Votos - 5, Puntuación media: 4
(
)
)
|
Resumen del manual
Repair Clip scans the specified file checking for and repairing file errors and incomplete files. When the file is repaired it is can be used in the NLE system. 1. From the Utilities screen, go to Repair Clip. 2. Enter the number of the clip to be repaired, using the Up and Down navigation buttons. 3. Press YES and the FS-4 HD begins repairing the file. A status screen displays the progress of disk repair and at completion displays the message: • Complete indicating Repair Disk was successful. • Aborted indicating that there were errors and the repair did not complete. 4. Press BACK to return to the Utilities screen. After Using REPAIR CLIP Move Content and Re-Format After using the REPARI CLIP utility, the content must be moved from the FS4 HD's drive and the FS utility FORMAT run before resuming recording. Refer to Format Disk on page 81. FS-4 HD and FS-4Pro HD Portable DTE Recorders FS Functions File Name FILE NAME CLIP 001 20041101 - 165423 BACK This function Displays a file name but does not permit changing it. 1. From the Utilities screen, go to FILE NAME. 2. Enter the file’s clip number using the Up and Down navigationbuttons. The base file name is dynamically displayed as a function of the clip number. When a clip has multiple files, the first Base file name is displayed 3. Press BACK to return to the Utilities screen. FS-4 HD and FS-4Pro HD Portable DTE Recorders FS Functions Upgrade Check Focus Enhancements website for upgrades and latest software updates, go to To upgrade system software: 1. Set the FS-4 HD to DD DRIVE from the HDD MODE screen and connect it to a computer. 2. On your computer, rename the XXX.bin file as FS4.bin. 3. Copy or drag the FS4.bin file to the FS-4 HD while it is in DDDRIVE mode. 4. Exit the FS-4 HD from DD DRIVE mode and navigate to the Utilities screen. 5. From the Utilities screen, go to Upgrade. 6. Press Right. The following screen appears. UPGRADE PRESS SELECT TO UPGRADE SOFTWARE BACK 7. Press Select. 8. A confirmation screen appears: press YES to continue. A status screen displays the progress of the upgrade. UPGRADE UPGRADING ... FS-4 HD and FS-4Pro HD Portable DTE Recorders FS Functions 9. Up on successful completion of the upgrade, the FS-4 HD displays the message: UPGRADE COMPLETE PLEASE RESTART 10.Hold down the STOP / POWER OFF button until the FS-4 HD shuts down. 11. Power up the FS-4 HD. FS-4 HD and FS-4Pro HD Portable DTE Recorders FS Functions Upgrade Error If the upgrade fails, the FS-4 HD displays one of the following messages: UPGRADE ERROR WRONG PRODUCT ID EXIT • Wrong Product ID Verify that the upgrade is for the model of FS-4 HD it is being installed on. An upgrade is not cross- platform and must be installed on the model for which it is intended. To find the specific model of a FS-4 HD go to the SETUP screen and then version (2.0.0), refer to Setup Screens on page 62. UPGRADE ERROR FILE NOT FOUND EXIT • File Not Found Verify that the upgrade file name is fs4.bin and that it is in the FS-4 HD hard drive’s root directory. FS-4 HD and FS-4Pro HD Portable DTE Recorders FS Functions System Reset SYSTEM RESET CONTINUE TO RESET SYSTEM? YES BACK The System Reset feature restores the factory default settings for the FS-4 HD unit. This feature is useful for diagnosing problems with the unit. System Reset A System Reset can not be reversed. Diagnostic DO NOT CHANGE THE SETTINGS OF THIS FUNCTION This function is included to assist Focus Enhancement Technical Support diagnose problems that may occur with the FS-4 HD. FS-4 HD and FS-4Pro HD Portable DTE Recorders FS Functions Status STATUS SUPPLY1: 1.83V SUPPLY2: 3.27V SUPPLY3: 4.89V BATTERY: 12.56V TEMP : 39c BACK The FS-4 HD Status screen provides details of the systems power state as well as internal temperature. This screen may assist Focus Enhancements Technical Support in determining power and thermal problems with your unit. FS-4 HD and FS-4Pro HD Portable DTE Recorders FS Functions Reels Screen FS-4Pro HD only REELS R0 0 R1 1 R2 2 R3 3 When a disk is formatted, the FS-4Pro HD creates 10 folders, numbered 0-9, on the disk. During recording or playback of a clip, it is possible to place it into folders or play it from up to 10 different reels. These folders can have any name up to 10 characters in length. To name the folders it is first necessary to enter DD DRIVE mode and mount the FS-4Pro HD to a computer. Placing a Clip in a Reel From the Reels screen, choose the Reels as follows: 1. From the Utilities screen, go to Reels screen. Values include: •FA R0-0 Default Value • FA R0-0 through R9-9 “Reel Name” 2. Select a reel from the list. When selecting a REEL from this screen, the current track is marked with that REEL number. This can be done in any mode: record, stop, or playback. Each of the function keys can be set to specific reel, making it possible to quickly switch between multiple reels: a total of three reels being the maximum. Refer to Functions Screen on page 72 for more informa...