Votos - 4, Puntuación media: 3.3
(
)
)
|
Resumen del manual
are not correct... If you happen to live close to two time zones, the VCR have recognized the PBS channel (setting channel) in the wrong time zone. Please do the following to correct the situation. a Make a note of the SETTING:CH number shown on-screen and press CH A to exit. b Delete the setting channel from the VCR channel memory. (See “To Add or Delete a Channel” section on page 14.) c Press ACTION to display the menu. d Press AT to select “SET CLOCK," and then press ► to display the “SET CLOCK” screen. e Press AT to select “AUTO CLOCK SET,” and then press ► to display the “CLOCK AUTO SET’ screen. f Press CH A to start Clock Auto Set. • If you use a cable box and have multiple PBS stations, tune the cable box to a different PBS station and try auto clock set using the menu. [Case 2) If the screen above appears, auto clock set is not available in your area. Please set the clock manually as described below. a Press ACTION to display the “SET CLOCK” screen. b Press AT and A ► to select and set the month, date, year, time, and DST. (Daylight Saving Time). kv~ SET CLOCK------ I 1/-/ 1 DST: ON fcHIW Mlil SELECT :* t KEY SET :► KEY END ¡ACTION KEY See page 5 for more on DST. To Make Corrections, repeatedly press "4 ► to move the cursor to the incorrect entry and make the correction. c Press ACTION twice to start the clock and exit this mode. ------SET CLOCK------ 4/2000 TUE 12: SET -.4 ► KEY START :ACTI ON KEY IMPORTANT NOTE FOR AUTO CLOCK SET • Auto clock set will be performed when the VCR is turned off the first time each day. If you use a cable box and you want auto clock set to be performed, the cable box must be left on and tuned to the PBS channel before the VCR power is turned off. • If you use a DSS receiver, it must be turned off for auto clock set. • If you use Audio/Video Jack connection between the VCR and Cable Box or DSS receiver, you must also connect the RF coaxial cable in order to use the auto clock set and channel auto set features. 13 Getting Started One Time VCR Setup ‘Important: If the remote control POWER, ACTION, PROG, CHA/T, INDEX, or ADD/DLT button does not work when pressed, press the VCR button on the remote and try the button again. STOP ACTION NUMBERED_ keys 100 key SELECT/SET (AT^ ►) keys O 0 o © ® © © № 00i »«uni»«» I °ñ ADD/ DELETE CHANNEL UP To Replace Channels in Memory In case you have cable installed, etc. 1 Press ACTION* to display the menu. Press AT to select “SET UP CHANNEL," and then press ► to display the “SET UP CHANNEL” screen. Press AT to select “ANTENNA,” and then press ► to set your antenna system (TV or CABLE). Press AT to select “AUTO SET,” and then press ► to display the “CHANNEL CLOCK AUTO SET” screen. • If you use a cable box, turn it on and set it to the PBS channel in your time zone. • To exit this mode, press ACTION twice. Press CH A to start Channel Auto Set. --------- MENU ------- SET UP ChANKtL IDIOMA/LANGUE: ENGL ISH SELECT:* ▼ KEY SET :► KEY END : ACT I ON KEY ---- SET UP CHANNEL ---- CA8LE AUTO SET SELECT SET END A T KEY ► KEY ACTION KEY CHANNEL/CLOCK AUTO SET CONNECT ANTENNA CABLE AND IF YOU USE A CABLE BOX, TUNE IT TO YOUR LOCAL PBS CH THEN. . . PLEASE PUSH CH UP KEY Clock Auto Set will be performed when channels are replaced in memory. To cancel, press STOP when “AUTO CLOCK SET PROCEEDING” appears on-screen. To Change On-Screen Display Language r 1 Press ACTION to display the menu. 2 Press AT to select the language. English: LANGUAGE Spanish: IDIOMA French: LANGUE 3 Press ► repeatedly to change the language. ---------MENU----- t 1-' SET UP VCR SET CLOCK SET UP CHANNEL HabuBHuwiirEw --------- MENU ---- PREPARAR VCR FIJAR RELOJ FIJAR CANAL ---------MENU---*----- REGLAGE MAGNETOSCOPE REGLAGE HORLOGE REGLAGE CANAL SELECT:* » KEY SET :► KEY END :ACT I ON KEY ELEGIR:* t FIJAR :► TERMINAR: ACT ION IMMIHdifjraiffiR FRANÇAIS SEL. :* » REGLER :► FIN : ACTION 4 Press ACTION to exit this mode. To Add or Delete a Channel 1 Select a channel using the NUMBERED keys to add or CH A/ T to delete. 2 Press ADD/DLT to add or delete the channel. • To select a channel once it's deleted, use the NUMBERED keys on the remote control. CHANNEL 08 DELETED --------- MENU --------- SET UP VCR SET CLOCK HBWi, SELECT : A ▼ KEY SET :► KEY END : ACT I ON KEY To Set or Reset the Clock In case the clock is wrong, or a power failure occurred. 1 Press ACTION to display the menu. 2 Press AT to select “SET CLOCK,” and then press ► to display the “SET CLOCK” screen. 3 Press AT to select “MANUAL,” and then press ► to display the SET CLOCK screen. 4 Press AT and to select and set the date, time, and DST. (Daylight Saving Time). 5 Press ACTION twice to start the clock and exit this mode. • For Auto Clock Set, select “AUTO CLOCK SET," and then press CH A in step 3. When Using the 100 key When selecting CABLE channels 100 to 125 with the NUMBERED keys, first press the 100 key and then enter t...
Otros modelos de este manual:VCR / vídeo - PV8400 (1.14 mb)
lector de DVD - OMNIVISION PV-8400 (1.14 mb)