Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
• Available recording space on DVD-RW (DVD-Video format) or +RW increases only when the last recorded title is deleted. It does not increase if other titles are deleted. • Available recording space on DVD-R, DVD-R DL, +R and +R DL reduces if you have repeatedly recorded and edited more than 200 times or so. (For the second layer on DVD-R DL and +R DL, this happens after about 60 times.) • While searching, the elapsed time may not display correctly. • The unit is carrying out the recovery process. Do the following to eject the disc. 1Press [POWER 8] on the main unit to switch the unit to standby. If the unit doesn’t switch to standby, press and hold [POWER 8] on the main unit for about 10 seconds. The unit is forcibly switched to standby. 2 While the unit is off, press and hold [g] and [CH 1] on the main unit at the same time for about 5 seconds. Remove the disc. 38 15 — — — — — — — RQT8314 41 Troubleshooting guide Sound Page No sound Low volume. Distorted sound. Cannot hear the desired audio type. Cannot switch audio. • Check the connections and settings. Check the input mode on the amplifier if you have connected one. • Press [AUDIO] to select the audio. • Turn off V. Surround Sound in the following cases. – When using discs that do not have surround sound effects such as Karaoke discs. – When playing MTS broadcast programs. • The disc may have a restriction on the method of audio output. If “D. MIX” does not appear in the display when playing multi-channel DVD-Audio, only audio for the two front channels will be output. Refer to the disc’s jacket. • You cannot change the audio type when DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL or +RW is in the disc tray. • You cannot change the audio type when playing DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL or +RW. (You can select “Main” or “SAP” in “Multi-channel TV Sound ( MTS )” in the Setup menu before recording.) • When the sound is output from DIGITAL AUDIO OUT terminal, the sound effect doesn’t work if the setting of “Dolby Digital” is “Bitstream”. • There are discs where audio cannot be changed because of how the disc was created. 8–11, 38 23 27 — — 38 11, 38 — Operation Cannot operate the television. The remote control doesn’t work. • Change manufacturer code. Some televisions cannot be operated even if you change the code. • The remote control and main unit are using different codes. 15 15 The unit is on but cannot be operated. • • ’ ensor during • • ’ sunlight • he batteries. • • • “ • ’ 6 6 — — 15 15 — — — Cannot eject disc. Startup is slow. Takes time to read DVD-RAM. or about reconnect it. ed, • • he main • – – – • not been — — — — Recording, scheduled recording an Cannot record. • a disc the 4 Cannot record from external equipment. Scheduled recording does not work properly. Scheduled recording does not stop even when [g] is pressed. The scheduled program remains even after recording finishes. A part or whole of a recorded title has been lost. • Management. • The write-protect tab on the cartridge is set to Protect, or the disc is protected with DVD Management. • Some programs have limitations on the number of times they can be recorded. (CPRM) • The disc is full or nearly full. Delete unneeded titles or use another disc. • You cannot record on finalized DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL or DVD-RW (VR format) discs. • Due to peculiarities of DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL or +RW you may be unable to record onto them if you either insert and remove the disc or switch the unit on and off while a disc is loaded, a total of fifty times. • DVD-R, DVD-R DL, DVD-RW, +R, +R DL and +RW recorded on this unit may not be recordable on other Panasonic DVD recorders. • Check that the connection is correct. • Select the input channel (“IN1”, “IN2” or “DV”) for the equipment you have connected. • The scheduled program is incorrect or different scheduled program times overlap. Correct the program. • Set the clock. • If you start recording immediately after turning on the unit while “Quick Start” is set to “On”, you cannot then stop recording for a few seconds. • The scheduled program remains if set to Monday - Friday, Monday - Saturday, Sunday - Saturday or weekly. • If there is a power failure or the plug is disconnected from the household AC outlet while recording or editing, the title may be lost or the disc may become unusable. You will have to format the disc ( ) or use a new disc. We cannot offer any guarantee regarding lost titles or discs. RAM -RW(V) +R +R DL +RW RAM -RW(V) +RW 34 34 44 29, 33, 34 — — — 8, 9, 32 — 21 15 36 20 — RQT8314 42 Recording, scheduled recording and copying (Continued) Page The DV automatic recording • If images cannot be recorded or if the recording is aborted, check the connections and DV 32 function does not work. equipment settings. • You cannot start recording until the images from the DV equipment appear on the television. — • Recording may not be performed as desired...