -Connect the black stripe of each wire to the terminals marked -(minus) and the other end to the terminals marked + (plus). Connecting Colour Speaker Position Orange Sub woofer Any front position Red Front Front right White Front Front left yIf your TV does not accept the resolution you have set on the player, you can set resolution to 576p(or480p) as follows: Press Z (STOP) for more than 5 seconds. , 12 System Setting 3 System Setting (b). The [Setup] menu appears. Note 5. Use W/S to select the desired resolution then press ENTER (b) to confirm your selection. 3. Use W/S to select the first setup option, and press D to move to the second level. 4. Use W/S to select a second setup option, and press ENTER (b) to move to the third level. 5. Use W/S to select a desired setting, and press ENTER (b) to confirm your selection. Settings Adjust the Setup Settings You can change the settings of the player in the [Setup] menu. 1. Press HOME (n). 2. Use A/D to select the [Setup] and press ENTER Resolution Setting The player provides several output resolutions for HDMI OUT. You can change the resolution using [Setup] menu. 1. Press HOME (n). 2. Use A/D to select the [Setup] and press ENTER (b). The [Setup] menu appears. 3. Use W/S to select [DISPLAY ] option then press D to move to the second level. 4. Use W/S to select the [Resolution] option then press ENTER (b) to move to the third level. If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using W/S/ A/D and numerical buttons. If you make a mistake while entering a number, press CLEAR to clear the highlighted part. , System Setting 13 Wired Network Setup 5. The player will ask you to test the network connection. Select [OK] and press ENTER (b) to If there is a DHCP server on the local area network complete the network connection. (LAN) via wired connection, this player will 6. If you select [ Test] and press ENTER (b) at automatically be allocated an IP address. After step 5 above, the network connection status is making the physical connection, a small number of displayed on the screen. home networks may require the player’s network You can also test it on the [Connection Status] setting to be adjusted. Adjust the [NETWORK] in the [Setup] menu. setting as follow. Preparation Before setting the wired network, you need to connect the broadband internet to your home network. 1. Select [Connection Setting] option in the [Setup] menu then press ENTER (b). 3 System Setting 2. Select [ Yes] and press ENTER (b) to continue. The new connection settings reset the current network settings. 3. Use W/S/A/D to select the IP mode between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically. Note 4. Select [OK] and press ENTER (b) to apply network settings. 14 Operating General Playback Playing a Disc ert Using [HOME] menu The home menu appears when you press HOME (n). Use A/D to select a category and press...