Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
a.b. c. Parts List QTY a. Insta-RP Screen Material 1 b. Microfiber cleaning cloth 1 c. Scraper 1 Caution Notes: 1. This product is an adhesive rear.projection screen that can be applied to various surfaces such as transparent glass or acrylic. 2. This product is made for one.time permanent application. It has a non.reusable adhesive film that bonds firmly to a window surface. If the surface has any layer treatment such as tinting, it is likely that the layering will be damaged upon removal of the material. 3. To ensure an even and “bubble –free” installation. Make sure that the window surface is clean and evenly moistened previous to the installation. 4. Do not fold the Insta.RP material. Folding will result in a permanent crease that cannot be removed. 5. Avoid touching the material with any hard or sharp objects that may cut scratch or otherwise deface the screen. 6. The Insta.RP material is applied to a moist surface. This can impact the installation of the material by possibly creating slight ripples or bubbles. These will disappear within the first few weeks as the micro.droplets of water trapped in the adhesive evaporate. Rev.022111.AS info@elitescreens.com Installation Installation 1. Use a spray bottle filled with water and a mild detergent (1:1000 ratio column). 2. Thoroughly clean the glass surface using the correct glass.cleaning equipment. 3. Make sure that the glass surface is smooth (unblemished) and perfectly flat. 4. Cut the screen to fit the required size of the product. 5. Partially separate the film from the screen’s adhesive backing. (*Manufacturer’s Tip: It is easier to apply the screen while separating the film from the adhesive simultaneously. This keeps the material from sticking together or going on the surface unevenly. 6. Spray applicators are ideal to evenly spread the moisture before attaching the screen material to the glass. Rev.022111.AS info@elitescreens.com 7. Carefully smooth out the surface (preferably using latex gloves) to ensure that the screen is level with no bubbles or ripples present. 8. Now that the material is perfectly flat, make sure that it is aligned well. 9. Use the included Scraper or a leveling brush to eliminate the residual moisture and make sure that the material has been applied properly. 10. Allow material to stand unused for 2 to 3 hours so the adhesive can bond and set. Rev.022111.AS info@elitescreens.com Insta-RP Dimensions Table Insta-RP Dimensions Table Unit : mm Model Diagonal & Ratio Size View Height (A) View Width (B) Thickness (C) iRP74V 74"(4:3) 1125 1500 0.10 iRP99V 99"(4:3) 1500 2000 0.10 iRP68H 68"(16:9) 844 1500 0.10 iRP103X.100H 103"/100"(16:10/9) 1500 2210 0.10 iRP121H 121"(16:9) 1500 2666 0.10 iRP70X 70"(16:10) 938 1500 0.10 iRP112X 112"(16:10) 1500 2400 0.10 iRP151C 151"(2.35:1) 1500 3525 0.10 iRP10m N/A 1500 10000 0.10 Unit : inch Model Diagonal & Ratio Size View Height (A) View Width (B) Thickness (C) iRP74V 74"(4:3) 44.3 59.1 0.0039 iRP99V 99"(4:3) 59.1 78.7 0.0039 iRP68H 68"(16:9) 33.2 59.1 0.0039 iRP103X.100H 103"/100"(16:10/9) 51.9 87.0 0.0039 iRP121H 121"(16:9) 59.1 104.9 0.0039 iRP70X 70"(16:10) 36.9 59.1 0.0039 iRP112X 112"(16:10) 59.1 94.5 0.0039 iRP151C 151"(2.35:1) 59.1 138.8 0.0039 iRP10m N/A 59.1 393.7 0.0039 The listed measurements are for general reference only. Please contact Elite Screens to verify product design and dimensions before attempting to integrate its products with any structural or furniture modification. Although a manufacturer may offer product advice, it may be taken or disregarded at the integrator’s discretion. Elite Screens will not be held responsible or be otherwise liable for faulty installations Rev.022111.AS info@elitescreens.com Warranty Policy Warranty Policy • Two (2) Year parts & Labor warranty from defects in workmanship from purchase date as follows (except for refurbished units as specified below). • Three (3) Year parts and labor warranty from defects in workmanship for GEMR (Government, Educational, Military, & Religious) purchases of new product only. • Refurbished Units carry a 90.DAY parts and labor warranty. • Each party will be responsible for one way shipping during the warranty period. • A RMA (Return Merchandise Authorization) number must be issued in order to process a replacement or to authorize a return for warranty repair. Elite Screens will, at its sole option replace or repair the defective unit with a replacement *(see exceptions below) after the defective unit or parts have been received. Once the product is received, Elite Screens will send out a replacement *unit to the customer by ground service (subject to inventory availability). • Do Not Return Any Unauthorized Items to Elite Screens, as they will be refused and returned at your expense. The RMA Number must be included on the outside label of your shipping box. Our warehouse is not authorized to accept returns without an RMA numbe...