|
Resumen del manual
¦ Cooling with the appliance door open: only allow the cooking compartment to cool when it is closed. Even if the appliance door is only open a little, front panels of adjacent units could be damaged over time. ¦ Very dirty door seal: If the door seal is very dirty, the appliance door will no longer close properly when the appliance is in use. The fronts of adjacent units could be damaged. Always keep the door seal clean. ¦ Appliance door as a seat, shelf or worktop: Do not sit on the appliance door, or place or hang anything on it. Do not place any cookware or accessories on the appliance door. ¦ Inserting accessories: depending on the appliance model, accessories can scratch the door panel when closing the appliance door. Always insert the accessories into the cooking compartment as far as they will go. ¦ Carrying the appliance: do not carry or hold the appliance by the door handle. The door handle cannot support the weight of the appliance and could break. ¦ Aluminium foil: Aluminium foil in the cooking compartment must not come into contact with the door glass. This could cause permanent discolouration of the door glass. ¦ Silicone baking tins: Ovenware must be heat and steam resistant. Silicone baking tins are not suitable for combined operation with steam. ¦ Ovenware with areas of rust: Do not use any ovenware which displays areas of rust. Even the smallest spots of rust can lead to corrosion in the cooking compartment. ¦ Hot water in the water tank: Hot water can damage the pump. Only fill the water tank with cold water. ¦ Descaling solution: Do not allow descaling solution to come into contact with the control panel or other sensitive surfaces. These will damage the surfaces. If this does happen, remove the descaling solution immediately with water. ¦ Cleaning the water tank: Do not clean the water tank in the dishwasher. Otherwise, the water tank will be damaged. Clean the water tank with a soft cloth and standard washing- up liquid. Energy and environment tips Here you can find tips on how to save energy when baking and roasting and how to dispose of your appliance properly. Note: For this appliance, an energy consumption value has been established that meets DIN EN 50304/ DIN EN 60350. This energy consumption value is 30% below that for energy efficiency class A. Depending on the appliance equipment, the additional NeffLight® lighting was switched off while measuring (see section: Switching off NeffLight ®) Saving energy Only preheat the oven if this is specified in the recipe or in the operating instruction tables. Use dark, black lacquered or enamelled baking tins. They absorb the heat particularly well. Open the appliance door as little as possible during cooking, baking or roasting. It is best to bake several cakes one after the other. The cooking compartment is still warm. This may reduce the baking time for the second cake. For longer cooking times, you can switch the oven off 10 minutes before the end of the cooking time and use the residual heat to finish cooking. Environmentally-friendly disposal Dispose of packaging in an environmentally-friendly manner. This appliance is labelled in accordance with European Directive 2012/ 19/ EG concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU Your new appliance In this section, you will find information on ¦ the control panel ¦ the operating modes Control panel . . . . . . . Symbol Use / meaning ~ Operating mode selector Switching the appliance on and off Selects the desired operating mode Water tank For steam- assisted applications (see section: Filling and emptying the water tank) Electronic clock ( rapid heat up) KJ Clock function button Selects the required clock function or Rapid heat up (see section: Electronic clock) Rotary selector Makes settings within a clock function or activates Rapid heat up (see section: Electronic clock) VarioSteam ( steam- assisted cooking) I Pumping out remaining water The I symbol lights up when the remaining water is being pumped back out of the evaporator system and into the water tank. I I Descaling Filling the water tank Note: Do not remove the water tank until the I symbol has gone out. When the I symbol flashes, the appliance needs descaling (see section: Descaling) When this symbol I lights up, fill the water tank or change the water in the water tank ( e.g. during descaling) If this symbol I flashes, the water tank has not been fully pushed in. Slide in the tank as far as it will go Symbol Use / meaning • Steam intensity low When this symbol • lights up, the steam intensity is set to low z Steam intensity medium When these symbols • z light up, the steam intensity is set to medium Y Steam intensity high When these symbols • z Y light up, the steam intensity is set to high Temperature display ( Basic sett...
Otros modelos de este manual:Hornos - B45C52N3GB/04 (1.84 mb)