Votos - 0, Puntuación media: 0 ( )

Fabricar: Bosch Tamaño del archivo: 2.44 mb Nombre del archivo: Idioma del manual:

Otros manuales para este modelo:

Hornos - HBA74B250E/01 (2.49 mb)

Hornos - HBA74B250E/01 (3.08 mb)

Guides or rails Hot water and a little soap: Soak and clean using a dishcloth or brush. Sliding guides Hot water and a little soap: Clean with a dishcloth or a brush. Do not leave this to soak or wash in a dishwasher. Accessories Hot water and a little soap: Soak and clean using a dishcloth or brush. Light The oven light can be turned on manually to facilitate cleaning. Connecting the oven bulb Turn the function control knob to the ^ position. The light will come on. Turning the oven light off Turn the function control knob to the Uposition. 12 Removing and refitting the wire shelves or left and right hand side rails The wire shelves or left and right hand side rails can be removed for cleaning. The oven must be cold. Release the guides or rails 1. Lift the front of the guide or rail and release it (figure A). 2. Then pull the guide or rail forwards completely and remove it (figure B). Clean the guides or rails with detergents and a sponge. The use of a brush is recommended for stubborn stains. Install the wire shelves or rails 1.First insert the shelf or the rail in the rear groove by pushing it back slightly (figure A) 2. then insert it in the front groove (figure B). Wire shelves or rails can be adjusted on the left and right hand side. Their curvature should always be face down. Unhooking and hanging the oven door The front panel can be unhooked to help remove the oven door and clean the glass panels. The oven door hinges are fitted with a locking lever. The door cannot be unhooked if the locking lever is closed (figure A). Once the locking lever has been opened to unhook the door (figure B), the hinges will be locked in position. This prevents the door from suddenly closing. : Risk of injuries.! The hinges may close suddenly if they are not locked in position by the lever. Note that the locking levers are always closed, apart from when unhooking the door, when the levers must be open. Unhooking the door 1.Fully open the oven door. 2.Remove both locking levers located on the right and left hand sides (figure A). 3.Fully close the oven door as far as possible (figure B). Grip the left and right hand sides of the door with both hands. Close the door slightly more and remove it. Hanging the door Rehang the door by following the same steps but in reverse order. 1.When refitting the door, check that both hinges are positioned exactly inside their respective openings (picture A). 2. The bottom groove of the hinges must fit snugly on both sides. The door may be left crooked if the hinges are not mounted properly. 3.Reclose the attachment levers (picture C). Close the oven door. : Risk of injuries.! Do not touch the hinges; the door might accidentally fall or a hinge might suddenly close. Notify the Technical Assistance Service. R e mo v i n g t h e do or c o v e r i ng The oven door cover can change colour with time. For better cleaning, we recommend removing the cover. 1. Fully open the oven door. 2. Unscrew the oven door cover. To do this, unscrew the right and left hand side bolts ( figure A) . 3. Remove the cover ( figure B) . Ensure that the oven door does not close when the cover is not in place. The inside glass may damage. Clean the surface using a product specifically for cleaning stainless steel. 4. Refit and secure it. 5. Close the oven door. Fitting and removing the glass panels The glass panels of the oven door can be removed to make cleaning easier. When removing the inner glass panels, take note of the order of disassembling. To replace the glass panels in the correct order, refer to the codes that appear on the panels. Dismantling 1. Unhook the oven door and place it on a cloth with its handle pointing downwards. 2. Unscrew the upper cover from the oven door. To do this, unscrew the right and left- hand side screws ( figure A) . 3. Lift and remove the top glass panel ( figure B) . 4. Unscrew the clips from the right and left and remove them (figure C). Remove the lower glass. Clean the glass panels using a glass cleaning product and a soft cloth. Do not use abrasive or corrosive cleaning products, glass scrapers or hard metal scourers as these could damage the glass. Installing When fitting the glass, ensure that the marking " right above" on the bottom left-hand side is upside down. 1. Insert the lower glass panel by tilting it backwards (figure A). 2. Insert the mounting clips to the right and left on the glass, aligned so that they are located on the threaded hole and tighten them ( figure B) . 3. Insert the upper glass panel backwards by tilting it with the smooth surface facing outwards. 4. Fit and tighten the cover. 5. Refit the oven door. Once the glass panels have been correctly fitted, the oven is ready to use. Troubleshooting Quite often, when there is a malfunction, it is usually a small irregularity which is easy to rectify. Before contacting the Technical Assistance Service, try to determine the cause of the fault using the following table. Troubleshooting table Fa...

Descargar ahora

Introduzca dos números de la imagen: