Votos - 1, Puntuación media: 3
(
)
)
|
Resumen del manual
• If all programs have already been entered, FULLY PROGRAMMED message will appear for a moment and then PROGRAM 1 will appear on the TV screen. SELECT TO EXIT PRESS ENTER SET CLOCK TIMER RECORD CHANNEL SETUP VCR SETUP PROGRAM 1 MONTH : DAY : START : STOP : CHANNEL : SPEED : REPEAT : SELECT ADJUST TO EXIT PRESS 4 44 Press 1 11 or 2 22 to choose the PROGRAM No. (1-8). 8 88 7 77 6 66 5 55 Press 4 44 to choose the MONTH item. Press 1 11 or 2 22 to choose the desired month. Press 4 44 to choose the DAY item. Press 1 11 or 2 22 to choose the desired day. Press 4 44 to choose the START item. Press 1 11 or 2 22 to choose the desired start time. Press 4 44 to choose the STOP item. Press 1 11 or 2 22 to choose the desired stop time. 9 99 Press 4 44 to choose the CHANNEL item. Press 1 11 or 2 22 to choose the desired channel (Channel, LINE1 or LINE2). Cable Users: If you have CABLE TV and used Cable Box in Connecting Antenna/Cable TV to DVD+VCR (page 12), using a cable box converter, you must set the channel in this step to match the cable box output channel (usually CH 2, 3 or 4). Change channels on the cable box instead of with the VCR. OPERATION 23 VCR Operation (Continued) 10 1100 Press 4 44 to choose the SPEED item. Press 1 11 or 2 22 to choose the desired recording speed (AUTO, SP or EP). • The AUTO mode determines how much tape is left and switches speed from SP to EP, if necessary, to complete recording the program. There will be some picture and sound distortion at the point of the speed change. Press 4 44 to choose the REPEAT item. Press 1 11 or 2 22 to choose the desired repeat (ONCE, WEEKLY, or DAILY). ONCE event....for recording up to 8 programs on a single day or over the days within a period of 1 year. WEEKLY event....for recording up to 8 programs on a certain day of every week. DAILY event....for recording up to 8 programs at the same time(s) Monday through Friday. PROGRAM 1 MONTH : JULY DAY : 6 SAT START : 6 : 00 PM STOP : 7 : 30 PM CHANNEL : 4 TV SPEED : SP REPEAT : ONCE SELECT ADJUST TO EXIT PRESS Tip If the input data is wrong, press 3 33 to select the data and correct it by pressing 1 11 or 2 22. 12 1122 Press SETUP/MENU, the program will be memorized at the VCR. • If the program preset time is past, the EVENT SCHEDULED IN THE PAST message will appear on the TV screen. Return to the incorrect program and program it with the correct time. • If you had entered a past date, the timer recording will be performed on that date of the next year. • Additional programs may be entered by repeating steps 1-12. Cable Users: If your cable hookup is via a TV converter box, you can program multiple recordings only on the converter box output channel. This is because the converter determines what channel you view through your VCR. 13 1133 Turn the DVD+VCR power off for a timer recording to take place. Tip If you are finished programming and you want to set the VCR to record the programs you have entered. A) MAKE SURE YOU HAVE INSERTED A TAPE INTO THE VCR. B) YOU MUST TURN OFF THE VCR BEFORE IT WILL RECORD ANY TIMER PROGRAMS. (TIMER indicator lights). The VCR is now set to record the preset programs. Note If the power fails or the VCR is unplugged from the AC outlet, the correct clock time and timer settings are kept in memory for approximately 3 seconds. After 3 seconds, the clock and program timer must be reset when power is restored. Reset time according to instructions. Checking (Erasing) the Timer Program Programming can be checked whenever the VCR is turned on. 1 Press SETUP/MENU and the MAIN menu will appear. 2 Press 3 or 4 to choose the TIMER RECORD menu. Press ENTER and the PROGRAM menu will appear. PROGRAM 1 SET CLOCK MONTH : JULY TIMER RECORD DAY : 6 SAT START : 6 : 00 PM CHANNEL SETUP STOP : 7 : 30 PM CHANNEL : 4 TV VCR SETUP SPEED : SP REPEAT : ONCE SELECT ENTER TO ERASE PRESS TO EXIT PRESS TO EXIT PRESS 3 Press 1 or 2 to select a program you want to check or erase. If you want to erase the program, press CLEAR. 4 Press SETUP/MENU to return to the TV screen. Program Priority If the recording start and end times of preset programs overlap on the same day (see the example and diagram left), program number 2 will not be recorded until program number 1 is finished. The first part of program number 2 will not be recorded. The same thing will happen to program number 3. 24 VCR Operation (Continued) One-Touch Recording One-Touch Recording allows you to make a recording easily of a preset length without using the program timer. Preparations: • Turn on the power of both the VCR and the TV. • Be sure the TV is set to the VCR output channel (3 or 4). • If a direct VIDEO/AUDIO connection is made between the VCR and the TV, set the TV’s source selector to VIDEO. 1 11 Insert the video cassette that the safety tab is in place. 2 22 Select the desired channel by using CH (^/Ў) or number (0-9). The channel number appears on the TV screen. • If you are recording from another source via audio/video input jacks (at the ...