Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
On the remote keypad, enter 977. • If you want to wipe out all assigned codes, press and hold the TV button until the remote LED is lit (about 5 seconds). On the remote keypad, enter 981. J' Note: More than one code may work with your particular brand of product. If you notice a lack of response or limited functionality after setting up the remote, try a different code. J' Note: The remote status LED flashes rapidly eight times if you press an invalid key, or enter an unavailable device code. Wait seven seconds for the error to clear and start again. Direct entry of a device code Device codes can be found at the back of this owner's guide or in the System menu under Remote Control options. If you know the device code, you can do the following: To set up the remote to control your TV 1. Turn on both the 3^2^1 system and your TV. ( ) 2. Press and hold the TV button until the remote LED is lit (about five seconds). 3. On the remote keypad, enter the four-digit device code for your TV. The LED will turn off temporarily as you press each key. 4. Check that the LED turns off after the code is entered. If the LED blinks, the code is invalid. Try again. 5. Point the remote at your TV and press the TV On-Off button. If your TV does not respond, go back to step 2 and try other codes. If you are still unsuccessful, see © “Searching for a device code” on page 31. J' Note: After programming your remote to control external audio/video devices from the System menu, press the System button once to continue navigating the System menu. 30 System Controls and Indicators 11 <0n\ lOffJ To set up the remote to control your cable/satellite box 1. Turn on both the 3^2^1 system and your cable/satellite box. 2. Press and hold the CBL*SAT button until the remote LED is lit (about five seconds). 3. On the remote keypad, enter the four-digit device code for your cable/satellite box. The LED will turn off temporarily as you press each key. 4. Check that the LED turns off after the code is entered. If the LED blinks, the code is invalid. Try again. 5. Point the remote at your cable/satellite box and press the CBL*SAT On-Off button. If your cable/satellite box does not respond, go back to step 2 and try other codes. If you are still unsuccessful, see “Searching for a device code” on page 31. To set up the remote to control your VCR or DVR (such as Tivo or Replay TV brands) 1. Turn on both the 3^2^1 system and your VCR or DVR. 2. Press and hold the AUX button until the remote LED is lit (about five seconds). 3. On the remote keypad, enter the four-digit device code for your VCR/DVR. The LED will turn off temporarily as you press each key. 4. Check that the LED turns off after the code is entered. If the LED blinks, the code is invalid. Try again. 5. Point the remote at your VCR or DVR and press the AUX On-Off button. If your VCR or DVR does not respond, go back to step 2 and try other codes. If you are still unsuccessful, see “Searching for a device code” on page 31. Searching for a device code Use this method if you do not know the device code for a device. J' Note: This is a very time-consuming process. Use it as a last resort. To set up the remote to control your TV 1. Turn on both the 3^2^1 system and your TV. 2. Press and hold TV until the remote LED is lit (about five seconds). 3. Alternately press Channel ▲ and TV On-Off until your TV turns off. 4. Press Enter. Check that the remote LED turns off. 5. Point the remote at your TV and press TV On-Off. If your TV does not respond, go back to step 2 and try again. 31 System Controls and Indicators System Controls and Indicators System Controls and Indicators Channel Track Chanter Channel Track Chapter I I To set up the remote to control your cable/satellite box 1. Turn on both the 3^2^1 system and your cable/satellite box. 2. Press and hold CBL*SAT until the remote LED is lit (about five seconds). 3. Alternately press Channel A and CBL*SAT On-Off until your cable/satellite box turns off. 4. Press Enter. Check that the remote LED turns off. 5. Point the remote at your cable/satellite box and press CBL*SAT On-Off. If your cable/ satellite box does not respond, go back to step 2 and try again. To set up the remote to control your VCR or DVR (for example, TiVo or Replay TV) 1. Turn on both the 3^2^1 system and your VCR/DVR. 2. Press and hold AUX until the remote LED is lit (about five seconds). 3. Alternately press Channel ▲ and AUX On-Off until your VCR/DVR turns off. 4. Press Enter. Check that the remote LED turns off. 5. Point the remote at your VCR/DVR and press AUX On-Off. If your VCR/DVR does not respond, go back to step 2 and try again. 32 System Controls and Indicators Info O O Exit Verifying an entered device code In case you need to check to see what code the remote is using for a particular audio device, do the following: 1. Press and hold a source key (TV, CBL*SAT, or AUX) until the remote LED lights (about fiv...
Otros modelos de este manual:lector de DVD - 321 Series II (2.65 mb)
lector de DVD - 321GS Series II (2.65 mb)
lector de DVD - 321GS Series II (2.65 mb)