Iniciar sesión:
Votos - 5, Puntuación media: 3.4 ( )

Manual de usuario Buffalo Technology, modelo TeraStation HD-HTGL/R5

Fabricar: Buffalo Technology
Tamaño del archivo: 5.22 mb
Nombre del archivo: ef5ac768-b3ec-4a73-a37e-8deb0f99015e.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


Technical Support in Europe is available between the hours of 9am -6pm (GMT) Monday through Thursday and 9am-4:30 pm (GMT) Friday for this product. Customers in Europe can obtain Technical Support using the following information: Email: helpdesk@buffalo-technology.ie | Web: This user manual uses images representative of TeraStation user interfaces and software. Because we’re constantly updating our product, the images and text in this manual may vary slightly from the images and text displayed by your TeraStation. These changes are minor and should not affect the ease of setup adversely. As time passes, future user interfaces, updated software, and later versions of this manual may be available for download at our web site: Table of Contents TeraStation Quick Setup...................................................4 TeraNavigator Setup..........................................................8 Accessing TeraStation Data from a PC.............................14 Accessing TeraStation Data from a Mac...........................17 TeraStation Diagram.......................................................21 Advanced Settings...........................................................24 Basic Settings .................................................................25 Network Settings.............................................................26 Disk Management ...........................................................28 Adding Extra Hard Drives ...............................................34 Shared Folders................................................................38 Groups ...........................................................................42 Users..............................................................................43 Printers ..........................................................................47 Backups .......................................... ..............................51 PCast .............................................................................55 Maintenance ...................................................................56 UPS ................................................................................57 Client Utility ...................................................................67 Troubleshooting..............................................................69 Changing a Failed Hard Drive .........................................70 Technical Specifications..................................................78 Technical Support...........................................................79 TeraStation Quick Setup TeraStation Quick Setup Begin setting up your TeraStation by plugging your power cable and Ethernet cable into the back of the TeraStation as shown. TeraStation Quick Setup TeraStation Quick Setup Connect your cables Plug the power cord into a 120 volt wall socket. Plug the other end of the Ethernet cable into a hub, router, or switch in your network. 5 TeraStation Quick Setup TeraStation Quick Setup Make sure that the power switch on the rear of the TeraStation is in the ON position, with the “I” symbol pressed down. Press the power button on the front panel. The LEDs will swirl as your TeraStation boots up. After your TeraStation has completed booting up and the LEDs have ceased to swirl, check the LINK/ACT LED on the front of the TeraStation. If it’s lit, then your TeraStation is connected properly, and you can go on to page 8. If it’s not lit, turn to page 7 for troubleshooting. 6 TeraStation Quick Setup TeraStation Quick Setup The TeraStation’s Ethernet port will automatically adjust to use either a Crossover or Patch cable, so you may connect the TeraStation to your network with either type of Ethernet cable. Buffalo Technology doesn’t recommend connecting the TeraStation directly to a PC. Verify that the LINK/ACT LED on the front of TeraStation is lit (see page 6’s picture). If it’s lit, go to page 8 to continue setting up TeraStation. If the LINK/ACT LED is still not lit, try the suggestions below to verify that you’re not suffering from common setup problems. Having problems? Make sure that: • the TeraStation and the router, hub or switch are both powered on, • the Ethernet cable is securely plugged in at both ends, and • the Ethernet cable is not damaged. Verify this by trying a different Ethernet cable. If problems persist, contact our 24/7 technical support at (866) 75 -6 10 (USA & Canada only). Technical Support in Europe is available between the hours of 9am -6pm (GMT) Monday through Thursday and 9am-4:30 pm (GMT) Friday for this product. Customers in Europe can obtain Technical Support using the following information: Email: helpdesk@buffalo-technology.ie | Web: 7 TeraNavigator Setup Insert the TeraNavigator CD into your PC’s CD-ROM drive. Setup should automatically launch. If it does not, manually launch setup.exe by pressing the Start menu and selecting the R...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría