Votos - 5, Puntuación media: 3.6
(
)
)
|
Resumen del manual
25.MARK Button Use to mark a point where the playback starts each time when the MARK button is pressed later on. 1.MENU/PBC Button Brings up the disc menu. 2.L/R Button Selects left, right and stereo sound tracks. 3.P/N Button Selects PAL/NTSC/AUTO TV systems. 4.TITLE Button 5.SUBTITLE Button Selects the subtitle's language. 6.Number Buttons (0,1,...,9) 7.SETUP Button Brings up the setup MENU to set up the system's language, audio, display, password etc. 8.(PLAY/ENTER)/DIRECTION Buttons 9.STOP ( ) Button 10.SKIP FORWARD ( )Button Use to skip to next title, chapter or track. 11.SKIP BACKWARD ( ) Button Use to skip to previous title, chapter or track. 12.ZOOM Button 13.GOTO Button Use to enter the specific chapter, track or time to playback. 2 3 4 5 6 7 8 9 10 11 12 15 16 17 18 19 20 21 22 23 24 14 1325 1 ~ 4 ~ Description Front View Right View Bottom ViewLeft View 1.RELEASE LATCH(Battery pack separation switch) 2.BATTERYPACK 3.SPEAKER 1 1.LED LIGHT/REMOTE CONTROL SENSOR 2.USB Slot 1.LCD 2.OPEN 3.DISC COVER 4.PLAYBACK BUTTONS PLAY ( ) SKIP-PREVIOUS/FAST REVERSE( / ) SKIP-FORWARD/FAST FORWARD( / ) PAUSE /STEP( / ) STOP ( ) 1.OPEN 2.EARPHONE / SPEAKER VOLUME 3.DC IN 12V 4.POWER ON/OFF 5.VIDEO IN 6.AUDIO IN/OUT 7.VIDEO OUT 8.SPDIF: Digital audio signal output jack 9.EARPHONE JACK 5.LCD on/off switch 6.CURSOR(UP/DOWN/LEFT/ RIGHT), ENTER 7.MENU/PBC/ 8.DVD/USB LCD adj. Button 2 2 2 3 5 6 7 4 8 1 3 1 9 3 4 5 6 7 2 8 OPENOPEN 1 OPENOPEN ~ 5 ~ Using the Remote Control Using the remote control Point the remote control directly at the remote sensor on the front of the DVD Player. Installing the battery 1. Open the battery compartment cover using a coin. 3. Replace the battery compartment cover and turn clockwise until it stops. 2. Insert a 3V lithium battery into the battery compartment with the polarity ( + ) facing up as marked. Battery battery compartment cover Remote Control Sensor ~ 6 ~ Connecting Earphones (Optional Accessory) *Earphone is an optional accessory You can attach an earphone with a stereo mini-jack plug to the phone jack ( ) for private listening. The volume can be adjusted using VOL + and VOL - on the remote control. Note: When the earphone is connected to the Phone Jack ( ), the speaker will be disconnected. ~ 7 ~ Connecting to an External Component You can enjoy video from VCR or camcorder on your DVD player. 1. Turnoff DVD player, VCRand other components. 2. Connect theaudio and videocables as illustratedbelow. 3.Turn on power. AUDIO OUT VIDEO OUT LR VCR or othercomponent equipped withexternal output connectors AV CABLE(Not provided) Audio(left):White Audio(right):Red Video out: YellowVideo in: Green Audio(left):White Audio(right):Red AV adaptorcable (provided) (Mini-jack to RCA) Video out: Yellow Audio (black) Video(yellow)OPENOPEN VIDEO IN AUDIO IN/OUT ~ 8 ~ Connecting to a TV TIPS If you wishto view videoon your TV only, close thedisplay panel ofyour Player. With the displaypanel shut, usethe remote tocontrol the Player. You can enjoy DVD quality video on TV screen. 1. Turnoff DVD player and othercomponents. 2. Connect theaudio and videocables as illustratedbelow. 3.Turn on power. 4.Repeatedly pressTV/Video button on your TV to selectthe input fromthe DVD player. OPENOPEN AUDIO IN VIDEO IN LR AV CABLE(Not provided) Audio(left):White Audio(right):Red Video in: Yellow Connect to aTV equipped with external connectionjacks Video in: Green Audio(left):White Audio(right):Red AV adaptorcable (provided) (Mini-jack to RCA) Video out: Yellow Audio (black) Video(yellow) VIDEO OUT AUDIO IN/OUT ~ 9 ~ Connecting to a Stereo Component 1.Turnoff both DVD player andyour stereo system. 2.Connect theSPDIF to your stereosystem as illustratedbelow. 3.Turnon power ofDVD player. By connecting the digital output (SPDIF) on the DVD player through a coaxial cable (optional accessory) to a Dolby Digital/DTS amplifier or processor, you can enjoy full 5.1 channel surround sound. Follow these steps for making the connection. COAXIAL SPDIF(black) COAXIAL(black) Coaxial cable Depending on your amplifier system, you need to make the following selection from MENU: 1.Refer to "Changing Audio Output" on page23. 2.Select SPDIF/RAW if your amplifierhas 5.1-channel decoder. 3.Select SPDIF/PCM if your amplifierhas 2 channels. 4.Select OFF, if thereis no digitalsignal output fromthe DVD player. Coaxial cable Receiver/Amplifier OPENOPEN ~ 10 ~ Using USB Port The player accepts most USB devices such as MP3, DSC, USB- drive, Digital Camcorder etc. The USBon this Player supportsversion 1.1/2.0. USB slot Pluging a USB device 1.Plug in the USB device to the USB port on the player. 2.Repeatedly press DVD/USB to select USB mode. Removing a USB device You can remove the USB device anytime even it is playing. To remove the USB device, simply grasp the end of the USB and remove it from the slot. Playing a USB device 1.Insert the USB device and repeatedly press DVD/USB to select USB mode. The file manager appears and the first song file of the fi...