Votos - 2, Puntuación media: 3
(
)
)
|
Resumen del manual
When the settings appear for each menu option, the currently selected setting appears with the setting indicator highlighted in one of three colors: blue, orange or yellow. These colors correspond to what formats the menu option effects as shown in the table below. Color of indicator Disc format(s) Blue DVD only Orange CD only Green All compatible formats Note If a setting applicable only to DVDs is changed while a Video CD or CD is loaded, a blue DVD icon appears in the upper right hand corner of the screen to indicate that the setting is not applicable to the currently loaded disc. The setting will be effective the next time a DVD is loaded. Changing to the Setup Screen “Expert” Menu Mode The Setup screen menus are divided into two levels, [Basic] and [Expert], to make this unit more convenient to operate for different levels of users. The [Basic] menu mode contains functions that may be considered necessary for the basic operations of this player and helpful on-screen information identified by the i mark. The [Expert] menu mode adds to the [Basic] menu mode additional functions of the player that can be adjusted to further personalize performance of the player. In this manual, functions that are contained in the [Expert] menu mode are identified by the Expert icon. Make changes to the [Setup Menu Mode] setting in the Setup screen General menu. — — GeneralA2 V2 LanguageAudio1 Video1 Setup Menu Mode Setup Navigator Parental Lock Expert Basic Off (us) Change menu mode SETUP ExitMove Settings: Expert Basic (Factory setting) Note On-screen information only appears in the [Basic] menu mode . Adjusting Audio and Video Settings Adjusting the Dynamic Range of the Audio Soundtrack Audio DRC stands for Audio Dynamic Range Compression. When Audio DRC is on, soft sounds such as dialog can be heard more clearly without making loud sounds even louder. When Audio DRC is set to [Off], there is no effect on the audio source. Make changes to the [Audio DRC] setting in the Setup screen Audio menu. — — — Down Sample On — MPEG 3 PCM V2Video1 GeneralA2 Language ExitMove Audio DRC Dolby Digital Out DTS Out Linear PCM Out MPEG Out Audio1 Off On DTS 3 PCM Dynamic playback at low volume SETUP Settings: Off (Factory setting) On Notes • Audio DRC is only effective with Dolby Digital audio sources. • The level of Audio DRC may differ depending on the DVD. • If you have set the [Dolby Digital Out] to [PCM] and the [Digital Out] setting to [On], the Audio DRC effect is output through the digital out jack. • The effect of Audio DRC depends on your speakers and AV amplifier settings. Setting the Audio 1 Options This player is capable of digital audio output for Dolby Digital, DTS, MPEG, and signals with a sampling rate of 96 kHz. Make settings in the Setup screen Audio menu to reflect the capabilities of the components that you have made digital connections to. Notes • If you have already completed the Setup Navigator screen operations, the settings on this page have already been set by the player. • If you have made only stereo line connections (analog) using the supplied audio cord, it is not necessary to make any changes in this menu. ¦ Dolby Digital Out This player is capable of outputting the Dolby Digital surround sound audio signal. When the player is connected to an AV component that has a built-in Dolby Digital decoder, select [Dolby Digital]. This player can also convert the Dolby Digital signal to a digital Linear PCM signal, the same digital signal output from a CD. Select [Dolby Digital 3 PCM] when you have made connections to an amplifier or receiver with a Dolby Pro Logic decoder or a Digital Analog Converter (DAC). — — — V2Video1 GeneralA2 Language ExitMove Audio DRC Dolby Digital Out DTS Out Linear PCM Out MPEG Out Audio1 Off Dolby Digital Dolby Digital 3 PCM Down Sample On MPEG 3 PCM Change Dolby Digital output mode SETUP Settings: Dolby Digital (Factory setting) Dolby Digital 3 PCM ¦ DTS Out This player is capable of outputting DTS digital audio for DVDs recorded in DTS. When this player is connected to an AV component that has a built-in DTS decoder, select [DTS]. If your system is not equipped to decode DTS, select [DTS 3 PCM]. Refer to the operating instructions supplied with your audio components if you are unsure about compatibility with DTS. — — — — V2Video1 GeneralA2 Language ExitMove Audio DRC Dolby Digital Out DTS Out Linear PCM Out MPEG Out Audio1 Off Dolby Digital DTS DTS3 PCM MPEG 3 PCM Change DTS output mode SETUP Settings: DTS DTS 3 PCM (Factory setting) Note If you have made digital audio connections to component(s) not equipped to decode the DTS digital bitstream, be sure to select [DTS 3 PCM]. If a DTS signal is output without decoding, the output is digital noise that could potentially cause damage to your speakers. ¦ Linear PCM Out If your AV amplifier (or other connected component) is compatible with high sampling rates (96 kHz), set this to [Down Sample Off], otherwise set it to [Down Sample On] (9...
Otros modelos de este manual:lector de DVD - DPS-7.2 (1.14 mb)
lector de DVD - DPS-7.2 (1.14 mb)