Votos - 2, Puntuación media: 4.5 ( )

Fabricar: Milwaukee Tamaño del archivo: 2.96 mb Nombre del archivo: Idioma del manual:

Meter Boxes Cat. No. 48-51-0120 (20 amp, 120 volt) (Can be used in Canada) Ammeter and power switch appear on the front panel with a single 20 amp twist lock receptacle for the drill motor on the back. Telescoping Extension Assembly Cat. No. 49-95-1000 This assembly braces the rig between the floor and ceiling for maximum rigidity. It adjusts for 14-foot ceilings and features fixed hole adjustments. Copper Washer Cat. No. 45-88-8565 Before using the tool, slip this washer onto the spindle to prevent the bit from seizing on spindle during coring. Spacer Assembly Cat. No. 49-67-0110 For use with Cat. Nos. 4125 and 4130. Mounts between cradle and Dymodrill motor when using 10" - 14" coring bits. Spacer Assembly Cat. No. 49-67-0115 For use with Cat. No. 4115 and 4120. Mounts between cradle and Dymodrill motor when using 10" - 14" coring bits. Water Collecting Ring Cat. No. 48-70-0060 For use where water flow from coring must be trapped and drained. Dike-type collector ring holds water for fast disposal when used with bits up to 10" in diameter. A built-in vacuum hose fitting also allows the ring to be used with a wet/dry vacuum cleaner. Water Hose Cat. No. 49-18-0055 This 8-foot water hose features a 5/8" coupling and standard brass male and female water hose fittings. Water Tank Cat. No. 49-76-0055 This 3-1/2 gallon heavy-duty, impact-resistant poly tank is for use where a regular tap water supply is not available. Vacuum Pad Assembly (Single Pad) Cat. No. 49-22-7100 This single vacuum pad is the same as supplied with Vac-U-Rig® Attachment Kit No. 49-22-7075. Can be used with Cat. Nos. 4115, 4125 and 4130. Vacuum Pump Assembly (115 Volts) Cat. No. 49-50-0160 This heavy-duty 1/8 H.P. pump comes complete with vacuum gauge, air filter and cord. May be mounted to the base of the unit. Same as furnished with Vac-U-Rig® 49-22-7075. Can be used with Cat. Nos. 4115, 4125 and 4130. Vacuum Pump Assembly (115 Volts) Cat. No. 49-50-0165 This heavy-duty 1/8 H.P. pump comes complete with vacuum gauge, air filter and cord. May be mounted to the base of the unit. Can be used with Cat. No. 4120. Vac-U-Rig® Attachment Kit (115 Volts) Cat. No. 49-22-7065 This kit includes: (1) vacuum pad; (1) vacuum pump assembly with gauge, filter, 8-foot air hose, and fittings. Can be used with Cat. No. 4120. Vac-U-Rig® Attachment Kit Cat. No. 49-22-7075 This kit includes: (1) vacuum pad; (1) vacuum pump assembly with gauge, filter, 8-foot air hose, and fittings. Can be used with Cat. Nos. 4115, 4125 & 4130. Threaded Adapter Cat. No. 48-04-0160 Thread Adapter reduces the thread size of 1-1/4"-7 to 5/8"-11 MILWAUKEE Dymobits and extensions. Shear Pin No. 44-60-0065 (Low Strength Shear Pin) Shear Pin No. 44-60-0032* (High Strength Shear Pin) * (Standard equipment on Dymodrills except clutch Cat. Nos. 4004, 4005, 4092, 4206 and 4097). 9" Bit Extension Cat. No. 48-95-1500 Extension threaded on both ends with a 1-1/4"-7 thread. For use with Diamond Core Bits over 2" in diameter and ...

Descargar ahora

Introduzca dos números de la imagen: