Votos - 4, Puntuación media: 4.3
(
)
)
|
Resumen del manual
1. Switch your television on. 2. Point the remote control towards the television. 3. Press and hold the STANDBY/ON button and enter the two-figure code corresponding to the brand of your television, by pressing the appropriate number buttons. Controllable TV Codes BRAND BUTTON SELECO 74 SHARP 36, 37, 38, 39, 48 SIEMENS 71 SINGER 57 SINUDYNE 57 SONY 35, 48 TELEAVA 73 TELEFUNKEN 67, 73, 75, 76 THOMSON 72, 73, 75 THOMSON ASIA 80, 81 TOSHIBA 47, 48, 49, 50, 51, 52 WEGA 57 YOKO 06 ZENITH 63 Result: If your television is compatible with the remote control, it will switch off. It is now programmed to operate with the remote control. ¦ If several codes are indicated for your NOTE television brand, try each one in turn until you find one that works. ¦ If you replace the remote control's batteries, you must set the brand code again. Then you can control the television using the following buttons after the TV button. Button Function STANDBY/ON Used to switch the television on and off. INPUT SEL. Used to select an external source. VOL (+ or -) Used to adjust the volume of the television. PROG ( or ) Used to select the desired channel. TV MUTE Used to toggle the sound on and off. 0~9 Used to input number directly. NOTE ¦ The various functions will not necessarily work on all televisions. If you encounter problems, operate the television directly. 12- English Description Getting Started Front Panel (DVD-R128) 1. STANDBY/ON Turns the DVD Recorder on and off. 2. AV3 IN Connect external equipment. 3. DISC TRAY Opens to accept a disc. 4. OPEN/CLOSE Opens and closes the disc tray. 5. DISPLAY Displays the playing status, title/chapter/time, etc. 6. SEARCH/SKIP Go to the next title/chapter/track or go back to the previous title/chapter/track. Front Panel (DVD-R129) 7. PLAY/PAUSE Plays a disc or pauses playback/recording. 8. P.SCAN Selects the progressive scan mode. 9. PROG ( ) Select TV preset Channels. Same as PROG button on the remote control. 10. REC Starts recording. 11. STOP Stops disc playback. 1. STANDBY/ON Turns the DVD Recorder on and off. 2. AV3 IN Connect external equipment. 3. DISC TRAY Opens to accept a disc. 4. OPEN/CLOSE Opens and closes the disc tray. 5. DISPLAY Displays the playing status, title/chapter/time, etc. 6. SEARCH/SKIP Go to the next title/chapter/track or go back to the previous title/chapter/track. 7. P.SCAN Selects the progressive scan mode. 8. PROG ( ) Select TV preset Channels. Same as PROG button on the remote control. 9. REC Starts recording. 10. STOP Stops disc playback. 11. PLAY/PAUSE Plays a disc or pauses playback/recording. English -13 Getting Started Front Panel (DVD-R130) 1. STANDBY/ON Turns the DVD Recorder on and off. 2. AV3 IN Connect external equipment. 3. DV-IN Connects extermal digital equipment with a DV jack. (such as a camcorder) 4. DISC TRAY 7. SEARCH/SKIP Go to the next title/chapter/track or go back to the previous title/chapter/track. 8. PLAY/PAUSE Plays a disc or pauses playback/recording. 9. P.SCAN Selects the progressive scan mode. 10. PROG ( ) Opens to accept a disc. Select TV preset Channels. Same as PROG button on the remote control. 5. OPEN/CLOSE Opens and closes the disc tray. 11. REC Starts recording. 6. DISPLAY Displays the playing status, title/chapter/time, etc. 12. STOP Stops disc playback. Front Panel (DVD-R131) 1. STANDBY/ON Turns the DVD Recorder on and off. 2. AV3 IN Connect external equipment. 3. DV-IN Connects extermal digital equipment with a DV jack. (such as a camcorder) 4. DISC TRAY Opens to accept a disc. 5. OPEN/CLOSE Opens and closes the disc tray. 6. DISPLAY Displays the playing status, title/chapter/time, etc. 7. SEARCH/SKIP Go to the next title/chapter/track or go back to the previous title/chapter/track. 8. PLAY/PAUSE Plays a disc or pauses playback/recording. 9. P.SCAN Selects the progressive scan mode. 10. PROG ( ) Select TV preset Channels. Same as PROG button on the remote control. 11. REC Starts recording. 12. STOP Stops disc playback. 14- English Front Panel Display Getting Started 1. Lights when a disc is loaded. 4. Lights when a DVD-R/-RW disc is loaded. 2. Lights in the record mode. 5. Playing time/clock/current status indicator. 3. Lights to indicate the timer record mode. 6. Lights in the progressive scan mode. Rear Panel 1. In from aerial connector 2. Out to TV connector 3. AV2(EXT) INPUT SCART Connector 4. AV1(TV) OUTPUT SCART Connector 5. DIGITAL AUDIO OUT(OPTICAL) Connects to an amplifier having a digital optical audio input jack. 6. DIGITAL AUDIO OUT(COAXIAL) Connects to an amplifier having a digital coaxial audio input jack. 7. AUDIO OUT Connects to the audio input of external equipment using audio cables. 8. VIDEO OUT Connects the input of external equipment using a Video cable. 9. S-VIDEO OUT Connects the input of external equipment using an S-Video cable. 10. COMPONENT VIDEO OUT Connects to equipment having Component video output. ¦ The Antenna connection does not pass output signal of DVD. To watch a DVD on NOTE your TV, you...
Otros modelos de este manual:lector de DVD - R129 DVD-R130 (4.22 mb)
lector de DVD - DVDR131 (4.22 mb)