Votos - 1, Puntuación media: 5 ( )

Fabricar: Black & Decker Tamaño del archivo: 3.15 mb Nombre del archivo: Idioma del manual:

No loose clothing or jewelry to get caught in moving parts. Rubber gloves and footwear are recommended when working outdoors. 8. USE SAFETY GLASSES with most tools. Also face or dust mask if cutting operation is dusty. 9. DON'T ABUSE CORD. Never carry tool by cord or yank it to disconnect from receptacle. Keep cord from heat, oil and sharp edges. 10. SECURE WORK. Use clamps or a vise to hold work. It's safer than using your hand and it frees both hands to operate tool. 11. DON'T OVERREACH. Keep proper footing and balance at all times. 12. MAINTAIN TOOLS WITH CARE. Keep tools sharp at all times, and clean for best and safest performance. Follow instructions for lubricating and changing accessories. 13. DISCONNECT TOOLS. When not in use, before servicing; when changing accessories such as blades, bits, cutters, etc. 14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID ACCIDENTAL STARTING. Don’t carry plugged-in tool with finger on switch. Be sure switch is off when plugging in. 16. OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only extension cords suitable for use outdoors and so marked. CAUTION: When drilling into walls, floors or wherever "live” electrical wires may be encountered, DO NOT TOUCH THE CHUCK OR ANY FRONT METAL PARTS OF THE DRILL! Hold the Drill only by the plastic handle to prevent electric shock if you drill into a “live” wire. 2. IMPORTANT INFORMATION DOUBLE INSULATION Your Drill is DOUBLE-INSULATED to give you added safety. This means that it is constructed throughout with TWO separate “layers" of electrical insulation or one DOUBLE thickness of insulation between you and the tool’s electrical system. Tools built with this improved insulation system are not intended to be grounded. As a result, your Drill is equipped with a two-pronged plug which permits you to use any conventional 120 volt electrical outlet without concern for maintaining a ground connection. NOTE: DOUBLE-INSULATION does not take the place of normal safety precautions when operating this tool. The improved insulation system is for added protection against injury resulting from a possible electrical insulation failure within the tool. CAUTION: When servicing Double-Insulated Tools, use ONLY IDENTICAL REPLACEMENT PARTS. Replace or repair damaged cords. When using this drill at a considerable distance from power source, an extension cord of adequate size must be used for safety, and to prevent loss of power and over-heating. For a 120-volt tool, the minimum size of the wires in any extension cord up to 75 feet long must be 18-gauge (American Wire Gauge). From 75 to 100 feet, 16-gauge wire is required throughout the extension. 220-volt tools require a minimum wire size of only 18-gauge in extension cord lengths up to 100 feet long. (NOTE: 16-gauge wire is heavier than 18-gauge wire and will carry current for longer distances without a voltage drop.) Before using Extension Cords, inspect them for loose or exposed wires and damaged insulation. Make any needed repairs or replacement before using your power tool. Your Drill is provided with an electric cord which attaches and detaches easily from the tool. This feature permits storing the tool on a shelf, or on pegboard, without wrapping the cord around the tool. It permits cord repair or replacement without tool disassembly. The cord fits into the bottom of the tool handle as shown in Figure 1. Make sure that switch is “OFF” before inserting cord. Buttons must be in the unlocked position shown in Figure 1 to allow c...

Descargar ahora

Introduzca dos números de la imagen: