Votos - 5, Puntuación media: 4 ( )

Fabricar: Hotpoint-Ariston Tamaño del archivo: 1.89 mb Nombre del archivo: Idioma del manual:

The supply cable must not come into contact with surfaces with temperatures higher than 50°C. ! The installer must ensure that the correct electrical connection has been made and that it is compliant with safety regulations. Before connecting to the power supply, make sure that: • The appliance is earthed and the plug is compliant with the law. • The socket can withstand the maximum power of the appliance, which is indicated on the data plate (see below). • The voltage must be in the range between the values indicated on the data plate (see below). • The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it. Do not use extension cords or multiple sockets. ! Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible. ! The cable must not be bent or compressed. ! The cable must be checked regularly and replaced by authorised technicians only (see Assistance). ! The manufacturer declines any liability should these safety measures not be observed. * Only on certain models. 3 Description of the appliance Overall view Control panel n. ii ■ SELECTOR Knob Indicator light THERMOSTAT 00*00 0 UU* UUû ra S ('+) ELECTRONIC Programmer* GUIDES for the sliding racks position 5 position 4 position 3 position 2 position 1 THERMOSTAT Knob a O ! 180 140 * Only on certain models. 4 Start-up and use ! The first time you use your appliance, heat the empty oven with its door closed at its maximum temperature for at least half an hour. Ensure that the room is well ventilated before switching the oven off and opening the oven door. The appliance may produce a slightly unpleasant odour caused by the burning away of protective substances used during the manufacturing process. Starting the oven Using the cooking timer* 1. To set the buzzer, turn the COOKING TIMER knob clockwise almost one complete revolution. 2. Turn the knob anticlockwise to set the desired time: align the minutes shown on the COOKING TIMER knob with the indicator on the control panel. 3. When the selected time has elapsed, a buzzer sounds and the oven turns off. 4. When the oven is off the cooking timer can be used as a normal timer. 1. Select the desired cooking mode by turning the SELECTOR knob. 2. Select the desired temperature with the THERMOSTAT knob. See the Cooking advice table for cooking modes and the suggested cooking temperatures (see Cooking Modes). 3. When lit, the THERMOSTAT indicator light indicates that the oven is heating up to the temperature set. 4. You may do the following during cooking: - change the cooking mode by turning the SELECTOR knob. - change the temperature by turning the THERMOSTAT knob. - stop cooking by turning the SELECTOR knob to the "0" position. ! Never put objects directly on the oven bottom to avoid damaging the enamel coating. ! Always place cookware on the rack(s) provided. Cooling ventilation In order to cool down the external temperature of the oven, some models are fitted with a cooling fan that blows out air between the control panel and the oven door. ! Once the cooking has been completed, the cooling fan remains on until the oven has cooled down sufficiently. Oven light It goes on when selecting A / with the SELECTOR knob. It stays on when a cooking mode is selected. ! To use the oven manually, in other words when you do not wish to use the end of cooking timer, turn the COOKING TIMER knob until it reaches the ^ symbol. * Only on certain models. DATA PLATE Dimensions width 43.5 cm height 32 cm depth 41,5 cm Volume It. 58 Electrical connections voltage: 220-240V ~ 50Hz maximum power absorbed 2800W ENERGY LABEL Directive 2002/40/EC on the label of electric ovens. Standard EN 50304 Energy consumption for Natural convection - heating mode: /]” Convection mode. 1“ Declared energy consumption for Forced convection Class - heating mode: [5] / fiil Baking. This appliance conforms to the following European Economic Community directives: - 2006/95/EEC of 12/12/06 (Low Voltage) and subsequent amendments; - 2004/108/EEC of 15/12/04 (Electromagnetic Compatibility) and subsequent amendments; - 93/68/EEC of 22/07/93 and subsequent amendments. - 2002/96/EC and subsequent amendments. 5 The electronic cooking programmer DISPLAY END OF _ COOKING icon DURATION — icon DECREASE TIME — button "t25>00 -XUU © c • 00 0 • UU&- 3 © SET TIME button — CLOCK icon — TIMER icon — INCREASE TIME button Setting the clock ! The clock may be set when the oven Is switched off or when It Is switched on, provided that a the end time of a cooking cycle has not been programmed previously. After the appliance has been connected to the mains, or after a blackout, the icon and the four numerical digits on the DISPLAY will begin to flash. 1. Press the © button several times until the icon and the four digits on the display begin to flash....

Descargar ahora

Introduzca dos números de la imagen: