Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
20 Connecting the DPS-6.5 —Continued You can connect this player to your AV receiver using the multichannel analog outputs or one of the digital outputs. In addition to these connections, you should also connect the 2 channel analog outputs for compatibility with all discs. You’ll probably also want to connect a video output to your AV receiver. You can use any of the video outputs available on this player. Before connecting • When you connect the DPS-6.5 to the amplifier, be sure to turn off the power and unplug both units from the mains before making any connections. Otherwise, the speakers may be damaged. • Connect the plugs securely. To enjoy surround sound you need to connect this player to an AV receiver using a digital output. This player has both coaxial and optical digital jacks; use whichever is convenient. To record the audio from a CD-R disc etc. to a cassette or CDR recorder that’s connected to the AV receiver, and when your AV receiver has Zone2, you must connect the DPS-6.5’s analog audio outputs to the AV receiver. You’ll probably also want to connect a video output to your AV receiver. You can use any of the video outputs available on this player (the illustration shows a standard (composite) connection). Connecting the Digital Output This player has both optical and coaxial-type digital audio outputs for connection to an AV receiver. Connect whichever is convenient. In addition to a digital connection, we recommend also connecting using the stereo analog connection. Depending on the capabilities of your AV receiver, you might have to set up this player to output only digital audio in a compatible format. See Digital Audio Out settings on page 43 and refer to the operating instructions that came with your AV receiver. 1. Connect one of DIGITAL AUDIO OUTPUT jacks on this player to a digital input on your AV receiver. This enables you to listen to surround sound. For an optical connection, use an optical cable (not supplied) to connect the “OPTICAL DIGITAL AUDIO OUTPUT” jack to an optical input on your AV receiver. For a coaxial connection, use a coaxial cable (similar to the supplied video cable) to connect the “COAXIAL DIGITAL AUDIO OUTPUT” jack to a coaxial input on your AV receiver. Connecting the Analog Output 1. Connect the FRONT/D.MIX 1 or 2 AUDIO OUTPUT and VIDEO OUTPUT jacks on this player to a set of analog audio and video inputs on your AV receiver. The diagram shows standard video connections, but you can alternatively use the S Video or component video connections if they’re available. 2. Connect the AV receiver’s video output to a video input on your TV. You can use the S Video or component video jacks to connect to the AV receiver if you prefer. Tip: • You usually have to connect the same kind of video cable between your DPS-6.5 and AV receiver, and between your AV receiver and TV. Connecting to an AV Receiver VIDEO OUTPUT VIDEO S VIDEO Y PB PR Y PB PR COMPONENT 2 COMPONENT 1 MODEL NO. DPS-6.5 RATING: AC 120 V 60Hz 11 W SUPER AUDIO CD & DVD AUDIO/ VIDEO PLAYER . R L 1 2 SURR CENTER FRONT/D. MIX AUDIO OUTPUT DIGITAL SUB WOOFER OPTICAL COAXIAL DIGITAL OPTICAL COAXIAL OPTICAL COAXIAL AV receiver Connect one or the other VIDEO S VIDEO Y R L 1 2 SURR CENTER FRONT/D. MIX AUDIO OUTPUT DIGITAL SUB WOOFER OPTICAL COAXIAL IN FRONT DVD L R VIDEO 1 2 FRONT/D. MIX AV receiver Connecting the DPS-6.5—Continued Connecting the Multichannel Analog Outputs If your AV receiver has 5.1 channel analog inputs, we recommend connecting this player to it using the multichannel analog outputs. Doing this will ensure that you can enjoy all kinds of disc, including Dolby Digital and DTS DVD-Video discs, as well as high sampling rate and multichannel DVD-Audio and SACD discs. 1. Connect the FRONT/D.MIX, SURR, CENTER, SUBWOOFER outputs on this player to the multi-channel audio inputs on your AV receiver. It’s convenient to use three stereo audio cables; one for the FRONT/D.MIX 1 or 2, one for the SURR and one for the CENTER and SUBWOOFER channels. VIDEO OUTPUT PBY PR PBY PR COMPONENT 2 COMPONENT 1 MODEL NO. DPS-6.5 RATING: AC 120V 60Hz 11W SUPER AUDIO CD & DVD AUDIO/ VIDEO PLAYER . R L SURR CENTER1 2 FRONT/D. MIX AUDIO OUTPUT DIGITAL SUB WOOFER OPTICAL COAXIAL SURR CENTER1 2FRONT/D. MIX AUDIO OUTPUT SUB WOOFER R L FRONT SUB SURR CENTER AV receiver Signal flow You can use the S video or component video jacks to connect to the AV receiver if you prefer. Tip: • After connecting up and switching on, you should change the Audio Output Mode setting in the Initial Setup menu from the default 2 Channel to 5.1 Channel. See also Audio Output Mode on page 45, 49. Connecting -compatible Components VIDEO OUTPUT RS232 VIDEO S VIDEO R PBY PR COMPONENT 1 REMOTE CONTROL IR OUT IN R L SURR CENTER1 2 FRONT/D. MIX AUDIO OUTPUT DIGITAL SUB WOOFER OPTICAL COAXIAL REMOTE CONTROL REMOTE CONTROL L R IN 1 2 FRONT/D. MIX AV receiver • The remote controller supplied with Integra AV receiver or amplifiers can be used to control the DPS6...
Otros modelos de este manual:lector de DVD - DPS-6.5 (1.96 mb)
lector de DVD - DPS-6.5 (1.96 mb)