Votos - 5, Puntuación media: 3.2
(
)
)
|
Resumen del manual
This can render the disc or the card unusable. When a disc or card has been formatted using this unit, it may not be possible to use it on any other equipment. ^R |-R dU +R +R dU Cp Formatting cannot be performed. -rW(V)| -rW(VR) You can format only as DVD-Video format on this unit. ram| Pressing [RETURN] during format will cancel the process. The disc must be reformatted if you do this. ram| fsp The disc or card cannot be formatted if the write-protect tab or switch (^ 44) is switched to “PROTECT" or “LOCK". Release the protection to continue. The message “Unable to format" appears when trying to format discs the unit cannot use. Selecting Whether to Show the Top Menu First ] ^rI -POLI JRWiV) ¿R +RDÜ +RW Before finalizing a disc, select whether the top menu shows after finalizing. Perform preparation steps 1 -4 of “Accessing the Management Menus” (^ 44). Q A, ▼ to select “Playback will start with:”, then enter Q A, ▼ to select desired item, then DVD’s Top Menu: The Top Menu appears first. First Recording: The disc content is played without displaying the Top Menu. to complete. 45 RQT8851 Setting Menus DVD and Card Management Finalizing J ( Create DVD Top Menu +R DL jR| rRDy Prwm| +R | You can play these discs on compatible DVD players by finalizing it on the unit. The menu you create with the unit can also be used on most DVD players. Perform preparation steps 1-4 of “Accessing the Management Menus” 44). Q A, ▼ to select “Finalize”, then Q W to select “Yes”, then Q W to select “Start”, then - Finalizing starts and cannot be canceled. (may take up to 15 minutes) ( -R DL| I+r dl| up to 60 minutes) - A message appears when finalizing is finished. 8 enter to complete. Notes • Do not disconnect the AC power supply cord while finalizing. This can render the disc unusable. • When finalizing a high-speed recording compatible disc, it may take longer than displayed on the confirmation screen (approximately 4 times longer). • After finalizing - fR -R dl| +r| I+r dl| The disc becomes play-only and you can no longer record or edit it. - |-RW(V)| You can record and edit the disc after formatting although it becomes play-only after finalizing. - The disc finalized on the unit may not be playable on other players depending on the condition of the recording. - There is a pause of several seconds between recordings and chapters during playback. - Recordings are divided into about 5-minute chapters* (~| +rdU 8 minutes). • This time varies greatly depending on the condition and mode of recording. Tips After you have finished recording and try to eject the disc, a screen asking if you want to finalize the disc appears ( ^13). +RW +RW discs contain no Top Menu Data. Top Menu is a convenient function. We recommend you create the menu before playing a +RW disc on other equipment. Perform preparation steps 1-4 of “Accessing the Management Menus” (^ 44). Q A, ▼ to select “Create DVD Top Menu”, then enter Q W to select “Start”, then Q W to select “Start”, then - “Create DVD Top Menu” cannot be canceled once started. - “Create DVD Top Menu” takes a few minutes. 8 to complete. Recording or editing on the disc may delete the top menu. In that case, create the top menu again. You cannot use the top menu for playing on this unit. 46 RQT8851 Basic Connection Note: The terminals on the rear of your TV may not appear as shown below. Please read terminal labels carefully to ensure correct connections. • If your TV does not have AV IN terminals (^ 50). Connecting to a Television with Direct Cable or Antenna (No Cable Box or Satellite Receiver) step step Rear of this unit step step To a household AC outlet (AC 120 V, 60 Hz) O Coaxial cable from the wall or antenna signal to the “RF IN” on the unit. © Coaxial cable (included) from the “RF OUT” on the unit to the “VHF/UHF RF IN” on the TV. © Audio/video cable (included) from the “OUT” on the unit to the “AV IN” on the TV. O AC power supply cord (included) from the “AC IN~” on the unit to a household AC outlet. 47 RQT8851 Basic Connection Note: The terminals on the rear of your TV and Cable Box may not appear as shown below. Please read terminal labels carefully to ensure correct connections. Consult your cable service provider about the appropriate cable box to use. Additional coaxial cable and audio/video (AV) cable are required. If your TV does not have AV IN terminals (^ 50). Connecting to a Television and a Cable Box Rear of TV AUDIO IN VIDEO VHF/UHF R L IN RF IN ©#<§> (op Cable from the wall$- Red White Yellow step step step step # step To a household AC outlet (AC 120 V, 60 Hz) RF IN дм I Red White Yellow tfF X ж X Rear of Cable Box N AUDIO OUTVIDEO R L OUT RF OUT O Coaxial cable from the wall to the “RF IN” on the unit. © Coaxial cable (included) from the “RF OUT” on the cable box to the “VHF/UHF RF IN” on the TV. © Audio/video cable (included) from the “OUT” on the unit to the “AV I...
Otros modelos de este manual:lector de DVD - DMREZ27 (12.56 mb)