Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
See the Cleaning and Care chapter to release the guides or left and right hand side rails. Clean the oven door and the side surfaces inside the oven around the area with seals. : Risk of fire! ! The remains of food and grease as well as roasting juices can catch fire. Use a damp cloth to clean the inside of the oven and the accessories that will be cleaned inside the oven. Cleaning of the accessories The wire shelves or left and right hand side rails are not suitable for self cleaning. Remove these from the oven. For optimum cleaning of the oven interior, it is recommended that the self- clean function is not used with the trays. However, with the accessory support, the universal deep enamel tray or the flat enamel oven tray can also be cleaned using the self- clean function. Only clean one accessory at a time. The shelf should not be cleaned using the self-clean function. If your oven does not have this support, it can be purchased from the Technical Assistance Service or over the Internet by quoting part number 466546. The accessory support is inserted to the right and left. Use water to clean food remains, oil and roasting juices from the accessories. Place the universal deep tray or the flat oven tray on the support. : Significant health risks! Do not place non-stick baking tins or trays in the oven during self- cleaning. The intense heat removes the non- stick surface and creates toxic gases. Setting Once the cleaning level has been selected, set the oven. 1. Select the Self-cleaning q function with the function control knob. 2. Select the cleaning level with the temperature control knob. The time when the cleaning will be finished is displayed and the p symbol will be shown in square brackets. Self-cleaning starts within a few seconds. The cleaning time is displayed and the rsymbol appears in square brackets. The p symbol switches off. The oven door locks shortly after the function has started. The display panel shows the L symbol. Only when the L symbol turns off can the oven door be opened again. Self- cleaning has ended. The display panel will show ‹‹ : ‹‹ . The oven will stop heating. Turn the function control knob to the zero setting. The oven switches off. The oven door can be opened again when the L symbol on the display panel turns off. Changing the cleaning level The cleaning level cannot be changed once it has started. Stopping the self-cleaning Turn the function control knob to the zero setting. The oven switches off. The oven door can be opened again when the L symbol on the display panel turns off. Delaying the end time After using the self- clean function The oven can be set to end the self-cleaning at a specific time. Once the inside of the oven has cooled, clean the ash remains Self-cleaning can therefore be programmed at night for using a damp cloth. example, leaving the oven free for use during the day. Programme as described in point 1 and 2. Before cleaning starts, put back the time with the @ or A buttons. The oven is set to standby. The time when the cleaning will be finished is displayed and the p symbol will be shown in square brackets. When the cleaning starts, the cooking time is displayed and the r symbol appears in square brackets. The p symbol switches off. Care and cleaning If cleaned and properly cared for, your oven will keep its bright appearance and operating performance for many years to come. Advice on how to care for and clean your oven is provided below. Notes ¦ Different colours may be seen in your front panel due to the various materials used in its manufacture, such as glass, plastic and metal. ¦ Dark patches in the door's glass panel may seem to be dirt but they are in fact reflections from the oven light. ¦ Enamel burns at very high temperatures. This may cause slight discolouration. This is normal and does not affect the oven's operation. The edges of thin baking trays may not be completely enamelled. They may therefore feel slightly rough, although their corrosive protection will be unaffected. Cleaning products Follow the indications provided in the table to avoid damaging the various oven surfaces by using unsuitable cleaning products. Do not use ¦ abrasive or acidic cleaning products ¦ strong products containing alcohol ¦ scourers or hard sponges ¦ high-pressure or steam cleaners. Wash new dishcloths thoroughly before use. Zone Cleaning products Front panel Hot water and a little soap: Clean with a dishcloth and dry with a soft cloth. Do not use a glass cleaning product or a glass scraper. Stainless steel Hot water and a little soap: Clean with a dishcloth and dry with a soft cloth. Immediately remove any water marks, grease, cornflower or egg white stains since corrosion could occur underneath these marks or stains. Special products for the care of stainless steel which are suitable for hot surfaces may be obtained from Technical Assistance Service centres and specialist retail outlets. Use a very fine soft cloth to apply the cleaning product. Glass pan...
Otros modelos de este manual:Hornos - HBA63B223F/01 (2.58 mb)
Hornos - HBA63B252F/45 (2.58 mb)
Hornos - HBA63B253F/01 (2.58 mb)
Hornos - HBA63B262F/45 (2.58 mb)