Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
• Do not use the supplied power cord for any purpose other than that described below. • The cord on the AC adaptor is 1.5 m long. Make sure that the body of the AC adaptor is not suspended off the ground during use, as this will place unnecessary force on the DC plug. Suspended off the In contact with the ground ground • When inserting the AC adapter into a wall socket, make sure that there is no gap between the AC adaptor and the wall socket. Such a gap may cause a poor connection, and metal items like coins or paperclips falling into it may cause a short circuit and start a fire. Front view Side view Side view Metal objects such as coins and paperclips Connect the AC adaptor into a wall socket. Only connect the AC adapter when all other connections to the unit have been completed. To AC outlet Power cord 11 En Getting started 04 Getting started 04 Chapter 4: Getting started To turn the power on Press the . STANDBY/ON to turn the power on. After use: Press the . STANDBY/ON to enter the power stand-by mode. Note • In standby mode, if iPod/iPhone/iPad is connected, the unit turns charge mode. Setting the clock STANDBY/ON .. CD USB TUNER AUDIO IN 1 2 3 BT AUDIO CLOCK/TIMER SLEEP EQUALIZER OPEN/CLOSE DISPLAY FOLDER MENU PRESET VOLUME TUNE– TUNE+ MEMORY /PROGRAM ENTER 1 Press . STANDBY/ON to turn the power on. 2 Press CLOCK/TIMER on the remote control. “CLOCK” is shown on the main display. 3 Press ENTER. 4 Press ./. to set the day, then press ENTER. 5 Press ./. to set the hour, then press ENTER. 6 Press ./. to set the minute, then press ENTER to confirm. 7 Press ENTER. To confirm the time display: Press the CLOCK/TIMER. The time display will appear for about 10 seconds. To readjust the clock: Perform “Setting the clock” from step 1. Note • When power supply is restored after unit is plugged in again or after a power failure, reset the clock. General control Input function When the INPUT on main unit is pressed, the current function will change to different mode. Press the INPUT repeatedly to select desired function. X-SMC01 CD FM X-SMC01BT AUDIO IN CD FM USB/IPOD USB/IPOD AUDIO IN BT AUDIO Display brightness control Press DIMMER to dims the display brightness. The brightness can be controlled in four steps. Volume auto setting If you turn off and on the main unit with the volume set to 31 or higher, the volume starts at 30 and sets in to the last set level. Volume control Press the VOLUME –/+ on the unit or press VOLUME +/– on the remote control to increase or decrease the volume. CAUTION • The sound level at a given volume setting depends on speaker efficiency, location, and various other factors. It is advisable to avoid exposure to high volume levels. Do not turn the volume on to full at switch on. Listen to music at moderate levels. Excessive sound pressure from earphones and headphones can cause hearing loss. Muting The volume is muted temporarily when pressing the MUTE on the remote control. Press again to restore the volume. 12 En Gett...
Otros modelos de este manual:Cine en casa - X-SMC01BT-S (3.66 mb)
Cine en casa - X-SMC01BT-W (3.66 mb)
Altavoces - X-SMC01-K (3.66 mb)